used CNC Turning Machines for sale

turning length: 2010 mmcontrol: Siemens 840Dturning diameter over slide rest: 320 mmspindle passage: 100 mmTool changer: turning speeds: 10-2800 U/mintransmission ratio: 4 chip conveyor: steady: 240 mmtail stock: 3-jaw-chuck diameter: 400 mmmain gear-box motor: 55 kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 280 mmturning length: 800 mmcontrol: Siemens type: 840 D c-axis: live tooling: Tool changer: turning speeds: 4000 U/minswing diameter: 320 mm3 jaw chuck Forckrath: 250 mmtail stock: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter 620 mm turning length 1500 mm control Siemens 808D spindle bore 100 mm turning diameter over slide 420 mm spindle turning speed range 10 - 4000 U/min main drive 41 kW rapid traverse speed 10000 mm/min total power requirement 65 kW weight of the machine ca. 9 t dimensions of the machine ca. 6,4 x 3,0 x 2,5 m Control unit CNC Siemens 808D new Drives/Servomotores, 24 month warranty on equipment - Chip Conveyor - Tool cooling system - Tailstock - Tool changer (Tower) with 8 positions OPTIONAL INCLUDED - - piece support (Lunete) The machine is completely upgraded

max. turning diameter: 380 mmchucking diameter: 200 mmturning length: max. 600 mmcontrol: 32i-B FanucMain spindle:: Max. rpm: 4.000 min/-1power capacity - main spindel: 15 / 18,5 kWspindle passage: 65 mmmax. Torque: 215 / 352 Nmspindle nose: ISO 702/1 (140) C-Axis: 0,001 °Turret 1:: number of toolpositions: 14 pos.number of driven tools: 7 mmShank diameter: 30 x 55 mmtool taper: VDI 30 x-axis: 220 (+60 / +280) mmy-axis: 150 (+/-75) mmz-axis: 600 mmrapid traverse ( X / Y / Z ): 30 / 45 / 30 m/minFeed force: 10 / 9,4 / 10 kNmax. spindle speed driven tools: 6.000 U/min.power capacity - driven tools: 4,2 kWmax. Torque: 16 NmTurret 2:: number of toolpositions: 10 pos.Shank diameter: 30 x 55 mmtool taper: 7x VDI 30 / 3x UniFlex-52 x-axis: 110 (+85 / -25) mmz-axis: 650 mmrapid feed (X / Z): 30 / 20 m/minFeed force: 10 / 24 kNtotal power requirement: 49 kVAweight of the machine ca.: 5,5 tdim ...

turning diameter: 65 mmturning length: 150 mmcontrol: Fanuc 32i-B Number of working hours: 11028 hchuck diameter: 250 mmturning speeds: 4000 U/minturret (x-stations): 14 VDI 30Number of axles: 3 (X-Y-Z) St.turret (x-stations): 7 VDI 30Number of axles: 2 (X-Z) St.c-axis: 0,001 °y-Axis min./max.: +/-75 mmchip conveyor: Knoll 400 S-1/335 Bj. 2013total power requirement: 18,5 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: 4,7 x 1,72 x 2,16 mdriven tools: 7 Handling system: FMB Unirobot M-10iA 12-7P Bj. 2017CNC universal lathe INDEX IT600, year of manufacture 2014- The following accessories would be supplied:o 2-jaw chuck Schunk ROTA 2B 200o approx. 40 sets of clamping jawso Approx. 45 tool holders (1x driven), but without cutting tool holder/cutting toolo Compact handling system FMB unirobot M-10iA-12-7Po 12x 7 pallets each for various blanks- The buyer should preferably b ...

Control: Fanuc 32i Rotary memeser 380 mm Main spindle D=65mm Speed 4000 rpm Holding brake C-axis Tool carrier 1 X/ Z axis 220/ 600 mm working distance Tool carrier 1: 14 shots (VDI 30)/ 7 attached Tools Tool carrier 2 X/Z axis 110/650 mm working distance Tool carrier 2: 7 shots (VDI 30) + 3 UniFlex -52 Tool measurement ATC Chip-federals

FANUC Control 32iB max. swivel Ø 380 mm max. turning length 600 mm Spindle passage 65 mm Chuck diameter 250 mm Spindle speed 4,000 rpm REVOLVER 1 Travel: X= 220 (+60/+280), Y= 150 (+/- 75), Z= 600 mm Stations 14, powered 7 Speed driven stations 6,000 1/min MULTIFUNTIONsREVOLVER Travel X= 110 (+85/-25), Z= 650 mm Stations 10, including 7 fixed places (VDI 30) 3x UniFlex superimposed tools Tailstock Handling system FMB unirobot M-10iA-12-7P, year 2017

automatic workpiece loader - max bar length: 720 mm - max dia: 80 mm Previously used on Mazak Multiplex 620

JANUS HTC2050 CNC lathe was built in Poland in 2010. The machine, characterised by high stability and operational reliability, uses the necessary equipment for high-speed and finishing machining, allowing for precise machining of internal holes, columns, cones, arches and all types of screw threads. The machine uses a high-speed spindle with infinitely variable rotation speed from 40 to 4000 rpm and a bed inclined by 45°, which facilitates chip removal and increases the cutting force transmitted by the horizontal bed and its head. Rear and front spindle angular contact bearings simultaneously transfer radial and axial loads, ensuring low spindle temperature rise and less thermal deformation during high-speed finishing. The JANUS lathe equipment includes a state-of-the-art FANUC Series 0i Mate-TC CNC controller, a chip conveyor and the tools shown in the photos. The total weight of th ...

Jesco Jaguar Ø 840 x 4100 mm CNCSwing over bed: 840 mm Swing over cross-slide: 560 mm Distance centre tot centre: 4100 mm Dia of spindle bore: 105 mm Command: Fagor 8060FL Length: 6500 mm Width: 2100 mm Height: 2000 mm Toolchanger: yes Number of tools: 8 positions

Jessey Jaguar 2080 Ø 510 x 2000 mm CNCSwing over bed: 510 mm Swing over cross-slide: 340 mm Distance centre tot centre: 2000 mm Spindle cone: A2-8 Dia of spindle bore: 80 mm Power on the spindle: 11 kW Number of speeds: 12 > 1800 rpm Command: Fagor Length: 4060 mm Width: 1420 mm Height: 1600 mm Weight: 4 ton

Ref. -No.: 10036Manufacturer: JOHNFORDYear of construction: 2009Type of control: CNCControl: Fanuc Series 18i-TBStorage location: HalberstadtCountry of origin: TaiwanMachine length: 9800 mmMachine width: 3695 mmMachine Height: 5292 mmWeight Of The Machine Ca.: 32,6 tamount of positions: 12 Bar passage: 165 mmSerial no.: TDF9007 Turning Length: 2000 mmTurning Diameter Over Bed: 1550 mmSwing Diameter Over Bed Slide: 1270 mmLongitudinal Travel (Z-Axis): 2000 mmSpindle Head: A2-15 Spindle Diameter In Front Bearing: 240 mmSpindle Bore: 185 mmSpindle power: 37/30 kWCross Travel: 685 mmSpindle Speeds: 1000 RPMRapid Travel Speed X-Axis: 10 m / minRapid Travel Speed Z-Axis: 12 m / minTool changer: 12 Pcs

Control: HEIDENHAIN Manual Plus max. turning diameter over bed: 340mm max. turning diameter over slide: 150mm max. turning length turning length: approx. 580mm Wheelbase: 750mm Spindle bore: 52mm max. main spindle speed: 1 - 4,000 rpm Main spindle DIN 55027 Bayonet: Wedge bar chuck FN RHU-200 Collet by hand: F48 8-fold SAUTER tool turret Tool holder: VDI-16 Tailstock with quill diameter: 60mm Travel: 140 mm Tool cone: Mk 4 Space requirement L x W x H: approx. 2.50 x 1.60 x 1.70 meters Dimensions control cabinet L x W x H: approx. 1.25 x 0.5 x 1.7 meters Machine weight: approx. 2'400kg Note: This machine is not located in Schijndel, but in Eersel.

Working Area Workpiece length (max.) 78 in Turning-D over bed (max.) 26 in Turning-D over support 18 in Turning length (max.) 68 in Travels Travel X-axis 13.8 in Travel Z-axis 75 in Headstock Speed range 60 – 2,000 rpm Spindle mount A2-8 Lathe chuck diameter 12 in Spindle capacity with draw tube 3 in Rapid Feed Rapid feed X-axis 236.22 in/min Rapid feed Z-axis 314.96 in/min Tool Head Number of tool stations 8 positions Accuracies Positioning accuracy X-axis ± 0.0005 in Positioning accuracy Z-axis ± 0.0006 in Repeatability X-axis ± 0,005 in Repeatability Z-axis ± 0,008 in Tailstock Tailstock taper MT 5 Tailstock quill diameter 3 in Tailstock quill stroke 6 in Drive Capacity Motor rating main drive 24.8 Hp Main drive, continuous load 20.11 Hp Torque of drive X 7 ft.lb. Torque of drive Z 11 ft ...

KNUTH PICO TURN CNC lathe built in 2015 in Germany is the ideal choice for small-scale industries focused on unit and small batch production. Due to its extensive machining capabilities, sturdy design and high productivity, this compact size machine performs excellently in, among others, precision arc turning, threading and longitudinal and transverse workpiece turning. All operations are performed by a powerful spindle with variable speed adjustment between 150 and 1750 rpm. The KNUTH PICO TURN CNC lathe is additionally equipped with, among others, an automatic 4-position tool changer, an intuitive SIEMENS SINUMERIK 808D CNC controller and a 3-jaw chuck with a diameter of 125 mm. The total weight of the machine is 400 kg. Technical specifications of the KNUTH PICO TURN mini metal lathe machine - feed rates in the X/Z axis: 500/250 mm - rapid traverse in the X/Z axis: 2000/1000 mm/m ...

Control Heidenhain ... Manual Plus M Turning diameter... 500mm Rotation length ... 1500mm Spindle bore ... 83mm Turret Spindle speed ... 0-3000 rpm. Machine weight ... 3200kg L x W x H ... 2538x3238x1920mm Main engine power ... 17kW workpiece weight ... 1000kg The machine is in good condition, possible to test under power.

Inv. Num. : 7115 Type: LP 100 CNC Producer: Laschet Partner Created: 1999 Parameters: Control System: FANUC Series 0-T Maximum travel length in the X-axis: 300 mm Maximum feed rate in the Z-axis: 280 mm Spindle bore: 300 mm Length: 2800 mm Width: 1450 mm Height: 2000 mm Weight: 3200 kg Equipment: MRW Robopot Feeder

Inv. Num. : 7112 Type: LP 130 CNC ES Producer: Laschet Partner Created: 1997 Parameters: Control system: SIEMENS SINUMERIK Maximum travel length in the X-axis: 300 mm Max. travel length of the Z-axis: 280 mm Maximum main spindle power: 25 kW Maximum spindle speed: 5700 1/min Spindle bore: 80 mm Length: 2800 mm Width: 1450 mm Height: 2000 mm Weight: 4200 kg Equipment: Spares Bar feeder Complete set of collets

Machine Details Stock-No. 1105-03996 Type of machine CNC Lathe - Inclined Bed Type Make LEADWELL Type F 1 Year of manufacture 2016 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time by appointment Freight basis EX WORK Price Technical details turning diameter 440 mm turning length 420 mm control FANUC O I TC Travel -X Axis 140 mm Spindle Bore: 62 mm Number of Turrets: 1 piece No. of tools in turret 1 12 pieces power capacity 11 kW spindle nose A2-5 feed range 1 - 15000 mm/min Rapid traverse 30 m/min Additional information CNC FANUC OI TB 2 AXIS WITH CHUCK AND TAILSTOCK

Article number: 04-02-099 Manufacturer: Leadwell Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: 1991 L x W x H: approx. 2500x1420x1740 Weight: approx. 3000kg Max. turning diameter: approx. Ø375mm X-axis travel: approx. 115mm Z-axis travel: approx. 350mm Spindle bore: approx. 40mm Tool turret: 12 stations Speed: approx. 45-4500 rpm Tailstock: MK3 Control: Fanuc O-T Accessories  Collet device  3 jaw chucks  Various holders  Various tools  Machine feet  Tool Measurement System Other accessories on request Price and other technical data on request

Stock-No. 1105-03841 Type of machine CNC Lathe - Inclined Bed Type Make LEADWELL Type LTC 20 Year of manufacture 1990 Type of control CNC Storage location HAGUENAU FRANCE Country of origin taiwan Delivery time by appointment Freight basis EX WORK Price Technical details turning diameter 300 mm turning length 600 mm control Fanuc O- T Travel -X Axis 175 mm Spindle Bore: Ø 50 mm Number of Turrets: 1 piece No. of tools in turret 1 12 pieces power capacity 11/15 kW spindle nose A2-6 tailstock quill taper MT 4 feed range 1 - 15000 mm/min Rapid Traverse 12 / 15 m/min total power requirement 30 kW Additional information CNC FANUC OT turret 12 tols TAILSTOCK CHUCK Chip Convoyer

Machine Details Warehouse number 1105-03576 Machine type CNC lathe - inclined bed machine LeadWELL brand Type T 6 L Year of construction 2011 Control type CNC Control FANUC O ITB Storage location HAGUENAU Country of origin Japan Delivery time by appointment Freight base EX WORK Technical details Turning diameter 210 mm Turning length 400 mm Control FANUC OI TC Travel - x 125 mm Travel - z1 460 mm Rod passage: 50 mm Number of revolvers: 1 piece Number of tools in revolver 1 12 pieces Speed range main spindle: 5000 rpm Drive power 7.5 kW Spindle nose A2-5 Feed range 1 - 15000 mm/min Rapid traverses 25 m/min Information CNC CONTROL FANUC OI TC 12 COMPARTMENT TURRET CHUCK + TAILSTOCK+ SWARF CONVOYER

automatic workpiece loader

min/max diameter: 6 gt; 120 mm min bar stock length: 130 mm max bar stock length: 1600 mm max bar stock weight: 67 kg pushing force: 167 Nm loading cycle for bar stock: 8 gt; 12 sec loading cycle for shaft loading: 4 gt; 7 secLength: 2048 mm Width: 1486 mm Height: 1400 mm Weight: 600 kg

Description: Siemens Sinumerik 840 D control Technical data Swing diameter over bed track cover 280 mm Swing diameter over cross slide guide 280 mm Turning diameter 280 mm Toboggan trails Top left X2 axis 220 mm Top left Z2 axle 835 mm Bottom right X3 axis 220 mm Bottom right Z3 axis 850 mm Tailstock Z1 axis 795 mm Distance from spindle flange to tailstock reference point 995 mm Turning length max. depending on clamping device 800 mm Chuck diameter, max. 250 mm Spindle bore 90 mm Spindle diameter in the front bearing 130 mm Dimensions of the machine Length with chip conveyor approx. 6453 mm Width with control panel and control cabinet approx. 3400 mm Height approx. 2346 mm Weight 11 tons. Incl. hydraulic steady rest mounted on the upper tool turret Optionally, a bezel can also be built on the lower slide.weight approx.: 11,000 kg, Approx. Onsite Dimension. (l x w x h): 6,500 x 3,400 x 2, ...

Inv. Num. : 4619 Type: GR 300C Producer: MAHO Graciano Generated: 1990-1993 Parameters: Control system: CNC 432 Philips Maximum turning length (travel in the Z axis): 620 mm Maximum turning diameter over bed: 370 mm Maximum turning diameter over support: 320 mm Maximum travel length in the X-axis: 250 mm Minimum main spindle speed: 1000 rpm Maximum main spindle speed: 5000 rpm Number of turret heads: 12 pieces Equipment: Tailstock

turning diameter: 500 mmturning length: 1100 mmcontrol: Pfillips 432turning diameter over slide rest: 420 mmspindle turning speed range: 3000 U/minspindle passage: 82 mmTool changer: 12 tool taper: VDI 40 total power requirement: kWweight of the machine ca.: 5,7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe Mantegazza 315

MANURHIN KMX SWING 720 CNC lathe was built in 2004 in France. The automatic lathe is used for precision machining of workpieces with a maximum length of 2500 mm and a diameter of 20 mm, in ten axes. The high quality of the workmanship, high turning precision and reliability of the turning centre, will satisfy even the most demanding customers. The KMX SWING 720 swiss type lathe guarantees the possibility of performing a wide range of metal machining, thanks to the use of a main spindle together with a sub spindle rotating at a maximum speed of 10000 rpm. The machining tools are stored in a magazine with a capacity of up to 14 pieces and they are changed in a very short time. The lathe is equipped with a Fanuc Series 160i-T CNC controller for full control of the machine and a Hydrobar Express 226 LNS bar feeder. The total weight of the machine is 4300 kg. Technical parameters of  ...

- Accessories available. - Parat holder. Workspace Swing diameter over bed 320 mm Swing diameter over carriage 150 mm Distance between centers 800 mm Working spindle Spindle holder according to DIN 55027 B6 Spindle bore 50 mm Spindle taper metric 60 Main drive Motor power at speed 1500 min-1 7 kW Spindle speed range 1st stage 0 - 1000 mm-1 Speed range of the spindle 2nd stage 20 - 4000 mm-1 Max. spindle torque 1.Stage 360 Nm 2nd stage 90 Nm Axis X Max. travel 190 mm Rapid traverse 5000 mm.min-1 Max. feed force 3000 N Axis Z Max. travel of the bed carriage 750 mm Rapid traverse 8000 mm.min-1 Max. feed force 5000 N Quick-change bracket MULTIFIX B Max. steel diameter 25 x 25 mm Tailstock Diameter of the quill 65 mm Adjustment of the quill 120 mm Inner cone of the quill – Morse 4 Dimensions of the machine Length 2180 mm Width 1341 mm Height 1 ...

Inv. Num. : 7213 Type: MASTURN 50 CNC Producer: MAS Created: 2001 Parameters: Control system: Siemens SINUMERIK 810 D. Max. turning length: 1500 mm Max. turning diameter: 500 mm Maximum workpiece weight: 350 kg Weight: 2500 kg Equipment: Conveyor Tailstock Cutter head

Inv. Num. : 6670 Type: MASTURN MT 54 Producer: MAS Created: 2003 Parameters: Control system: Heidenhaim TE 4110 MP Max. turning length: 800 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter over support: 310 mm Maximum spindle speed: 3000 1/min Tool head: Duplomatic VDi30 Spindle bore: 80 mm Spindle taper: MORSE 5 Number of tool head positions: 8 Length: 3300 mm Width: 2500 mm Height: 1700 mm Weight: 2600 kg Equipment: Technical Documentation Tool holder Bake

Inv. Num. : 7059 Type: MT 40/1500 Producer: MAS Created: 1996 Parameters: Control system: FAGOR Max. turning length: 1500 mm Maximum turning diameter over bed: 540 mm Maximum turning diameter over support: 305 mm Spindle speeds: 3000 1/min Spindle bore: 85 mm Weight: 2970 kg Equipment: Rotating cutter head Additional dovetails behind the cutter head for additional equipment

Inv. Num. : 7031 Type: MT 550i Producer: Masturn Created: 2016 Parameters: Control system: HEIDENHAIN Switch-on hours: 757 h Operating hours: 329 h Max. turning length: 800 mm Maximum turning diameter over bed: 550 mm Maximum turning diameter over support: 350 mm Maximum travel length in the X-axis: 285 mm Maximum feed rate in the Z-axis: 890 mm Spindle speeds: 3000 1/min Spindle clearance: 82 mm Length: 2538 mm Width: 1920 mm Height: 1755 mm Weight: 3200 kg Equipment: Duplomatic turret

Description: Fagor digital display Turning diameter over bed: 500 mm Turning diameter over support: 300 mm Spindle bore: 72 mm Turning diameter in the offset: 700 mm Spindle speeds - infinitely variable: 20 - 2000 rpm Metric threads: 0.5 - 120 Thread - module: 0.125 - 30 mm Thread - inch: inch. Whitworth thread: 0.25 - 60 TPI Bed width: 400 mm Spindle cone: Size 8 Number of feeds: 120 mm/rev Longitudinal feeds:: 0.04 - 12 mm/rev Cross feeds: 0.02 - 6 mm Thread: 64 steps Slide path: 315 mm Top slide adjustment: 130 kW Quill diameter: 75 mm Quill taper: MTS Quill stroke: 230 mm Total power requirement: 11 kW Drehlänge: 1,000 mm, weight approx.: 2,650 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,300 x 1,500 mm

turning diameter: 850 mmturning length: 1500 mmcontrol: Siemens 840Dcentre distance: 1500 mmcentre height: 450 mmturning dia. over face-slide: 690 mmspindle diameter: 200 mmspindle passage: 128 mmpower capacity: 65 kWturning speeds: 7-1950 U/minTorque: 7908 Nmrapid traverse: 10 m/minx-travel: 510 mmz-travel: 1480 mmTool changer: ja workpiece weight: 800 kgtotal power requirement: 110 kWweight of the machine ca.: 17,5 tdimensions of the machine ca.: 11 x 4,2 x 3,3 mCNC turning and milling centerMax Müller MDW 20 MC axisDriven toolsTool changerTool magazineAutomatic sliding door on the leftOil mist extractionBelt filter systemThe machine is technically and optically in very good condition.A viewing and demonstration is possible by appointment.The technical Data is manufacturer or operator information and therefore for usnot binding. We reserve the right to make an interim sale, it applyex ...

turning diameter: 850 mmturning length: 1500 mmcontrol: Siemens 840ccentre distance: 1500 mmcentre height: 450 mmturning dia. over face-slide: 690 mmspindle diameter: 200 mmspindle passage: 128 mmpower capacity: 65 kWturning speeds: 7,1-18000 U/minTorque: 5783 Nmrapid traverse: 10 m/minx-travel: 510 mmz-travel: 1480 mmTool changer: workpiece weight: 800 kgtotal power requirement: kWweight of the machine ca.: 17,5 tdimensions of the machine ca.: 6x2,4x3,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mmturning length: 600 mmcontrol: swing diameter: 600 mmspindle bore: 73 mmchip conveyor: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10364Manufacturer: MAZAKYear of construction: 1997Type of control: CNCControl: MAZATROL T PLUSStorage location: HalberstadtCountry of origin: JapanMachine length: 6365 mmMachine width: 3180 mmMachine Height: 2800 mmWeight Of The Machine Ca.: 7 tBar passage: 64 mmMax rotation diameter: 510 mmTurning Diameter: 400 mmTurning Length: 1539 mmSpindle power: 22-26 kWSpindle Speed Min.: 35 RPMSpindle Speed Max.: 3500 RPMRapid Travel Speed X-Axis: 12 m / minRapid Travel Speed Y-Axis: 10 m / minRapid Travel Speed Z-Axis: 18 m / minMotor power milling spindle: 7,5 kWMax. speed milling head: 15-6000 RPMX-axis travel: 450 mmY-axis travel: +/- 90 mmZ-axis travel: 1539 mmNumber of tools in the chain magazine: 40 (15 + 25) POS Further information:The main spindle was replaced with a new one in Oktober 2019. In the course of this, small spare parts were renewed or reworked.

Inv. Num. : 7470 Type: INTEGREX 35 Producer: MAZAK Created: 1998 Parameters: Control System: Mazatrol T Plus Hours: 8305 h Maximum turning length: 720 mm Maximum turning diameter over bed: 315 mm Maximum travel length in the X-axis: 450 mm Maximum travel length in the Y-axis: 180 mm Maximum feed rate in the Z-axis: 1065 mm Minimum main spindle speed: 35 1/min Maximum spindle speed: 3300 1/min Number of axle: 4 Power consumption: 50 kW Tool magazine: 80 pieces Rapid traverse X/Y/Z: 12000/11547/18000 mm/min Length: 4500 mm Width: 3200 mm Height: 2600 mm Weight: 6500 kg Equipment: chuck TOS Svitavy UIS 315/6-1-M1

turning diameter: 510 mmturning length: 1000 mmcontrol: Mazatrol type: Mazatrol T plusturning speeds: 35-3500 U/minspindle passage: 88 mmTool changer: 20 Pos.Spindle capacity: 35 KWcentre distance: 1029 mmx-travel: 450 mmz-travel: 1029 mmtotal power requirement: kWweight of the machine ca.: 7,5 torbital diameter : 510 mm- Standard machining diameter : 510 mm- Max. machining length : 1000 mm- Spindle power : 35/30 HP- Spindle Bore: 88mm- Spindle nose : A2-8- Spindle speed range: 35 - 3500 rpm- Distance between centers : 1029 mm- Axis C- X axis travel : 450 mm- Y axis Travet : +/- 90 mm- Z axis travel : 1029 mm- max feed : X = 12 m/min - Y = 10 m/min - Z = 18 m/min- Tool charger : 20 positionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe MULTIPLEX 6200-II Manufacturer: Mazak Year: 2015 Control Mazatrol ... MATRIX 2 Turning diameter ... 320mm Rotation length... 180mm Counter spindle Spindle bore ... 51mm Machine weight... 7900kg L x W x H ... 3570x1795x2090mm Circumferential diameter above bed ... 320mm Spindle speed ... 1-5000rpm The machine is in good condition, possible to test under electricity.

1 pc CNC lathe MAZAK QT 200 MS Year of construction: 2020 Mazatrol Smooth G Max. turning diameter 380 mm Max. swing diameter 695 mm Distance between clamping jaws 575 mm Max. rod passage 65 mm Travel X/Z/W 234/625/585 mm Main spindle 26/22 kW Main spindle Max. speed 5,000 rpm Main spindle spindle nose A2-6 Counter spindle 11/7.5 kW Counter spindle Max. speed 6,000 rpm Counter spindle spindle nose A2-5 12-fold tool turret, 12 driven tool stations, 5.5 kW Max. speed: 5,000 rpm Overload monitoring Additional coolant nozzle main spindle 15 bar high-pressure pump Preparation for oil mist extraction Robot Interface (Advance/Profibus) Drilling cycle with torque-dependent clamping fracture Chip conveyor with low discharge height Hollow clamping cylinder counter spindle Hainbuch collet chuck clamping top Nova Axfix mini size 52 main spindle Hainbuch collet chuck clampin ...

Machine Details Stock number 1105-03735 Machine type CNC lathe Brand MAZAK Type QT 20 N Year of construction 1995 Control type CNC Control Mazatrol T PLUS Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from site Technical details Turning diameter 440 mm Turning length 451 mm Control Mazatrol T PLUS Turning diameter via bed carriage 300 Tailstock holder MK 4 Quill stroke 130 mm Tailstock displacement 500 mm x-axis 180 mm z-axis 510 mm Spindle bore 62 mm Speed range 12-4500 rpm Total power requirement 40 KVA Machine weight ca. 4,2 t Information WITH MAZATROL T PLUS Good Macschine All prices plus VAT. VAT.. Changes and errors in the technical details and information reserved.

Machine Details Stock-No. 1105-03886 Type of machine CNC Lathe Make MAZAK Type QT 20 N Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time short-term Freight basis ex works Price Technical details turning diameter 440 mm turning length 451 mm control Mazatrol T PLUS turning diameter over bed slide 300 tailstock taper MT 4 Quill Stroke 130 mm tailstock adjustment 500 mm X-AXIS 180 mm Z-AXIS 510 mm Spindle Bore 62 mm turning speed range 12-4500 rpm total power requirement 40 KVA Weight of the machine approx. 4.2 t Additional information NICE MACHINE WITH BAR FEEDER IEMCA SERCI III

turning diameter: 350 mmturning length: 532 mmcontrol: Mazatrol Smart total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMazatrol Smart CNC control3-jaw chuckC-axisdriven tools12-fold revolverTool Eyetail stockcoolant devicechip conveyorTechnische Daten / technical details:max. Umlaufdurchmesser / max. swing diameter 660 mmmax. Drehdurchmesser/ max. turning diameter 350 mmmax. Drehlänge / max. turning length 532 mmPlanweg (x) / cross way (x) 225 mmLängsweg (z) / longitudinal way (z) 560 mmDrehzahlbereich / spindle speed 5000 UpM /rpmDrehzahl angetriebene Werkzeuge / speed of driven tools 4500 UpM / rpmWerkzeugrevolver / turret head 12 fach /holesEilgang X/Z / rapid feed X/Z 30/33 m/minAntriebsleistung Spindel / drive capacity spindle 15 kWGewicht der Maschine ca. / weight 4500 kgT ...

Manufacturer: MAZAK Type QT30 Built in 1998 Control Mazatrol T Plus Machine weight approx. 5100 kg x-travel 390 mm y-travel 1000 mm Turning diameter 510 mm Turning length 1000 mm Chuck diameter 210 Tool turret - Places 16 Spindle bore 71 mm

MAZAK QUICK TURN 200 Year of construction.2001 Fodder. 210 mm 8.5 inc Spindle bore. 61 mm Revolver. 8 pieces Engine. 43 kVA Control: MAZATROL 640 T PC-Fusion CNC, Chip conveyor. 8 pieces of tool holders, 4 pieces VIDEOS Japan Machine,

Description: Specification : Bed Length 26' Capacity Machine Swing : 29.5' / 760 mm Maximum Machining Diameter : 16.540' / 420 mm Maximum Working Capacity : 4' / 102 mm Maximum Machining Length : 23.8' / 603 mm Main Spindle Chuck Size : Kitagawa 15' Maximum Speed : 4000 rpm Motor Output (30 min rating) : 40 Hp / 30 kW Second Spindle Chuck Size : Kitagawa 10' Maximum Speed : 4000 rpm Motor Output (30 min rating) : 35 Hp / 26 kW Turret (Upper) Number Of Tools : 12 Maximum Speed : 6000 rpm Motor Output (30 min rating) : 10 Hp / 8 kW Feed Axes Travel (X Axis) : 11' / 280 mm Travel (Y Axis) : 6' / 150 mm Travel ((Z Axis) : 26.39' / 670 mm Travel (W Axis) : 26.63' / 650 mm Complete with Turbo Vacummentation SWL 69 kgs Swing Jib Crane, Demag electric lift hoist.turning diameter: 420 mm, Drehlänge: 603 mm, serial number: 325,905, turning diameter over slide: 29.5' / 760 mm mm, x-motio ...

Mazak Quick Turn 8 N Year of construction: 1990 Control: Mazatrol T32-2 X-axis: 100 mm Y-axis: 290 mm Max. turning diameter 120 mm Max. turning length 250mm Collet chuck Spindle passage 40 mm Three-jaw chuck D0165 8 tool slots Parts catcher High Pressure Pump