CNC Turning Centers used for sale (179)

CNC Lathe Manufacturer: Gildemeister Type twin 42 Year of manufacture 2005 Control Siemens 840D Turning length 210mm 2 X 12-fold turret all places are powered Engine A 83700 Spindle A 50809 Machine has a defect in the pick-up spindle, probably bearing With Breuning Profimat bar loading magazine

turning diameter: 65 mmturning length: 150 mmcontrol: Siemens 840D spindle passage: 75 mmturning length: 150 mmc-axis: 2x 0,001 °gripping station: 65 mmspeeds: 5000 U/minrapid traverse: 30 m/minturret (x-stations): 3x12 Number of axles: 10 St.number of toolholder-holes: 36 chip conveyor: ja / yes kWcoolant filtering unit: ja / yes kWNumber of working hours: 35000 htotal power requirement: 22 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 4,4 x 2 x 2,3 + Iemca mbar loader: Iemca Master 880 DMG Sprint 64 Linear CNC lathe, built in 2007, 10 axes, 2 spindles,3 turrets with Iemca Master 880 loading magazineAccessories:a large number of tool holdersin total 104 off, 24 of them are driven tool holderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC turning and milling center MacTurn 30 Control: OSP-U100L Year of Make: 2001 Internal machine no. 51 Turning length: 1,000 mm Turning diameter: max. 500 mm Circumferential diameter over bed: 500mm Circumferential diameter over face slide: 500 mm Tool holder: SK 40 Tool positions: 60 places Travels: X-axis: 430 mm Y-axis: 190(+/-95) mm Z-axis:1,090 mm C-axis: 0.001° - Three-jaw chuck SMW Autoblok - Tailstock programmable - Chip conveyors - Paper belt filter system with high-pressure pump - Oil mist extraction - Touchsetter - One Touch IGF - Door Automatic - Large baking package - Large tool package

3 slides 3 revolvers with 12 positions each driven main and subspindle 2 C-axis Y axis, workpiece unloading device, high pressure coolant system with paper filter chip conveyor, Control: Siemens 840D, Country of origin: Italy, Operating hours: 28.900, Number of spindles: 2, Number of linear axis + C axis: 8+2, Max bar diameter [mm]: 65, Spindle speed [rpm]: 5.000, Spindle motor [kW]: 20, Auto bar loader: Iemca Master 880 P/R, Machine weight approx. [kg]: 9.000

The machine is in good technical condition, testing possible after prior agreement. Max. rotating diameter 480 mm (approx. to the current design of the workpiece removal blade) Max. machined diameter 340 mm Max. turning length 785 mm Collet + 10 hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) hydraulic through-cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 end, bore dia. 80 mm, integrated motor Speed ​​range 45 - 5,000 min-1 Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001 increment Secondary spindle Speed ​​range 50 - 6,000 min-1 Power/continuous operation 11 kW/7.5 kW Spindle with end dia. 14O mm, bore dia. 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) hydraulic thr ...

turning diameter: 210 mmturning length: 700 mmcontrol: Okuma OSP-E 100 L total power requirement: 35,7 kVAweight of the machine ca.: 7,1 tdimensions of the machine ca.: 2660 x 2000 x 2330 mCNC turning and milling center with C-axis and Y-axis,2 turrets, and subspindle.CNC control: Okuma OSP-E 100 LMaximum turning diameter: 210 mmSwing over bed: 400 mmDistance between spindle noses: 960 mmMain spindle:Spindle bore: 53 mmSpeed range: 50 to 6000 rpmMotor power: 11/7.5 kWSubspindle:Spindle nose: JIS A2-6Speed range: 38 to 5000 rpmMotor power: 11/7.5 kWZ-axis:Travel: 700 / 700 mm (ZA + ZB)Rapid traverse: 40000 mm/minW-axis:Travel: 940 mmRapid traverse: 40000 mm/minX-axis:Travel: 167 / 192 mm (XA + XB)Rapid traverse: 30000 mm/minY-axis:Travel: 92 mm (+50/-42 mm)Rapid traverse: 15000 mm/minC-axis:Indexing: 360° x 0.001°Rapid traverse: 400 rpmDisc turret:2 x 12 stationsTool holder mount: VDI 3 ...

Used machine Machine type: CNC turning and milling center Model: CTXalpha 500 V6 Manufacturer: DMGMORI Control: Celos with Siemens 840D si First commissioning: 2022 #001272 Technical data Turning diameter max. approx. 240mm Turning diameter standard approx. 200mm Chuck size approx. 210mm Turning length approx. 480mm Rod diameter max. approx. 52/option65mm Turret Stations 12 X-axis approx. 210mm Z-axis approx. 525mm Spindle speed 1/2 approx. 5000/6000 rpm Speed AGW max. approx. 5000U/ Rapid traverse X/Z/Y 30/30/22.5 • Main spindle 5000 Ulmin • Hydraulic 3-jaw chuck 210 mm • Sub-spindle 6000 Ulmin • Hydraulic 3-jaw chuck 170mm • 12 station turret VDI 30 Trifix • Tool drive for all stations • C-axis • Y-axis • Alternating speed • Coolant supply through the sub-spindle • Swivelling tool presetter • Coolant spray gun, 5bar • CTXalpha  ...

turning diameter: 500 mmturning length: 1200 mmcontrol: Siemens 840D greates pass round over bed: 700 mmMain spindle:: turning speed range - main spindle: 20 - 5000 min/-1power capacity - main spindel: 25 /34 kWC-Axis: 0,0001 °spindle diameter: 65 mmmilling spindle: milling spindle motor: 23 / 13 kWmilling head speed: 12000 U/minb-axis: +/- 120 °axis stroke:: x-axis: 490 mmy-axis: +/- 100 mmz-axis: 1300 mmfeeds:: rapid traverse ( X / Y / Z ): 60 / 22,5 / 30 m/minfeed power: 5,6 / 5,6 / 7,4 kNnumber of toolpositions: 24 pos.tool taper: HSK A 63 total power requirement: - kWweight of the machine ca.: 15 tdimensions of the machine ca.: 6 x 3 x 2,3 mCNC turning and milling center - 5 axes simultaneous- CNC control Siemens 840D Ergo Line with ShopTurn- C-axis (0.0001°)- Milling head with B-axis- Y-axis- Coolant device/paper belt filter (through Spindle)- Chip conveyor- Tailstock- SMW A ...

Used machine Machine Type: CNC Swiss Automatic Lathe Model: Sprint32/8 Manufacturer: DMGMORI Control: Fanuc 32i First commissioning: 2019 #001328 Location: Germany T-main and sub-spindle - Y-axis on carriage 1 - Y-axis on carriage 2 - C-axis on main spindle - C-axis on sub-spindle - Tank for chips included Coolant Pump - Workpiece unloading belt - Flushing for counter-spindle pliers - Hinge belt chip conveyor - Signal lamp 4-colour - IEMCA Boss 338/32HD bar feeder This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

control: FANUC Series 31i Model 5 turning diameter: 540 mmturning length: 1040 mmc-axis: indexing: 0.001 °turning speeds: -5000 U/mintool taper: ASA A2-6 Top turret tool hodler:: 12 y-travel: 170 (+/- 85) mmrapid traverse X-axis: 36 / 24 m/minrapid traverse Z-axis: 36 / 26 m/minOverall size: 8000 x 3000 x 3000 mmweight of the machine ca.: 12000 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CK 50 CNC turning center was built in 2022. This state-of-the-art, extremely efficient machine is used in both unit and series production. Workpieces with a maximum diameter of 570 mm and a length of 500 mm are machined by means of a reliable spindle and cutting tools taken from a 12-position turret. The spindle, driven by a high-powered motor reaches a speed of 4200 rpm and moves in two X,Z axes with feeds of 270 mm and 610 mm respectively. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the turning process. The CNC CK50 lathe has an inclined bed, which increases the stability of the design through better distribution of loads during machining. This solution reduces the risk of vibration and oscillation, thus increasing turning accuracy and giving the ability to perform more complex operations. It also makes it easier to evacuate the  ...

CNC Lathe TAKISAWA TMM 250 M1 CNC Model Fanuc Main spindle nose ASA 8 Main spindle power 22 Kw Main spindle bar passage 75 mm Swinnable diameter 350 mm Swinnable length 800 mm Main spindle rpm 4000 Number of Tool Turrets 2 Tool positions first turret 15 Motored positions first turret 15 X axis travel first turret 265 mm Y axis travel first turret + - 50 mm Z axis travel first turret 760 mm Tool positions second turret 15 Motored positions second turret 15 X axis travel second turret 228 mm Z axis travel second turret 760 mm Rapid traverses X Y Z 30 m/min High pressure coolant yes Counterspindle yes Nose spindle ASA 6 Counterspindle rpm 4000 Counter spindle power 18.5 Kw Counter spindle Z travel 800 mm The machine is visible operating in our warehouse in Gussago BS. Mimu machine tools

Used machine Machine Type: CNC Turning Center Model No.: NLX3000Y/3000 Manufacturer: DMGMORI Control: Celos Year of Make: 2020 #001355 Turning diameter max. approx. 420 mm Turning diameter standard approx. 310 mm Chuck size approx. 300 mm Turning length approx. 3,123 mm Rod diameter max. approx. 90 mm Turret stations approx. 12 X-axis approx. 280 mm Z-axis approx. 3,170 mm Y-axis approx. 120 (±60) mm Tailstock approx. 3,164 mm Spindle speed max. approx. 3,000 rpm Speed AGW max. approx. 6,000 rpm Rapid traverse X/Z approx. 30 m/min Rapid traverse Y approx. 10 m/min Rapid traverse C approx. 300 rpm Power consumption approx. 54 kVA Compressed air bar,L/min approx. 5, 100 bar,L/min Footprint L x W x H approx. 8.30 x 3.50 x 2.41 m (without chip conveyor) Machine weight approx. 14,200 kg Main spindle 22/18,5KW • 3jaw chuck set • rpm 3000 • 12 station turre ...

turning diameter: 430 mmturning length: 1500 mmcontrol: OSP P300 turning diameter over bed: 670 mmturning dia. over face-slide: 480 mmWorkingspindle:: power capacity - main spindel: 30/22 kWturning speed range - main spindle: 0 - 3000 U/minmax. bar capacity: 95 mmspindle head: 11 JIS A-2 / ASA travel -z axis: 1500 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 30 m/mintravel -x axis: 270 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 25 m/minC-Axis: 0,001 °Rapids C - Axes: 200 min -1rapid traverse: 12 m/mintravel -y axis: 120 mmtotal power requirement: 29 kVAweight of the machine ca.: 8,6 tdimensions of the machine ca.: 4,3 x 2,25 mCCNC turning and milling centerequipped with:- CNC control OKUMA OSP P300- 12-fold Tool Revolver for driven tools- Tailstock- Chip conveyor- self-centering Chuck 315 mm Autoblock- 2 motorized radial modules- 2 axial modules for thermal expans ...

CNC Turning and Milling Center Okuma LT 2000 EX -MY 2pcs Control: OSP-P300L Year of Make: 2013 Turning diameter over bed: 400 mm Center spacing: 960 mm Turning diameter: 210 mm Speed: 50 – 6,000 rpm Sub-spindle speed 50 – 6,000 rpm Travels: W-axis 730 mm X-axis 205 mm C-axis: 360 degrees (0.001) 2 tool turrets with 16 places each (all places driven) Equipment: - Chip conveyors - Paper belt filter system with high-pressure pump - 2x 3-jaw chuck Kitagawa - OGL gantry loader with approx. 5 kg load capacity - Stacking magazine 20 places - Touchsetter - Renishaw touch probe - Extraction system - Various accessories

x-travel: 750 mmy-travel: 210 mmz-travel: 1150 + 100 mmcontrol: Fanuc MSX-701III Maximum turning diameter: 660 mmMax. turning length: 1498 mmDiameter over cross slide max.: 400 mmnumber of spindle speeds: 3000 U/mintool piece magazine with: 40 Plätzenturret: 10 Fachtotal power requirement: 90 kVAweight of the machine ca.: 26,6 tdimensions of the machine ca.: 5301 x 2997 x 2788 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully functional CNC turning and milling center CNC Lathe Manufacturer: Index Type: G250 G 250 Year of Make: 2004 Location of the machine: 76661 Philippsburg The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.

turning diameter: 376 mmturning length: 760 mmcontrol: FANUC I-Series Plus greates pass round over bed: 780 mmswing diameter over slide rest: 630 mmmax. turning diameter: 376 mmspindle turning speed range: 4000 U/minspindle drive motor: 22 / 15 kWspindle nose: ASA A2-8 spindle bore: 81 mmbar material dia.: 76 mmc-axis: 0,001 °chucking diameter: 255 mmNumber of tools: 12 St.travel -x axis: 260 (72 + 188 ) mmtravel -z axis: 830 mmtravel -y axis: 105 (+/- 52,5) mmdiameter of quill: 100 mmquill stroke: 100 mmtailstock taper MT: MT 5 total power requirement: 41,98 kVAweight of the machine ca.: 6,1 tdimensions of the machine ca.: 4,0 x 2,5 x 2,2 mCNC control FFANUC I-Series Plus- chip conveyor- driventools 5000U/min, 7,5kW- C-axis- hydraulic unit- tailstock- coolant 7 bar- bar loader interfaceCapto C3 straight chair: 2Capto C3 90° chair: 1ER20 Capto chuck: 10ER32 Capto chuck: 4Weldon-to-Capt ...

CNC milling turning center OKUMA Multus B400 TECHNICAL FEATURES: Year: 2007 NC Type: OSP-P200L Distance between points: 1500 [mm] Maximum diameter Turning time: 710 [mm] Permissible diameter above the carriage: 710 [mm] X-axis travel: 690 [mm] Y-axis travel: -115 / +115 [mm] Z-axis travel: 1545 [mm] W-axis stroke: 1550 [mm] B-axis indexing accuracy: 0.001 [°] Maximum rotational speed Milling spindle: 6000 [rpm] Maximum power Milling spindle: 11 [kW] Maximum torque Milling spindle: 65.7 [Nm] Coolant milling spindle: HSK-A63 Tool magazine capacity: 40 Maximum length Tool Size: 300 [mm] Maximum diameter Tool No.:130 [mm] Maximum weight per tool: 10 [Kg] X-axis fast feed speed: 4000 [mm/min] Z-axis fast feed speed: 40000 [mm/min] Y-axis fast feed speed: 26000 [mm/min] W axis fast feed speed: 12000 [mm/min] Spindle Nose: JIS A2-8 Minimum speed. Spindle: 38 [rpm]  ...

CONTROLS  CNC controls MITSUBISHI M720BM BASIC FUNCTIONS  number of spindles: 2   number of turrets: 1   live positions: yes   number of c-axes: 2 WORKING RANGE TURNING  swing diameter (max): 700 mm  turning diameter (max): 350 mmMAIN SPINDLE  spindle revolutions (max): 4000 /min  spindle bore diameter: 90 mm  c-axis: yes X/Z SLIDE  - rotation speeds (max): 6000 /minTOOL MAGAZINE  number of positions: 24 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 7500 kgATTACHMENTS (TURNING)  chip conveyor: yes   coolant unit: yes   hydraulic system: yes   European CE standards: yes Machine in a good conditionThe spindle guides need to be replaced.Machine equipment (1500.- CHF (below)):- 1x double face and longitudinal turning tool holder- 3x face and longitudinal turning tool holders- 1x boring  ...

Key data: 254 mm, 700 mm

Turning milling center Manufacturer: DMG Mori Type NLX 2500/700 Control M730UM Mitsubishi with Celos Turning length 700mm 12 tool stations, all 12 of which are driven Y-axis Bar passage 91mm Program runtime Head1 4036h Cumulative cutting time Head 1 2058h Machine running time 8605h Bar loading magazine TOP Automazioni 3m Incl. tool package NP 64.000 euro Machine is in TOP condition

greates pass round over bed: 670 mmswing diameter over bed slide: 490 mmmax. turning diameter: 490 mmcontrol: SIEMENS - 840 D main spindle bore: 115 mmexternal spindle dia. in forward position: 160 mmCNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,- 3 jaw chuck,A machine video from the production plant will be shared on request.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 42 mm

Equipped with Iemca Boss 545 barfeed and Mitsubishi M700 Control, the lathe has always worked with oil, in regular working order (just replaced bearings and ball screws of the X1/Z1 axes and 2 drives)

turning diameter: 250 mmturning length: 600 mmcontrol: FANUC Series 31i-Model A total power requirement: 23 kWweight of the machine ca.: 7,7 tdimensions of the machine ca.: 2.880 x 2.130 x 1.990 mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DMG Turning lathe GILDEMEISTER CTX 510 ecoline V3

turning diameter: 220 mmturning length: 450 mmcontrol: Siemens 840 D main drive DC: 27 kWtotal power requirement: 27 + 8,5 + 5 + X kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 10 x 2 x 2 mMovie:https://www.youtube.com/watch?v=OffdO1J4G5YThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 700 mm, 5050 mm

CNC Turning Milling Center Manufacturer: Doosan Type 700XLY ll Year of construction 11/20 IBN 2021 Control Fanuc iSeries Plus max. turning length 5050mm max. turning diameter 900mm 12-fold tool turret, all 12 of which are driven Full Y-axis and C-axis Switch-on hours approx. 25,000 on 22.05.25 Spindle hours approx. 5,000 on 22.05.25 Machine is in a very good condition. As accessories there are A large bezel SMW Three-jaw chuck 630mm Face Plate 800mm div. Powered Tools Various steel holders Accessories had cost 80,000 euros Machine is sold due to the poor order situation

turning diameter: 380 mmturning length: 580 mmswing dia.: 695 mmX-Axis movement: 234 mmY-Axis movement: 100 mmZ-Axis movement: 575 mmMinimum indexing C-Axis main Spindle: 0,0001 °Number of tools on turret: 12 Number of driven tools: 12 xSpindle speed driven tools: 4500 1/minSpindle motor driven tools: 5,5 / 3,7 kWTool type: Mazak VDI control: MATRIX NEXUS II Main Spindle:: Spindle Speed: 5000 1/minspindle motor: 26 / 22 kWspindle bore diameter: 76 mm2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 11 / 7,5 kWspindle bore: 80 mmtotal power requirement: 43 kVAWeight: 5,5 tdimensions of the machine ca.: 2,8 x 2,1 x 1,9 m- Mazatrol Nexus II CNC control- Main and counter spindle- 12-station tool turret with driven tools and Y-axis- 3-jaw chuck-- Main: 8-- Counter: 6- Automatic presetting (Tool Eye).- Automatic workpiece catcher.- Side belt chip conveyor (Mayfran).- Enhan ...

Key data: 1500 mm, 4500 mm

Versatile turning/machining center for full-fledged turning and complex drilling and milling. Turning diameter 1500 mm Center width 4500 mm X Travel 1000 mm Y Travel 350 mm Z Travel 5000 mm - 4 Sheet bed machine - Powerful spindle box with backlash-free C-axis - Full-fledged milling in 3 axes (Y-axis = 340 mm) - Direct measuring system in each CNC axis - Infinitely adjustable motor milling spindle - Klaaßen motor milling spindle 37kW/4000 1/min/330 Nm (S1) - Automatic tool change for turning and milling tools - Steady rests and tailstock can be completely driven over - Internal milling head - Grinding support - Extensive range of accessories available The machine has been regularly serviced and is in very good technical condition. There are technical drawings and parts lists for the components and assemblies of the machine. Documentation and technical data ...

turning diameter: 190 mmturning length: 235 mmcontrol: FANUC/Mori MSX 501 spindle turning speed range: 50-5000 U/minturret head: 2x 16 weight of the machine ca.: 7.5 tY- & B- axesMisc. accessoriesmore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Datenblatt / Datasheet: Control: OSP P200-M Travels X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degree] 1; 360 degree incrementing Tool Changer 200 ATC MAS BT50 Tool slots: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet pool 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Further features: – Renishaw Sample – Renishaw Tool Break Control – Mayfran Concept with high-pressure pump In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both ele ...

turning diameter: 190 mmturning length: 235 mmcontrol: FANUC/Mori MSX 501 spindle turning speed range: 50-5000 U/minturret head: 2x 16 weight of the machine ca.: 7.5 tY- & B- axesMisc. accessoriesmore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Okuma Macturn 30 1SW 1000, BJ 1999, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 Bar, gear milling option, approx. 12500 spindle hours, HS Big Bore, GS Standard Bore, good condition In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage. Delivery: free loading truck 100% payment before loading upon invoicing. All information is non-binding, we expressly reserve the right to make errors and prior sales. The sale is made under exclusion of any warranty claims. The goods remain the prop ...

turning diameter: 640 mmturning length: 1.185 mmcontrol: SINUMERIK 840D swing diameter: 640 mmdistance of spindle heads: 1500 mmslide I:: X1 / Y1 / Z1 / B slide travel X-axis: 550 mmslide travel Z-axis: 180 mmZ- Travel: 1.185 mmB - axis: 240 °feed x-axis: 0 - 40.000 mm/minfeed y- axis: 1 - 24.000 mm/minFeed z- axis: 1 - 70.000 mm/minfeed B-axis: 1 - 20 1/minrapid traverse X/Y/Z: 40 / 24 / 70 m/minfeed capacity X/Y/Z: S6: 7,00/11,00/7,50 kNtool taper: HSK 63 turning speed milling-spindle: 10 - 12.000 1/minpower capacity at 100 % load: 13,20 kWpower capacity at 40 % load: 22,00 kWtorque milling spindle: 60 / 100 Nmtool magazin:: no. of workpieces in the magazine: 46 Stücktool length - max.: 350 / 200 mmtool diameter: 80 mmwotkpiece diameter with 2 vacant positions: 120 mmweight of tools max.: 6 / 10 kgslide II:: X2 / Z2 slide travel X-axis: 180 mmZ- Travel: 1.050 mmfeed x-axis: 1 - 24.0 ...

Okuma Multus B300-W 6 Axis Lathe-Milling Machine Ffebm Noyg Rf Njrbw Tju -Okuma OSP P200L -BJ 2008 -Cutting Time 10,500 h -H1 milling spindle 6000 rpm -Main spindle 3800 rpm, Rota NC 315-86 -Sub-spindle 5000 rpm -ATC 60 System HSKA-63 (60 Tools) -Geometry very good -Marpos Tool Sensor Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, a visit to our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage. Delivery: free loading truck 100% payment before loading upon invoicing. All information is non-binding, w ...

turning diameter: 400 mmturning length: 1100 mmcontrol: Siemens Sinumerik 840D SL greates pass round over bed: 500 mmSwing dia. over traverse guideway: 370 mmMain spindle:: Max. rpm: 5000 min/-1power capacity - main spindel: 17 / 25.5 kWmax. Torque: 345 Nmspindle diameter in front bearing: 130 mmspindle bore: 67 mmchucking diameter: 325 mmspindle nose: A8 axis stroke:: x-axis: 750 mmy-axis: +/- 100 mmz-axis: 1200 mmfeeds:: rapid traverse: 40 / 40 / 40 m/minTailstock:: tailstock: 1200 mmtaper of center: Mk 5 tension force: max. 8 kNmilling head: b-axis: +/- 120 °tool taper: HSK A 63 tool piece magazine with: 60 spindle turning speed - stepless: 12000 U/minspindle motor: 10,5 kWmax. torque on the spindle: 90 Nmtotal power requirement: - kVAweight of the machine ca.: 9 tdimensions of the machine ca.: 4,6 x 2,5 x 2,82 mEquipped with:- Siemens 840D SlimLine / Celos CNC control- 3-jaw ch ...

Key data: 340 mm, 1170 mm

CNC turning/milling center Gildemeister CTX Beta 1250 4A with Sinumerik 840D Shopturn Year of Make: 2012 Program running hours: approx. 20,000h INTERLOCKING OPTION UNLOCKED Technical data: Main spindle speed: Drive power: 32 KW ISM 102 Speed of sub-spindle: Drive power: ISM 76 Y-axis carriage 1 Driven tools 1x12 on slide 1+2 Bar Feeder Package Workpiece pick-up gripper can be used on main and counter spindle Coolant system Chip conveyor Short Bar Loader IRCO MUK

travel -x axis: 900 mmtravel -y axis: 200 mmtravel -z axis: 800 mmB-axis swival range +/-: +90 / -20 °positioning accuracy: C: 9 control: SIEMENS number of spindle speeds: 0 - 6.000 CNC turning and milling center vertical | PITTLER - PV 315The machine is in very good condition.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: PV315 | PV-315The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 640 mm, 1500 mm

Turning/milling center GILDEMEISTER GMX 400 linear Year of Make: 2003 Control: Sinumerik Power line Technical data: Drive power main spindle ISM 90: 36/45 KW (100/40%) Main spindle speed: Torque main spindle: Bar Passage: 90mm Number of magazine slots: 120 pcs. Tool holder milling spindle: HSK 63 Drive power counter spindle ISM 90: 36/45KW (100/40%) Speed of sub-spindle: Torque sub-spindle: Bar Passage: 90mm B-axis / milling spindle: Drive power: Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed Driven Tools: Number of turret slots: 12 pcs. Tool holder: VDI 40 Accessories: - Chip conveyors - High-pressure system with 20bar - Preparation of 3D probes - Tailstock function counter spindle - Automatic sliding doors

chuck diameter: 500 mmswing diameter over bed slide: 700 mmcontrol: Siemens travel -x axis: 630 mmtravel -z axis: 500 mmCNC turning and milling center vertical | EMAG - VMC 450 MTThe machine is in very good condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 260 mm, 500 mm

Turning-milling centre Manufacturer: Mori Seiki Type NL1500SY/500 Year of construction 2007 In operation 03/2008 Control MSX-850-III Y and C axis All 12 turret stations are powered Max. turning length 500mm max. turning diameter 260mm Spindle Passage 50mm Speed of the driven tools 6,000 rpm Feeds X Z B 30,000 Y 10,000 with LNS rod loading magazine, length 1000mm, max D 65mm reducer sleeves. Machine is sold with all accessories, steel holders, AGWs (all still very good) collets, chuck, pick-up chuck, documentation, extraction system. Machine only ran in single-shift operation.

turning length: 4.500 mmgreates pass round over bed: 810 - 760 mmswing diameter over slide rest: 740 mmcontrol: SIEMENS - 840 C max. turning diameter: 800 mmturning diameter over slide: 740 mmtravel -x2 axis: 875 mmtravel -z2 axis: 5.200 mmCNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500equipped with a turret for driven tools as well as NC steady rest and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-40 | N 40 | N40MCT4500 | N40MCTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Turning and Milling Center Okuma Multus B300 II Control: OSP-P 300SA Year of manufacture: 2023 Travels: Turning length: 900 mm Turning diameter max. 630 mm X-axis 580 mm Y-axis 160 mm (+80/-80 mm) Z-axis 935 mm B-axis 225° (-30° / +195°; 0.001° steps) C-axis 360° Mount: HSK-A 63 Total tool stations: 40 locations Spindle speed: 50 – 5,000 rpm Accessories: - Chip conveyors - Tailstock design NC-controlled, MT5 - Touchsetter - High-pressure pump IKZ 40 bar - Renishaw touch probe prepared - 3-jaw chuck Kitagawa B212 Ø304 mm

turning diameter: 250 mmturning length: 555 mmcontrol: FANUC 18i-TB spindle turning speed range: 50-4500 + 5000 U/minturret head: 2x 24 12 angetriebenDimensions (L/W/H): 8000 x 2300 x 2400 mmweight of the machine ca.: 7.5 tY- & B- axesMisc. accessoriesmore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General Manufacturer: Spinner Type: TC800-110-MCY Year of Make: 2009 Control: Siemens 840D SolutionLine Travel: X 360 mm Z 900 mm Y -55/+65 mm Switch-on hours: 22,551 h Working spindle Speed: 3,200 rpm Power: 28/35 kW Torque: 175/875 Nm Tool/movement Tool holder: VDI40 Tool turret: 16-speed Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: C-axis for spindle incl. software option "Transmit" Hydraulic hollow clamping cylinder Electrical interface for connecting rod feeds 840D-SL Software Package "Turning with Shoturn" Tool monitoring 840D-SL 3D Simulation of the Precast Part Tailstock Chip conveyor High Pressure Pump Double filter Mahle Parts catcher V2 TC800 Clamping force control via differential pressure for main spindle

For sale is a Hyundai twin turret CNC lathe LM 1600 TTSY from 2023 with 1565 operating hours and 506 spindle hours., Features:, - High-performance, integrated spindle motor, - High productivity through simultaneous use of upper and lower turrets, - Robust BMT turret, - Multitasking is possible with the addition of a Y-axis to the upper turret (TTSY specifications)., - Integrated machining through synchronized control of main and counter spindles, - Design with hybrid guides: Combination of box guide (XY axis) and roller guide (Z axis), (Series LM1600/1800TT), Specifications:, - Max. turning diameter 230mm, - Max. turning length 705mm, - Main feed size 6 / Secondary feed size 6, - Drive type Built-in, - Spindle speed 6,000 rpm, - Spindle power 15/11 kW, - Spindle torque 208/140 Nm, - Travel distances (X1/X2/Z1/Z2/ZB/Y) 65/195/700/720/700/100 mm, - Rapid traverse (X1/X2/Z1/Z2/ZB/Y) 20/20/4 ...

Key data: 316 mm, 340 mm

CNC LATHE FOR GENERAL PURPOSE TURNING

For sale is a Hyundai twin-turret CNC lathe LM 1600 TTMS from 2023 with 1407 operating hours., and 343 spindle hours., Features:, - High-performance, integrated spindle motor, - High productivity through simultaneous use of upper and lower turrets, - Robust BMT turret, - Integrated machining through synchronized control of main and counter spindles, Specifications:, - Max. turning diameter 230mm, - Max. turning length 705mm, - Main feed size 6 / Secondary feed size 6, - Drive type Built-in, - Spindle speed 6,000 rpm, - Spindle power 15/11 kW, - Spindle torque 208/140 Nm, - Travel distances (X1/X2/Z1/Z2/ZB) 65/195/700/720/700 mm, - Rapid traverse (X1/X2/Z1/Z2/ZB) 20/20/40/40/40 m/min, - Lead type LM, - Number of tools: 2 x 12 pieces, - Tool size 20/32 mm, - Milling spindle speed 5,000 rpm, Subject to prior sale, changes and errors!

Control: Siemens Sinumeric 828 D Turning length: 1,600 mm Turning diameter: 900 mm X axis travel: 470 mm Z axis travel: 1,650 mm Speed: 3 – 1,500 rpm Tool turret: 12 places (all driven) Tool holder: BMT 85P Equipment: Self-centering bezel Conveyor Touchsetter 3-jaw chuck Programmable tailstock Aspirator Coolant pump 20bar with cyclone filter Oil mist extraction

turning diameter: 275 mmturning length: 900 mmcontrol: TRAUB TX8i Main- opposite spindle: spindle passage: 65 mmpower capacity at 100 % load: 25,20 kWpower capacity at 40 % load: 30,20 KWmax. torque at 40% / 100% load: 180 / 135 Nmspindle turning speed - stepless: 1 - 5.000 U/minspindle diameter in front bearing: 110 mmC-axis: 1 - 500 U/minworktool support: No. 1 x-axis: 290 mmy-axis: 165 mmz-axis: 600/950 mmB - axis: 360 °rapid traverse X/Y/Z: 18 / 18 / 30 m/minfeed capacity X/Y/Z: 10 / 10 / 7 kNnumber of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mmtoolpiece turning speed range: 8.000 / 2.000 U/minpower capacity at 25 % load: 5,80 kWmax. torque at 25% load: 4x18,6 / 4x74 Nmtool taper: TRAUB Ø60 worktool support: No.2 / No.3 / No.4 x-axis: 170 mmz-axis: 600/950 mmy-axis: +/- 60 mmrapid traverse X/Y/Z: 18 / 15 / 30 m/minfeed capacity X/Y/Z: 10 / 10 / 7 kNtool turret - number o ...