sheet metal working used for sale (3,293)

Manufacturer TRUMPF Type L 3030 Year of construction 2005 Working range 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840D Laser power 2,700 watts Accuracy +/- 0.1 mm Equipment: Rotolas Closed machine frame PCS Automatic pallet changer Longitudinal conveyor belt for small parts/waste Laser Power Control Control Siemens: Open PC-based controller, simple operation, online help, diagnostic functions, maintenance hole book, technological data, teleservice Safety: Multi-beam photoelectric sensors, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust collector, protective cabin DIAS height control Automatic focus position adjustment AutoLas Plus Network connection (RJ45) by installation via teleservice The machine is in good condition. Location Germany, visit by appointment. Errors in the technical data and pri ...

cutting length: 3100 mm cutting thickness: 10 mm steel Controlled backgauge up to 1000 mm Side stop and table extensions Cutting length limitation Cut edge lighting Weight: approx. 10,000 kg

sheet thickness: 1.25 mm steel Roller center distance: 63 mm

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Inv. Num. : 5725 Type: A 89 TNCB Producer: CSM Created: 2014 Parameters: Maximum bending angle: 180 pcs Total power requirement: 15 kW The largest profile: 60x60x6 mm bending radius in the middle of the tube: 350 mm bending radius in the middle of the profile: 300 mm Machine height: 1200 mm Machine length: 4700 mm Machine width: 1200 mm Machine weight: 2500 kg

pressure: 11 tpunching cross-cut in cmm: diverse stroke: 50 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mhydraulic punching pressWith 3 punching tools.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - working width 2540 mm - max. cutting capacity St 40 4 mm - mot. Cutting angle adjustment - Cut gap. by scaled adjustment screws - Number of hydraulic holders 14 pcs - Mot. backgauge with positioning. 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per min - Hydraulic drive 400 V / 7.5 kW - Table height 1030 mm - Space requirement approx. W 2500 x H 1630 x D 2150 mm - Weight approx. 3600 kg - with: - Sheet metal holding pneum. supported - front angle stop + support arms - Electronic cutting depth adjustment - Cut line lighting - E-foot switch

Bending Lenght 3050 mm Bending force 135 ton Crowning Type Motorised Controller ModEva 19T CNC back gauge X - R Z manuel

30 ton 1250 x 2500mm

The STIGAL DYNAMIC SPEED HQ 1500X3000 plasma cutter was manufactured in 2013 by the Polish company Stigal. A computer-controlled thermal cutter is designed for cutting out shapes from a sheet of metal. It is equipped with, among others in: CNC G-CODE control, CAD / CAM WRYKRYS software, CEBORA PROF 165 HQC aggregate, or a cover protecting the operator's eyesight. The cutter's cutting width is 1500 mm, length is 3000 mm and the thickness is 20 mm. The machine's torch moves at a speed of 330 mm / s and cuts metal sheets with a maximum thickness of 20 mm. The total weight of the machine is 3 tons. Technical data of the STIGAL DYNAMIC SPEED HQ 1500X3000 cutter - cutting length: 3000 mm - cutting width: 1500 mm - maximum material thickness: 20 mm - maximum cutting thickness: 20 mm - permissible table load: 150 kg / m2 - maximum travel speed: 90 m / min - type of burner height adju ...

Four rollers calander make OMEC Mod. FX4 190 1330 x2.5 / 3.0 Year 2019 NEVER USED - PRACTICALLY NEW Siemens CNC.

The Diper Design DEVANADORA D5-EH-V35 sheet profiling machine was built in 2004 by the Spanish company Diper Design. The machine is designed for profiling metal sheets with a maximum width of 1250 mm. The mandrel diameters (closed / open) are 450 and 550 mm, respectively, and the roller diameter is 1500 mm. The profiling machine works with a bending speed of 35 m / min. Roof flashings were produced on the machine. By using an appropriate matrix on the machine, it is possible to produce e.g. gutters, metal shelves, window sills, profiles, etc. The total weight of the machine is 5 tons. The machine is fully operational and ready for further work. Technical data of the Diper Design DEVANADORA D5-EH-V35 profiling machine - bending speed: 35 m / min - maximum sheet width: 1250 mm - roll diameter: 1500 mm - spindle diameter (closed): 450 mm - spindle diameter (open): 550 mm – maximu ...

Hand lever plate shears and profile steel shears Knife length 400mm Cuts sheets up to 5mm Cuts round steel up to 13mm Heavy and stable design with foldable storage table. Mounted on base More hand lever plate shears in stock, also for round steel and profiles!

Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!

I-beam section - upend: 100 x 20 (d 2100) mmtube diameter max.: 100 x 3 (d 3000) mmL-beam: 80 x 80 x 8 (d 2000) mmsquare material: 50 x 25 x 2 (d 600) mmbar material - diameter: 60,0 (d 1000) mmI-beam section - flat steel: 120 x 30 (d 600) max. 140 mmtool taper: 80,0 turning speeds: 4,2 U/minweight: 1600 kgdimensions: 1240 x 1375 x 1540 mmDomestic equipments:- Welded steel structure (St-52)- Rollers are driven by 3 separate hydraulic motors- Stepless speed- Special steel gears- Shafts are made of special steel, hardened and ground- Manual lubrication- Guide rollers are hydraulically adjustable- Lower rollers are hydraulically movable up and down- Infinitely adjustable speed of the lower rollers, move afterbelow and above- Digital display for lower rollers- Separate and movable control panel- Horizontal and vertical operation- Production quality certified according to CE, ISO 9001 - 2015, ...

Specifications: - Total payload driven + running unit 60000 kg - Payload per container device 30000 kg - Workpiece diameter 500 - 4000 mm - Center distance of the support rollers mot. adjustable - Roll diameter 500 mm - Roll width 470 mm - infinitely adjustable rotation speed 100 - 1500 mm/min - Torque 5132 Nm - Handheld remote control for re- and li.-run - Drive 400 V - Both units are mounted on guide rails and - can be moved manually in parallel - Space requirements Unit approx. W 2800 x H 1200 x D 1600 mm - Platzb. with running unit approx. W 2800 x H 1200 x D 1200 mm - Weight applied. Unit approx. 4800 kg - Weight with running unit approx. 3800 kg

Specifications: - Total payload driven + running unit 40000 kg - Payload per container device 20000 kg - Workpiece diameter approx. 500 - 3500 mm - Center distance of the support rollers adjustable via trapezoidal thread spindle - Roll diameter 500 mm - Roll width 150 mm - driven single-sided drive - infinitely adjustable rotation speed - Handheld remote control for re- and li.-run - Drive 400 V - Both units are built on rail chassis - Space requirements Unit approx. W 3800 x H 1150 x D 1350 mm - Platzb. with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight applied. Unit approx. 2500 kg - Weight with running unit approx. 1800 kg

4000 x 2000mm 4000w LOW HOURS

sheet width: 2020 mmplate thickness: 2 mmdistance between columns: 2030 mmbending angle max.: 135 °total power requirement: - kWweight of the machine ca.: 1,22 tdimensions of the machine ca.: 2,5 x 1,0 x 1,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6 mmpre-bending: 4 mmupper roll diameter: 210 mmlower roll diameter: 190 mmside roll diameter: 170 mmtotal power requirement: 7,5 kWOverall size: 5200x1400x1300 mmmachine weight ab.: 5.400 kgAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mmplate thickness: 6 mmpre-bending: 4 mmupper roll diameter: 160 mmlower roll diameter: 140 mmside roll diameter: 120 mmtotal power requirement: 2,2 kWAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3000x1500mm

Combination laser punching FINN POWER LB6 Year 2003 3000x1500

roll diameter: 76-86 mmShaft diameter: 20 mmShaft revolutions: 11 U/minBending capacity round tube: 30 mm: 25x6 mmAngle iron: 20x20x4 mmDrive: 0,18 kWrange L-W-H: 530x420x500 mmweight: 80 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mmplate thickness: 10 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 9,8 tdimensions of the machine ca.: 4,15 x 3,55 x 2 mBrand: DurmaType: DHGM 3010Year of make: 2002Knife length: 3.000 mmPlate thickness: 10 mmElectric backstopMachine dimensions (lxwxh): 4.150 x 3.550 x 2.000 mmMachine weight: 9.800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 , 1 , 1300

Payload 1000 - 1250 kg Band width 305 and 505 mm Spreading range - 375 -520 mm Coil outer diameter 1300 mm without cabinet and control

sheet width: 3100 mmplate thickness: 12 mmdistance between columns: 3260 mmback stop - adjustable: 3 - 1250 mmpower capacity: 37 kWvoltage: 400 Vweight of the machine ca.: ca. 14 tdimensions of the machine ca.: 4,00 x 4,00 x 2,20 mCNC-controlled plate shearwww.kefischer.deThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6,0 mmpressure: 18 tcutting angle - upper blade: 90 °blade length: 225 x 225 mmvoltage: 380 Vtotal power requirement: 5,5 kWweight of the machine ca.: 650 kgdimensions of the machine ca.: 1,10 x 0,80 x 1,05 m- Angular stops adjustableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 45 mmsquare edge steel: 42 mmL-beam: 140 x 13 mmflat steel: 350 x 20 mmpressure: 550 kNthroat: 305 mmnotching: rectangle tool: mmtotal power requirement: 5,5 kWweight of the machine ca.: 1260 kgdimensions of the machine ca.: 1360 x 750 x 1565 mm2 working cylinder with 2 separated electric foot switch for 2-people-handlingNew notching table, new knife for the rectangle notcher and new punching table includedFor further information please see brochure.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.