boring mills and machining centers used for sale (3,261)

A repair-required Hurco vertical 3-axis machining center is offered, including spindle through-coolant, 3D tool and a chip conveyor. Travels X/Y/Z: 1270mm/660mm/610mm, rapid traverse: 30m/min, feed rate: 15m/min, operating hours: approx. 47646h, max. spindle speed: 12000rpm, tool positions: 40, tool holder: HSK40, control system: Winmax. Bearing damage in the X-axis. A new spindle was installed in 2018. Inspection possible by appointment.

A Hurco CNC vertical machining center is available. Spindle power: 15kW, torque: 238Nm, travel X/Y/Z: 1060mm/510mm/610mm, table dimensions X/Y: 1020mm/610mm, tool holder: SK40, tool stations: 24, spindle speed: 10000rpm. Machine dimensions X/Y/Z: approx. 2800mm/3050mm/2800mm, weight: approx. 5900kg, control system: Ultimax. An on-site inspection is possible.

DECKEL MAHO DMU 160P duoBLOCK CNC Machining Center TECHNICAL FEATURES: Year: 2008 CNC Type: HEIDENHAIN TNC 530 Number of continuous axes: 5 X-axis stroke: 1600 [mm] Y-axis travel: 1250 [mm] Z-axis travel: 1000 [mm] X, Y and Z axis travel speed: 15000 [mm/min] Fast travel speed X, Y and Z: 60000 [mm/min] Table dimensions: Ø1500 x 1250 [mm] Maximum weight Tabletop Allowable: 4000 [Kg] Pin attachment: SK 40 (DIN 69871) Minimum speed. Spindle: 20 [rpm] Maximum speed Spindle: 12000 [rpm] Number of tool magazine stations: 60 Machine weight: 35000 [Kg] EQUIPMENT INCLUDED: x1 HEIDENHAIN workpiece probe x1 Laser Gauge x3 HEIDENHAIN measuring rulers on the X, Y and Z axes x1 Watering Center Spindle x1 Chip Conveyor x1 Paper Filtration Unit More information on request.

Key data: 762 mm, 508 mm, 508 mm

Inv. Num. : 9268 Type: VF-2SSYT Producer: HAAS Created: 2021 Parameters: Switch-on hours: 13517 h Operating hours: 6225 h Work table length: 914 mm Work table width: 457 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 508 mm Travel Z-axis: 508 mm Spindle power: 22.4 kW Cone: SK 40 Number of Stacking Positions: 31 pieces Machine weight: 3450 kg Equipment: Chip conveyor Renishaw tool probe Renishaw workpiece probe High-pressure tool cooling through the spindle center Extraction system from the machine cover

scm Busellato cnc machining center with console tables Cantilever center with front open beam Drilling unit with 19 tools for vertical and horizontal drilling and in the X direction of the sawing unit Rear and front stops on the consoles Safety system via bumper (without carpets and barriers) Linear tool changer with 11 places on the machine stand Linear tool changer with 14 places on the cantilever (boom) Processing field X Y Z 3115 x 1320 x 180 Throughput in Z 1880 mm JET ELITE P4/13 CE VERSION V 400/50 mobile control element with 7

Axles X 160 to infinity  Y to max 1300 mm Z up to max 60 mm 6-fold tool changer

The C400 has a robust machine stand, integrated control cabinet and 2200 sliding slides The tables are cast iron and have been finely milled and ground via cnc machining centers Planing width 400 mm Dressing table length 1800 mm Planing shaft 70 mm umd planing shaft 5700 rpm 3 Knife strip planer shaft max. thickness when planing 220 mm min. density 4 mm Carriage 2200 mm Milling machine D 30 mm rpm: 2000-3100-4400-7000 Engine V400/50 3 kw / hp Amplified motor possible 4 kw/ 5.5 hp (not necessary) Weight approx. 800 kg Machine with Hammer Austria

The C300 has a robust machine stand, integrated control cabinet and 2200 sliding slides The tables are cast iron and have been finely milled and ground via cnc machining centers The machine can be either 3 or 4 hp / 2.2 kw 3 kw S6 also 3 kw or 4 kw. Planing width 300 mm Dressing table length 1500 mm Planing shaft 70 mm umd planing shaft 5700 rpm 3 Knife strip planer shaft max. thickness when planing 220 mm min. density 4 mm Carriage 2200 mm Milling machine D 30 mm rpm: 2000-3100-4400-7000 Weight approx. 600 kg Machine with Hammer Austria

Planing width 520 mm Spiral shaft or Tersa Syncroon opening dressing tables Electric Table Lift Dickte with 2 speeds. Tischuhb Digital Display Thickened Machine of Exhibition

Grinding width 1350 mm CE VERSION V400/50 50-Hz Side viewing windows for the grinding units  LED Interior Lighting Vacuum table with 4 kW fan fan Infeed and outfeed roller table for long workpieces Tynex structuring unit at the outlet 5.5 kw Structuring brush K46 and pressure roller at the outlet Z-version for RRTC 135 - Pneumatic roller on/off on the calibration unit with steel roller - Pneumatic roller on/off on the fine grinding roller  - Pneumatic roller on/off on the TC combination unit - Electronic semented sanding shoe (56mm pitch) - Electronic

CNC Machining Center Kunzmann WF 650 Control: Heidenhain iTNC 640 Year of Make: 2015 Internal Machine No: 67 Travels: X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Rotary table C-axis: Ø 400 mm Swivel range A-axis: +120/-95° C-axis rotation range: 360° Mount: SK 40 DIN69871 Tool magazine: 40-fold Spindle speed: 1 – 12,000 rpm Spindle swivel range: +5 / -92° - Coolant system - IKZ - Electronic handwheel HR 510 FS - Chip auger

DMG MORI DMF 260 | 11Year of manuf. : 2022 Control : Siemens 840 DSL - Celos Speed : 20000 rpmMovement X/Y/Z : 2600/1100/900 mmTool holder : SK 40 ____________Description:In General:Year of manufacture:2022Control system:Siemens 840 Dsl - CelosTravel ranges X/Y/Z:2,600/1,100/900 mmSpindle speed:20,000 rpmTool holder:SK 40Spindle:Technology:Direct drive spindleSpeed:20,000 rpmMax. power:35 kWMax. torque:120 NmTool holder:SK 40NC swivel head:Technology:Swivel axis (B-axis)Travel range:+/- 100°Work table:Technology:Fixed table with integrated NC rotary tableTotal clamping area:3,200 x 1,100 mmTotal table load capacity:4,000 kg/mClamping area of NC rotary table:1,050 mmMax. table load capacity of NC rotary table:1,200 kg/mC-axis:360°Tool magazin:Technology:Chain magazineNumber of stations:120Tool changer:Double gripper with ATC shuttleMax. tool diameter:130 mmMax. tool length:300 mmE ...

Auerbach AX TBE 200.1Year of manuf. : 2013 ____________Description:In general:Drilling-ø (max.):3,5 mmDrilling depth (max.):200 mmDeep drilling module:Technology:DrillingspindleSpeed (max.):10.000 rpmPower:3,5 kWTaper:HSK-A40Equipment/Accessory:Chipmanagement:Chip trayCoolingmanagement:Internal cooling unit with Filter and High-pressure, 140 barWorkpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140Oilmistseparation:Electrostatic extraction, LTA AC 500Further Accessory:Misc. Single lip driller

YCM TV2110BYear of manuf. : 2012 Control : Fanuc MXP-200FP - ManualGuide Speed : 6000 rpmMovement X/Y/Z : 2100/1020/762 mmTool holder : SK 50 ____________Description:In General:Year of manufacture:2012Control system:Fanuc MXP-200FP ManualGuideTraverse paths X/Y/Z:2,100/1020/762 mmSpindle speed:6,000 rpmTool holder:SK 50Clamping surface:2,300 x 1020 mmSpindle:Technology:Geared spindleSpeed:6,000 rpmMax. power:approx. 22 kWMax. torque:approx. 550 NmTool holder:SK 50Work table:Clamping surface:2,300 x 1020 mmMax. table load:3,000 kgT-slots:6x 22 mm, spacing 150 mmTool magazin:Technology:Chain magazineTool changer:Double gripperNumber of stations:40 piecesTool diameter max.:120/240 mmTool length max.:350 mmEquipment:Chip disposal: Chip conveyorCoolant supply:IKZ pump with filterEmulsion mist extraction:MechanicalSet-up mode:Electronic handwheelAccessories:2x magnetic clamping plate 800 ...

Icon 6-250Year of manuf. : 2011 Control : Fanuc 30i ____________Description:In General:Year of manufacture:2011Control system:Fanuc 30iMaximum table load:100 kgTravel range X/Y/Z:300/300/370 mmInstallation weight:approx. 33,000 kgMachining station I (X/Y/Z/B):Technology:1 x vertical spindleSpeed:8,000 rpmTool holder:HSK-A 63Power:31 kWTorque:197 NmTool changer:12 stationsB-axis:0.001°, pneumatic indexing, clamping forceTool diameter/length:125/250 mmMachining station II (X/Y/Z/B):Technology:1 x vertical spindle + 1 x horizontal spindleSpeed:8,000 rpmTool holder:HSK-A 63Power:31 kWTorque:197 NmTool changer:12 stationsB-axis:0.001°, pneumatic indexing, clamping forceTool diameter/length:125/250 mmMachining station III (X/Y/Z/B):Technology:1 x vertical spindleSpeed:8,000 rpmTool holder:HSK-A 63Power:31 kWTorque:197 NmTool changer:12 stationsB-axis:0.001°, pneumatic indexing, clampi ...

Soraluce SLP-6000Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpmMovement X/Y/Z : 4500/1800/1300 mm____________Description:In General:Year of manufacture:2017Control system:Heidenhain TNC 640Travel range X/Y/Z:4,500/1,800/1,300 mmSpindle speed:5,000 rpmTool holder:SK 50Milling head (spindle):Technology:Diagonal head with gear spindleIndex:0.001°Speed:5,000 rpmTool holder:SK 50Max. power:43 kWMax. torque:1,045 NmCoolant supply:Coolant + blast airWorking table:Clamping surface:6,000 x 1,100 mmT-slots:6 x 22H12, spacing 140 mmTool magazin:Technology:Chain magazineNumber of stations:40Tool changer:Double gripper (horizontal/vertical)Max. tool diameter:125 (250) mmMax. tool length:400 mmEquipment:Position measurement systems:Direct scalesChip removal:Chip conveyorCoolant supply:Internal coolant system with filter, 20 barWorkpiece measurement:Funk M&H probeSet-up oper ...

Witzig & Frank TriFlex 5XYear of manuf. : 2018 Control : Fanuc 30i-B ____________Description:In General:Year of construction:2018Control system:FanucProcessing stations:5 piecesLoading station:1 pieceTravelling range:X-axis:450 mmY-axis:500 mmZ-axis:450 mmRapid traverse X/Y/Z:50 m/minTurret:Number of stations:8Speed:13,300 rpmTorque:58 NmTool holder:HSK 63 CWorkpiece/device:Dimensions max.:350 x 350 x 350 mmMax. permissible mass:250 kgMedia supply line:6 piecesNC swivelling rotary table:A-axis:+/- 150°B-axis:360°Max. load:250 kgTable diameter:320 mmEquipment:Loading/unloading:Fanuc Robot M20i-AChip removal:2x chip conveyorsCoolant supply:IKZ system, 20 barPosition measuring systems:Direct in all axes

horizontal machining center, year 2022, CNC Fanuc F31iB con Celos. Used machine in good condition. More info & price on IndustrialBuyer.

A CNC vertical moving-column machining center Mazak in need of repair is available. Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y: 1460mm/510mm, max. table load: 800kg, spindle speed: 12000rpm, tool holder: SK40, tool stations: 30, rapid traverse: 36m/min. Machine dimensions X/Y/Z: approx. 3300mm/2900mm/2800mm, weight: approx. 7500kg, control: Mazatrol 640 M. The spindle does not always decelerate properly. Documentation available. An on-site inspection is possible.

A Mikron CNC vertical machining center is available. Travel X/Y/Z: 900mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: approx. 500kg, tool holder: SK40, speed: 5000rpm, rapid traverse: 10m/min, feed: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 5000kg, control: Mikron, operating hours: approx. 35580h. The main control board of the machine has a defect. Including approx. 100 SK40 tool holders and tools. An on-site inspection is possible.

Key data: 730 mm, 450 mm, 470 mm

Mazak CV5-500 CNC 5-Axis Vertical Machining Center CNC control Mazatrol Smooth X Table size Ø 500 mm Table load 200 kg Number of pallets 1x Maximum 500x320 mm workpiece X-axis travel 730 mm Y-axis travel 450 mm Travel Z-axis 470 mm C-axis (table rotation) 360° B-axis movement ±110 (220) ° Spindle speed: 18,000 rpm Spindle holder HSK A-63 Spindle motor 15/11 kW Magazine capacity 48 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Control Fanuc OM Travel distances X/Y/Z: 450 x 300 x 400 mm Table size 600 x 300 mm Spindle speed 8,000 min-1 Tool magazine for 16 Wkzg. SK 30

bore capacity in steel (diameter): / mmthroat: / mmbore stroke: / mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 28 mmarm length: 700 mmworkpiece height max.: 1300 mmtool taper: MK3 feeds: 0,1-0,3 mm/Uspindle turning speed range: 100-1.220 U/mintotal power requirement: 1,4 kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: LBH 1,8 x 0,8 x 2,3 mIncl. cube tableIncl. drilling feedMechanical clampingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

taper MK: 3 feed:: 4 Stufen : 2580 x-travel: 2500 mmthroat: 1000 mm: 1000/2800 mm weight: 3,7 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 880 mmy-travel: 630 mmz-travel: 630 mmtotal power requirement: kWweight of the machine ca.: 8800 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 mm, 800 mm, 600 mm

Inv. Num. : 9265 Type: MCV 1210 Producer: TAJMAC-ZPS Created: 2014 Parameters: Control system: Heidenhain iTNC 530 Switch-on hours: 22746 h Operating hours: 21850 h Work table length: 1200 mm Work table width: 1000 mm Maximum table load (uniform): 3000 kg Number of stacking positions: 30 Maximum spindle speed: 15000 1/min X-axis travel: 1000 mm Y-axis travel: 800 mm Z-axis travel: 600 mm Cone: SK 40 Machine weight: 11500 kg Equipment: Technical documentation Chip conveyor Blum Mini NT F800 Tool Probe Renishaw Radio Receiver High Pressure Cooling ChipBlaster D30-70

vertical machining center, year 2021, 3860 operating hours, CNC Sinumerik 828D. Used machine in good condition. More info & price on IndustrialBuyer.

vertical machining center, year 2016, 13000 operating hours, CNC SINUMERIK 840D. Used machine in good condition. More info & price on IndustrialBuyer.

Machine reamers, reamer, reaming tool, locating knife cutting set -Manufacturer: Loewe / FW, Adjustable machine reamers, 11 pieces -Diameter: Ø 35 to 65 mm -Recording: MK3/MK4 -Submission/Price: complete -Transport dimensions: 520/400/H80 mm -Weight: 27 kg