boring mills and machining centers used for sale (3,260)

4-axis CNC horizontal milling machine Hüller Hille BlueStar5 built in 2007 automatic pallet changer with 2 interchangeable pallets with 4 vices each (125), 4 additional interchangeable pallets (one with mineral casting clamping tower), Renishaw measuring system, high-pressure coolant system with additional filter device, coolant and air through the spindle, 40-fold tool magazine BT40, Operating hours and control see photo

Machine is still energized and fully operational. BAZ Matsuura MAM72 BJ 2006 spindle, and spindle motor were last replaced in 2018. Machine would be free immediately. Scope of delivery: -Machine - 2x additional pallet - Knoll high-pressure system - Machine running time 19,911 hours (see picture)

BAZ Heckert H55 (4 axle) BJ 2019

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve-Adapter sleeve: Morse taper sleeve adapter sleeve 2 pieces-Type: MK3/2-Shipping/Price: complete-Dimensions: Ø 24 x 112 mm-Weight: 0.2 kg/piece

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve-Morse taper sleeve/adapter sleeve MK4/2-Dimensions: Ø 31 x 125 mm-Weight: 0.4 kg

bore capacity in steel (diameter): 32 mmthroat: 300 mmbore stroke: 150 mm: MK 4 : 480 x 480 mm: 0,1 - 0,2 mm/U: M 22 (St 60) : 35 mm: 80-1170 U/min: 2,3 kW: 350 kg: 800 x 1000 x 2000 mmAccesories:-Machine light (built-in)-Coolant device in the foot (built-in)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional

Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional

x-travel: 2000 mmy-travel: 1200 mmz-travel: 1400 mmrotary table: 1800x1200 mm/mincontrol: Heidenhain 426 Number:: Maschinennummer 3112 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMilling head with continuous positioning along the B-axis, spindle speed 3,000 rpmAutomatic tool changer with 20 magazine positions, SK 50 tool holder2x chip conveyors in longitudinal direction, ejection on the leftCoolant systemFully enclosedThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. Yo ...

max. workpiece diameter: . mmmin. workpiece diameter: . mmworkpiece length: . mmclamping diameter max.: 550 mmVertikal stroke: 800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mmx-travel: 6000 mmy-travel: 2500 mmz-travel: 800 mmw- away: 600 mmrapid traverse: 10 m/minspindle speed:: 1600 UPM chip conveyor: vorne control: Seit 1998 Heidenhain Plate area: 6000x4000 mmpower capacity: 45 kWThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 60 mm, 350 mm

Radial Column Drilling Machine RSBM 5/60 Standard equipment: - Keyless chuck B 16, 1 - 16 mm - Tapered mandrel MK 5 / B 16 - Reducing sleeve MK 5 / MK 4 - Tool set with expulsion wedge - Instruction manual / CE The RSBM 5/60 offers plenty of space for extra-large workpieces: - Cubature 630 x 500 x 720 mm - Spindle projection 350 - 1600 mm Specifications: Drilling capacity in steel 60mm Threading capacity M46 Spindle holder (turning spindle) MK 5 Speed range 25 - 2000 rpm Speed levels 16 Quill stroke 315 mm Quill feed stages 16 Quill feed 0.04 - 3.2 mm/rev T-slots, width (table/base) 22/28 mm Drill head stroke 580 mm Spindle projection 350 - 1600 mm Drill head rotatable ± 180 ° Quill spacing base 1220 mm Quill spacing table 0 - 720 mm Drilling table area 630x500 mm Drilling table height 500 mm Motor power 4000 W Lifting spindle drive 1500 W Mai ...

Inv. Num. : 8526 Type: VC 1110 Producer: Trimill Created: 2005 Parameters: Control system: Heidenhain iTNC 530 Switch-on hours: 16373 h Hours: 14340 h Number of axes: 3 X-axis travel: 1100 mm Y-axis travel: 1000 mm Z-axis travel: 550 mm Machine weight: 16000 kg

Inv. Num. : 8525 Type: LG 1000 Producer: Hartford Created: 2017 Parameters: Control system: FANUC AI 100 Hours: 9285 h Number of axes: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Travel Z axis: 500 mm

Travel X/Y/Z: 500mm/400mm/500mm, table dimensions X/Y/Z: 750mm/500mm, max. table load: 900kg, tool holder: CAT40, spindle speed: 7500rpm, spindle power: 11kW, tool positions: 21, feed: 5m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: 2100mm/2300mm/2650mm, weight: approx. 2500kg. Documentation available. On-site inspection is possible.

Key data: 1250 mm, 1000 mm, 1000 mm

Basic machine data Used 5-axis machining center DECKEL MAHO Make: DECKEL MAHO Type: DMC 125 U duoBlock Year of Make: 2006 Condition: VERY GOOD Control: Name: Heidenhain iTNC 530 Travel: x-travel: 1250 mm // y-travel: 1000 mm // z-travel: 1000 mm Specifications: • 2-fold pallet changer • 60 speed tool changer • Spindle 12,000 rpm • HSK-A 63 interface • Infrarottprobe • Rinsing gun • IKZ 40 Bar • 600 litre tank with paper belt filter • Pallet 1000x800 • BLUM Laser • B-axis infinitely variable • C-axis as pallet carrier • Rinsing gun • Cabin flushing Additional pallets may be purchased. Machine completely measured according to new machines IB protocol. Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Key data: 800 mm, 700 mm, 600 mm

Basic machine data Used DMU 80 P Hi-dyn Make: DMG Type: DMU 80 P Hi-dyn Year of Make: 2001 Condition: VERY GOOD   Control: Name: Heidenhain TNC 430 electric handwheel Heidenhain HR410 Travel: x-travel: 800 mm // y-travel: 700 mm // z-travel: 600 mm // Specifications: • 5-axis simultaneous machining center • C-axis 900 x 630 mm • Rapid traverse X/Y/Z 40 m/min •Probe •Conveyor • Tool holder SK 40 • Spindle speed max. 12,000 rpm • Heidenhain 30-fold tool changer • 600l coolant tank • B-axis infinitely variable • IKZ ( internal coolant supply ) The machine is in VERY GOOD condition. Machine was measured according to new machine IB protocol. Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Key data: 1000 mm, 1100 mm, 810 mm

Basic machine data Used 5-axis machining center from REIDEN Make REIDEN Type RX 10 Year of construction 2014 Condition very good (used) Control: Name: Heidenhain iTNC 530 HSCI Handwheel: Heidenhain HR 410 Travel: X 1000mm / Y 1100mm / Z 810mm Specifications: • CNC rotary table pallet carrier • 2-compartment pallet changer 1000 x 800 • B-axis (milling head infinitely variable) • DDT spindle (Double Drive Technology) 0 – 3000 rpm 290 Nm 0 – 16,000 rpm 83 Nm • Spindle 20-16,000 rpm. • Tool changer 173 compartment • HSK – A 63 interface •Conveyor • IKZ 80 bar (pressure controlled) • Coolant tank with paper belt filter • Blowing air through spindle center • Blum Laser (Novotest) • Blum TC60 infrared pushbutton • Oil and emulsion extraction •Signal lamp The machine is in VERY GOOD condition. Prior sale is ...

Length stop, longitudinal stop, saw stop, material stop, motorized length stop, controlled length stop-Length stop: for various processing options-Max. stop length: 500 mm-Shaft: Ø 25 mm-Dimensions: 700/100/H110 mm-Weight: 3.6 kg

Multi-spindle head, multi-spindle drilling head, drilling gear -Manufacturer: Romai, multi-spindle head 2 spindles -Type SMSK 2/23 -Drilling tool holder: MK3 -min. distance drill bit: mm -Dimensions: Ø 220 x 455 mm -Weight: 27 kg

A CNC 5-axis vertical machining center Matsuura is available. Travel X/Y/Z: 550mm/440mm/580mm, spindle mount: BT40, speed: 15000rpm, tool positions: 40, pallet changer: 2-fold, diameter: 130mm. Machine dimensions X/Y/Z: approx. 2900mm/2550mm/3000mm, weight: approx. 6000kg, control: Matsuura G-Tech 30i, machine running time: approx. 19911h. Including 2x additional pallets and cooling lubricant system Knoll. Documentation available. On-site inspection is possible.

Key data: 800 mm, 700 mm, 600 mm

Basic machine data Used 5-axis machining center DECKEL MAHO Make: DECKEL MAHO Type: DMC 80 U hi-dyn Year of Make: 2000 Condition: GOOD - Used Control: Name: Heidenhain TNC 430 Travel: x-travel: 800 mm // y-travel: 700 mm // z-travel: 600 mm Specifications: • 2-fold pallet changer • 60 Way Tool Changer • Spindle 12,000 rpm • SK 40 interface • Preparation of infrared asters • Rinsing gun • IKZ 40 Bar • 600 litre coolant tank Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Anegbot 25236 Specifications: - Drilling capacity in steel ST 60 34 mm - Drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 160 mm - Projection 330 mm - Table with 2 T-slots 610 x 430 mm - Max. distance table – drilling spindle approx. 665 mm - 4 feeds 0.1 - 0.2 - 0.3 - 0.4 mm/rev - Drilling spindle speeds infinitely variable 70 - 1800 rpm -Lighting - Machine vise RÖHM - various HSS drills, countersinks, reducer sleeves - Tapping apparatus - Drive 400 V / 0.6 / 1.8 kW - Space requirement approx. W 1000 x H 2050 x D 1150 mm - Weight approx. 470 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve, extension sleeve-Morse taper sleeve: Morse taper extension MK2 2 pieces-Type: MK2/2-Total length: 400 / 475 mm-Shipping/Price: complete-Transport dimensions: 475/44/H22 mm-Weight: 2 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve-Adapter sleeve: Morse taper sleeve MK3-Type: MK3/2-Dimensions: 325/24/H24 mm-Weight: 1.0 kg

Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine-Manufacturer: Knuth, CNC tool milling machine type WF 5 NC-Clamping table: 800 x 330 mm-Travel: X/Y/Z 400/330/440 mm-Spindle holder: SK40-Quill stroke: 60 mm-Speeds from: 63 to 3150 rpm-Coolant system-Accessories: including extensive accessories see photos-Dimensions: Machine: 1500/1345/H1900 mm / Control cabinet 750/450/H1730 mm-Total weight: 1960 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve-Adapter sleeve: Morse taper sleeve MK5 2 pieces-Type: MK5/4-Shipping/Price: complete-Transport dimensions: 345/100/H50 mm-Weight: 7 kg

Offer 24190 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 140 mm - 8 drilling spindle speeds 100 - 2900 rpm - Min. / max. distance drilling spindle / table 110 / 405 mm -Lighting - Keyless chuck - Coolant device - Machine vise - Machine base - Drive 400 V / 0.75 kW - Space required: W 400 x H 1250 x D 600 mm - Weight approx. 200 kg

Offer 25234 Specifications: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Long spindle MK 3 - Drilling spindle speeds infinitely adjustable - Level 1 160 - 1125 rpm - Level 2 320 - 2250 rpm - Drilling spindle stroke 120 mm - Feeds 0.1 + 0.2 mm/rev - Projection 293 mm - Column diameter 115 mm - Table size 300 x 300 mm - With 2 T-slots 14 x 224 mm - Emergency stop button - Machine vise - 10 pcs HSS – drill bits 10 – 25 mm - Space requirement approx. W 500 x H 1750 x D 900 mm - Weight approx. 270 kg

Key data: 16 mm, 150 mm

KBM 16 T VARIO SET action Composed of: V-belt bench drill Model KBM 16 T VARIO 1 pcs vise 3' / 75 mm 2 pcs clamping screws T12mm 1 pcs.HSS twist drill cassette 1-13mm, 25 pcs. 1 pc. cutting oil spray 350 ml Specifications Drilling capacity in steel 16 mm Spindle holder (rotary spindle) MK 2 Speed range 340 - 2200 rpm Speed levels infinitely variable Quill stroke 90 mm Column diameter 60 mm T-slots, width 14 mm Drilling table stroke 275 mm Spindle projection 150 mm Drilling table swivel ± 45° Drilling table rotatable ± 180 ° Quill spacing table 360 mm Drill table area 243x243 mm Motor power 550 W Mains connection 230/50 V/Hz Cubature 195x195x360 mm Base plate area (lxw) 250x415 mm Height (total) 910 mm Weight 42 kg