sheet metal working used for sale (3,291)

STOPA understands what storage means. For this reason, the perfect UNPACKING TABLE has been developed to speed up the process of unpacking and depalletizing sheet metal packages. Increase your productivity by more easily separating sheet metal stacks from their carrier pallets. The unpacking table features a movable stamp frame on which the sheet metal package is placed at an ergonomic height. The packaging can now be easily removed, and the wooden pallets fall downwards. With the help of a forklift or crane, the sheet metal package can then be directly transported to the INCOMING GOODS STATION. Experience how easy unpacking can be. Ideal for any sheet format!  BENEFITS AT A GLANCE ˺ Facilitates the entire unpacking process. ˺ Easy separation of sheet metal packages and wooden pallets. ˺ Sturdy table with movable s ...

Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, StraighteningMachine equipped for tooling:FWR1307FWA 1306FWA 802TFWA 1002TLFA 120SLFA155T

- Thick turret WILSON tool system- Large package tooling WILSON- Auto indexing Rotation tools included- Laser Safety guids included 

- Range off edge radius Manual 20 - 500- Range off edge radius Automatic 150 - 500- Hydraulic Controllable forming roll drive- Hydraulic displacement drive- Clamping device without hole- Max. pressure manipulator 2000 Psi / 140 bar- Max. pressure press 5700 Psi / 400 bar- Max. speed forming roll 170 M/Min- Basket bottem- Knocker bottom- Pressure vessel bottom- Boiler bottoms- Flat floor- Plate base- diffuser bottom- Tank bottom- Tank bottom- Radar reflectors- Engine parts- Dispense air- Silo hoppers- Cooker hoods- Container parts- Hemispheres

- Extended end for profile bending rolls (Pipe & T-Angel)- Central lubrication- Digital readout position side rolls- Fully hydraulic machine- Hydraulic drop end- Hardned rolls

- Speeds 150 strokes- Hand ram adjustment 0 - 60 mm- Large tooling package ca 12 units - Wheeling tooling set (englisch wheel)- Vertical troath 250 mm- Horizontal Troath 400 mm

- Digiral read out position side rolls- Set universal rolls included- Hydraulic opperated

- Force lower rol upper roll 1178 Ton- Cone bending attachment- Hardned and grounded rolls- Width between upper and lower roll 200 mm- Power 180 kW

Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, StraighteningMachine equipped for tooling:FWR1307FWA 1306FWA 802TFWA 1002TLFA 120SLFA155T

- 2 x AMF PowerTube 46 with 60 Bar to ope/clamp - 4 x AMF K20 model with diameter 110 mm - 2 x AMF package hose / tube / cables - Zero point clamping system improving set up time optimized clamping during cutting and non cutting machining. - Pull-in locking force 17 kN - Holding force            55 kN

- incl. AMF BUR-10 switch box - incl. AMF remote control - New over EUR 6000 

Key data: 80 t, 2550 mm, 2050 mm

Safan CNCS 80-2550 - Hydraulic press brake - Incl. various bending tools - Year of construction 1986 Specifications - Capacity: 800 kN - Bending length: 2550 mm - Projection: 250 mm - Passage: 2050 mm - Stroke: 140 mm - Stop time: 140 ms - Stop travel: 600 mm - Operating pressure: 300 bar - Motor power: 5.5 kW - Operating voltage: 400 V - Dimensions WxHxD: approx. 3400 x 2600 x 1300 mm - Weight: 4800 kg

(1995) FJELLMAN Trimming Press Manufacturer: Fjellman Year of Manufacture: 1995 Press Force: 750 kN Opening Height: 1600 mm Number of Cylinders: 1 - Stroke Length: 1300mm - Diameter: 220/125 mm

Waterjet machine Flow Incl. new maintenance kit pump incl. documentation Year of Make: 2006 Manufacturer: FLOW Europe GmbH Manufactured Date: 11/05 Working area: (L x W x H): 3600 x 2000 mm Continuous working pressure: 3,800 bar High Pressure Pump: FLOW – Hyplex Pump Model HyPlex 50 Hours: 4342 hours Maintenance intervals: Regular according to maintenance schedule Last service at: 4102 hours (major pump maintenance) Software: Flow-Master PC Software Flow PATH Module, Version 6.0 Flow CUT Module, Version 6.0 Flow Master 6.0 Professional (FlowNest) Hardware clamping and clamping device, Flow, set-up and positioning aids with laser pointer, Devices 1x Sand Silo 1x Sand mixer unit Flow 1x Water Softening (WTS) 1x collision sensor defective Documentation package, Various spare parts, all pre-pipes and cables

: 1550 mm: 2,0 mm: 1,5 mmroll diameter: oben 90 mm: 560 kg: 2580 x 700 x 1250 mm mm- 2 central rollers driven by an electric motor- Swing-out upper beam- Conical bending device- separate control panel- self-braking main motor- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized rear roller adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 100 t, 3000 mm

Multi axis - Servo electric

4000w IPG / 3D Head / 8500mm bundle loader / 8500mm single bar loader / 6500mm unloader

With tooling

RICO HGR 310 hydraulic guillotine shears were built in 2013 in Portugal by Rico Tomás Castro Silva, LDA. The machine, designed for machining of sheet metal with a maximum length of 3050 mm, offers high reliability, efficiency and precision. The machining process is performed by means of high-quality cutting knives with the ability to adjust the cutting angle according to the thickness of the material. Constant press force and balance during cutting are ensured in turn by synchronised movement of the cylinders with the flow of hydraulic fluid from one cylinder to another. All this is complemented by a fully welded design, which has undergone a number of technological operations to minimise deformation and ensure maximum durability. The HGR 310 guillotine shears weighs 8700 kg. Technical specifications of the RICO HGR 310 guillotine shears - NC control - maximum workpiece thickness ( ...

CONTROLS  PLC SIEMENS S7 OVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 260 mm  sheet thickness max.: 6.5 mm  coil weight max.: 3 to  feed velocity max.: 20 m/min  feedstock transport direction: right to left COIL CHAIR  coil weight max.: 3 toDECOILER  design: single reel, traversable   sheet width max.: 260 mm  coil weight max.: 3 to  mandrel expansion range from: 460 mm  mandrel expansion range up to: 530 mmLEVELLER UNIT  sheet thickness max.: 6.5 mm  material cross section max. (450 N/mm2): 1500 mm²  number of leveller rolls: 21   diameter of leveller rolls: 50 mm  loop controls: yes decoiler KOHLER, type 3000.1 with coil-chairstraightening machine KOHLER, type KRM 50.260/2transfer bridge 6970 mm, hydraulic operated

sheet width: 1020 mmplate thickness: 1,5 mmdaylight opening: max. 85 mmweight of the machine ca.: 240 kgdimensions of the machine ca.: mSmallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness sLowering capability of the lower and bending beams 20 mmOn this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring.The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned.The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!The data for this ad was created with ModulMWS - the software sol ...

blade length: oben 211/unten 180 mmplate thickness: max. 6 mmround bar steel: max. 13 mmweight: ca. 19 kgSturdy shears body of quenched and tempered steel. Moving blade guides free of play (with low friction losses), blades of special tool steel, specially hardened and ground. Lever arm with counterweight spring for protection in the event of accidents, all pivot pins adjustable, all models with steplessly adjustable clamping arm.With compound action. Cuts sheet metals and round steel bar.Colour: Red-brownThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 8000 mm, 3 mm

Machine is in stabillier welded construction with 9 columns, 9 clamping cylinders and 36 coupling joints K38 mounted on a base frame The machine has the following equipment: CNC 8000 Control with Touch Screen TFT Color Display 17 Inch Attachment rail, brush table, upper beam with water seam groove Oil filling, fastening and levelling material, emergency stop rail via the Full length of the machine, integrated emergency stop operation in the foot pedal for upper and lower Bending beam, 2nd foot pedal for 2-man operation, upper bolster protection 2 short-part clamping fingers Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 8000 mm Sheet thickness max. steel: 3.0 mm Sheet thickness max. aluminium: 4.0 mm Sheet thickness max. VA: 2.0 mm Back gauge (max:.) 1150 mm Back gauge (min.): 150 mm Colo ...

tube diameter: 48,3 mmwall strength: 3,25 mmbending radius min.: max. 180 mmBending speed: 20 °/sectotal power requirement: 2,4 kWweight of the machine ca.: 700 tdimensions of the machine ca.: 3880 x 800 x 1250 mDescription:Round tube steel (S235): 60.0 x 6.0 mmRound tube stainless steel (S 355): 60.0 x 4.0 mmSquare tube steel: 50 x 50 x 4.0 mmRectangular tube steel: 60 x 40 x 2.0 mmmax. usable length: 3048 mmBending speed: 10°/secincluding tools (see photos)Mandrel is no longer available, can be retrofittedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.