boring mills and machining centers used for sale (3,262)

- Work piece up to 1530 x 1295 x 3500 Kg- Tool size up to 650 mm length and 30 Kg- Tool size up to 400 x 250 mm and 30 Kg- Extende feed rate up to 15 kN-100% ED- Coolant Filtration   - BLUM Laser NT- 3D Quick ser- MPC protection- 3D Measuring probe- DXF Import - Tool package 180 Tool HSK-100A- 2 x Cast iron angle plates 1500 mm - 15000 Working hours- 1e owner machine 

- 5 Axis Manufacturing cell with automation LANG 20 positions- Renishaw 3D Taster with pre-setter ball- LANG Preperation system with  vacuum- 25 Units LANG pallet with vice / clamp / chucks- Only 7155 Working hours !- New EUR 500.000

- NC Rotary table 1250 mm with 50 Rpm- Full C-Axis  360.000 with HIGH TORQ Drive- HSK-100 with 90 kW and 15.000 Rpm- 5 Axis simulteneous package- Last service in 2023 

- Spindle speed 10.000 Rpm- Coolant tank with IKZ 20 bar- Chip conveyor

- Full enclosure with vacuum extraction- Roller shutter door for crane loading- Pick-Up station for 3 angled milling head - Face machining possible to generously sized areas- Distance spil to table 140 - 740 mm- Pendel screen for splitted manufacturing- Coolant tank filtration 350 Liter- HR410 Handwheel HeidenHain- Double LTA Oil Mist -  Flexible, high-precision machining of large and complex parts, with reliable German build quality.

- Renishaw measuring probe MP-12- IKZ 15 Bar- Interface set- Performabnce software package- Monitoring B prepared not included

- Horizontal work load 200 Kg- Vertical work load 100 Kg- Torq 407 Nm- Runout 0.025 mm- Gear Ratio 72:1- Timing 2:1- incl. Tailstock MK 4- incl. Driver- incl. Cable  

 - Build with double hirth coupling- T slot 22 with Jump off 200 mm- Diameter off center hole 50 mm

- Portable / Transportable with levelling schoes AWF Fixatoren- ROD Heidenhain indexing scale with Dro - Left and Right rotation in 3 indexing feed rates- Power 18 kW- Quick posititining fixed angle 0-90-180-270 Gr

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK3 3 pieces -Type: 2x MK3/4 / 1x MK3/3 -Price/Fee: complete -Transport dimensions: 400/140/H50 mm -Weight: 4.6 kg

Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, clip-on holders, 4 pieces -Recording: MK5 -Type/Sizes: see photos -Submission/Price: complete -Transport dimensions: 530/320/H60 mm -Weight: 18.4 kg

CONTROLS  CNC controls. 3D MILLPLUS IT V600 WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 3   X-axis travel: 500 mm  Y-axis travel: 450 mm  Z-axis travel: 400 mmTABLE  table surface (left-right): 700 mm  table surface (front-back): 500 mm  workpiece load (max): 500 kgSPINDLE / HEAD  spindle revolutions (min): 20 /min  spindle revolutions (max): 10000 /min  tool fixture: ISO SK 40   drive power: 13 kWAXIS DRIVES  traverse velocity X (max): 24000 mm/min  traverse velocity Y (max): 24000 mm/min  traverse velocity Z (max): 24000 mm/minTOOL MAGAZINE  number of positions: 30   tool diameter max.: 80 mm  - with free neighbour positions: 130 mm  tool length max.: 300 mm  tool weight max.: 6 kg  tool changing time: 8 sATTACHMENTS  European CE standards: yes No cooling system; the machine is connected to a central cooling system. ...

Max. profile length for 3 side machining: 7600mm, Y axis: 845mm, Z axis: 620mm, max. travel speed X axis: 63m/min, max. travel speed Y axis: 60m/min, max. travel speed Z axis: 60m/min, swivel range A axis: −90°, 0°, +90°, max. spindle speed: 24,000/min, spindle power: 11kW S1, machining direction: top/front/rear/left/right, positioning accuracy: 0.1mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120mm, saw blade diameter: 180mm, software: eluCam, connected load: 30kVA, compressed air connection: 7bar, compressed air consumption: approx. 180l/min, length: 10,775mm, width: 3430mm, height: 2950mm, weight: 4.9t, operating hours reading: 1550h, standby: 6300h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2 layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, ...

Inv. Num. : 9187 Type: eCAB WorkCenter Producer: STEINHAUER Created: 2007 Parameters: Control system: Beckhoff Number of all tools: 18 pieces Max. tool diameter: 2-14 mm Working area: 2 200 x 1600 mm Cutting thickness: 5 mm Threads: M2-M12 Length: 3500 mm Width: 3000 mm Height: 2500 mm Weight: 3500 kg The tool clamp needs to be repaired.

The machine is in good technical condition, testing is possible after prior agreement. 5-axis HSC machining center designed mainly for the production of molds, models, aircraft parts and large precision parts. Travels X/Y/Z 2700 × 1100 × 1400 mm Table 2000 × 2000 mm Table load capacity 12,000–15,000 kg Spindle speed up to 24,000 rpm Spindle power 34–45 kW Control FIDIA C20 Tool magazine 42–84 positions Clamping HSK 63A (some configurations HSK 100) Rapid traverses X 50 m/min, Y 40 m/min, Z 30 m/min Machine weight approx. 38–38.5 t Positioning accuracy X 0.006 mm, Y 0.005 mm, Z 0.004 mm

surface area: 1168 x 508 mmmax. table load: 1800 kgtravel -x axis: 1016 mmtravel -y axis: 508 mmtravel -z axis: 508 mmspindle taper: SK40 spindle speed: 10000 U/minspindle capacity: 15 kWspindle torque max.: 99 Nmrapid traverse y/x/z axis: 28 m/mincontrol: HURCO MAX5 total power requirement: 20 kWweight of the machine ca.: 4,15 tdimensions of the machine ca.: 3,7 x 3,3 x 2,5 mThe machine is like new !, only 61 spindle hoursTool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 360 mm - Max. tool weight: 7 kg Accessories: documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 1321 x 610 mmmax. table load: 1800 kgtravel -x axis: 1270 mmtravel -y axis: 508 mmtravel -z axis: 508 mmspindle cone: SK40 number of spindle speeds: 12000 U/minspindle capacity: 15 kWspindle torque max.: 82 Nmrapid traverse y/x/z axis: 28 m/mincontrol: HURCO MAX5 total power requirement: 21 kWweight of the machine ca.: 4,25 tdimensions of the machine ca.: 4,1 x 3,35 x 2,6 mthe machine is like new!, only 136 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 250 mm - Max. tool weight: 7 kg Accessories: documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-axis: 1600mm, y-axis: 900mm, z-axis: 760mm, connected load: 38kVA, control: Ultimax, operating hours: approx. 50,000h, with CTS (coolant through spindle), Knoll AE 1058 coolant filtration and processing system. An on-site inspection is possible.

Key data: 1270 mm, 610 mm, 720 mm

Inv. Num. : 9177 Type: VCI-D 1270 Producer: MAS Created: 2002, GO 2022 Parameters: Control system: HEIDENHAIN Work table length: 1500 mm Work table width: 600 mm Maximum vertical spindle speed: 12000 1/min X-axis travel: 1270 mm Y-axis travel: 610 mm Travel distances Z-axis: 720 mm Machine weight: 10500 kg Equipment: Accessories

Key data: 1000 mm, 600 mm, 650 mm

Inv. Num. : 9176 Type: VCI-Q 1000 Producer: MAS Created: 2002, GO 2022 Parameters: Control system: HEIDENHAIN Maximum spindle speed: 8000 1/min X-axis travel: 1000 mm Y-axis travel: 600 mm Travel travel Z-axis: 650 mm Machine weight: 5500 kg Equipment: Accessories

Key data: 800 mm, 590 mm, 480 mm

Inv. Num. : 9175 Type: MCV 1000 5AX Producer: MAS Created: 2012 Parameters: Switch-on hours: 35507 h Hours: 20417 h Table diameter: 520 mm Number of synchronized axes: 5 Maximum table load (uniform): 400 kg X-axis travel: 800 mm Y-axis travel: 590 mm Z-axis travel: 480 mm Equipment: Accessories

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ...

X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501 ...

Key data: 40 mm, 240 mm

Machine Type: Column Drilling Machine Manufacturer: ERLO Type: TCA40 Year of manufacture: - Condition: used Offer will only be sent if a complete imprint is provided! Price 3.750 incl. 19% VAT / Fixed Price Location Warstein , Germany Reference number M-ERL-0526 DESCRIPTION We offer you a used column drill from the manufacturer Erlo. Performance in steel 40mm Strong gear feed Overall height 2350mm Weight 650kg Incl. solid 160mm machine vise. Availability: immediately Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

Speed range: 51-966rpm, feeds: 0.30-0.60mm/rev, number of drilling heads: 3, spindle mount: MK5, with coolant unit, electromagnetic feed clutch, multi-speed gearbox, T-slot clamping plate, motorized height-adjustable heads and automatic spindle feed, without documentation. An on-site inspection is possible.

Number of axes: 3, max. speed: 6000rpm, compressed air connection: 6-8bar, main motor power: 20HP, control system: Fanuc Series 18-M, weight: 12t, without documentation. An on-site inspection is possible.

Inv. Num. : 9165 Type: VF-8/40 Producer: HAAS Created: 2016 Parameters: Operating hours: 4500 h Work table length: 1626 mm Work table width: 914 mm Maximum table load (uniform): 1814 kg Maximum vertical spindle speed: 8100 1/min X-axis travel: 1626 mm Y-axis travel: 1016 mm Travel Z axis: 762 mm Machine weight: 11250 kg

Key data: 762 mm, 508 mm, 508 mm

Inv. Num. : 9164 Type: UMC 750 Producer: HAAS Created: 2022 Parameters: Operating hours: 4060 h Table diameter: 500 mm Maximum table load (even): 300 kg Number of axles: 5 pieces Maximum spindle speed: 8100 1/min X-axis travel: 762 mm Y-axis travel: 508 mm Travel Z-axis: 508 mm Machine weight: 6464 kg

CNC-controlled vertical machining center AXA VSC-3-3000-M Year of Make: 1995 Control: Heidenhain TNC 407 Technical data: X-travel: 3000 mm Y-travel: 420 mm Z-travel: 480 mm Table size: approx. 3000 x 500 mm Spindle holder: SK40 Speed range: up to 6000 rpm 22-fold tool changer Coolant system Heavy-duty travelling column construction Special features: Additional angle/universal milling head 4-/5-axis machining possible Noc Eey U Hy Tjg S Rrgswg Flexible machining of complex workpieces Ideal for toolmaking, mechanical engineering and single part production Machine is in neat condition. Viewing under power possible by arrangement.

For sale is a vertical CNC machining center STAMA MC015 based on FANUC ROBODRILL α-T14iA with FANUC 16i-M control. Equipment: 14-fold tool changer High-speed spindle BT30 / SK30 Tool Holder Coolant system Compact design FANUC CNC Control with additional swivel/dividing head 5-axis machining possible Technical data: Travel distances approx. X500 / Y380 / Z300 mm up to 24,000 rpm Year of construction 2000 Weight approx. 1800 kg