lathes used for sale (2,995)

spindle travel: 3000 mmspindle stroke - max.: 330 mm: 2820 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: - mmturning diameter over slide rest: - mmturning length: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: - mmturning length: - mmcontrol: BOSCH CC 200 total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mMovie:https://www.youtube.com/watch?v=lr-NrroeTtAThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 380 mmturning diameter over slide rest: 190 mmturning length: 1000 mmtotal power requirement: 4 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,5+1+1,8 mMovie:https://www.youtube.com/watch?v=ckpr4-sE7K4The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 220 mmturning length: 450 mmcontrol: Siemens 840 D main drive DC: 27 kWtotal power requirement: 27 + 8,5 + 5 + X kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 10 x 2 x 2 mMovie:https://www.youtube.com/watch?v=OffdO1J4G5YThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal CNC lathe with tailstock manufactured in 2004. This Takisawa TS-35 features a maximum turning diameter of approximately 400 mm and a turning length of 1000 mm. It is equipped with a powerful 26.1 kW main spindle motor and a chuck size of 304 mm. If you are looking to get high-quality turning capabilities, consider the Takisawa TS-35 machine we have for sale. Contact us for further details.

turning diameter: 100 mmturning length: 320 / 345 mmcontrol: Siemens 840 D swing diameter: 145 mmspindle distance: 580 mmslide I:: slide I - cross travel: (X1) 220 mmslide I - longitudial travel: (Z1) 320 mmy-axis: +/- 30 mmrapid traverse: (X/Y/Z) 30/15/30 m/minslide II:: slide II - cross travel: (X2) 120 mmslide II - longitudial travel: (Z2) 345 mmrapid traverse: (X/Z) 30 m/minSubspindle:: Travel subspindle: (Z3) 380 mmvertical stroke: (X3) 145 mmbar material dia.: max. 36 mmrapid traverse: (X/Z) 20/30 m/minpower capacity: (40/100 % ED) 26/21 kWspindle turning speed range: 40 - 7200 U/mintotal power requirement: 42 kVAweight of the machine ca.: 5,3 tdimensions of the machine ca.: mCNC turning and milling centre with Y-axis, 2 turrets, subspindle andbar feeder.A total of over 44,000 EUR has been invested in necessaryrepairs and maintenance over the last 5 years by DMG MORI (replaceme ...

- Very little hours- Hydraulic tailstock- CE Safety doors- Multi Fix Tool holders system  D1- Chip conveyor

- FAGOR 2 Axis Dro- Feed all directions- Conical turning attachment-  

x-travel: 185 mmz-travel: 385 mmcontrol: Mazatrol Matrix Nexus Maximum swing diameter: 550 mmMaximum turning diameter: 280 mmbar capacity: 51 mmworkpiece weight max.: 200 kgmain spindle speed: 35-6000 U/minmilling head speed: 25-4500 U/mintool turret: 12 Plätzerapid power traverse in X-and Z direction: 30/33 m/minspindle bore: 61 mmweight of the machine ca.: 3800 kgCapacity:Chuck size: 6 inchesMax. swing diameter: 550 mmStandard turning diameter: 221 mm Max. turning diameter: 280 mmMax. bar capacity: 51 mmDistance between spindle nose and turret edge: 84–469 mmMain spindle:Speed: 35–6000 rpmSpindle bore: 61 mmSpindle nose: A2-5Tailstock:Tailstock body travel: 350 mmMax. thrust: 1962 NTurret:Number of tools: 12 piecesTool size: External turning tool: 20 mm Internal tu ...

x-travel: 185 mmz-travel: 360 mmb-travel: 460 mmcontrol: Mazatrol 640 T Maximum swing diameter: 550 mmMaximum turning diameter: 280 mmworkpiece weight max.: 200 kgbar capacity: 51 mmmain spindle speed: 35-6000 U/minmilling head speed: 25-4500 U/minrapid power traverse in X-and Z direction: 30/33 m/minRapid traverse B axis: 30 m/mintool turret: 12 Plätzeweight of the machine ca.: 4100 kgCapacity:Chuck size: 6 inchesMax. swing diameter: 550 mmStandard turning diameter: 221 mm Max. turning diameter: 280 mmMax. bar capacity: 51 mmDistance between spindle nose and turret edge: 80–535 mmMain spindle:Speed: 35–6000 rpmSpindle bore: 61 mmCounter spindle:Speed: 35–6000 rpmSpindle bore: 52 mmTurret:Number of tools: 12 piecesTool size: External turning t ...

Traub TNL 20 – 9B Machine No. 11920182 Year of construction 2022 TX8i-s control (with Polyform / Helical / 19" multi-touch with gesture technology) Alternating operation: Use as a short or long-turning lathe Main spindle D20 (with 10,000 rpm) with C-axis Sub-spindle D20 with X/Z/C axis Tool carrier top X/Y/Z/H/B axis with 8 tool holders Tool carrier lower X/Y/Z/H axis with 8 tool holders Recirculating apparatus with 4 tool positions Cooling lubricant mist extraction and filter system Automatic CO2 extinguishing system Accuracy Package Tool breakage control device (Wkz beam above) Tool breakage control device (Wkz beam below) Hinge Belt Chip Conveyor Coolant system with 20 to 80 bar pump Charging magazine FMB Turbo 2-20 Sliding device for loading magazine Portal workpiece removal unit Workpiece conveyor belt

centre height: 200 mmcentre distance: 1.000 mmspindle turning speed range: 1600 U/minspindle bore: 42 mmturning length: 1600 mmturning diameter over bed: 410 mm: 230 mmmachine weight ab.: 1.700 kgdimensions: 2000 × 1000 × 1500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis NAKAMURA-TOME AS-200L was manufactured in 2018. It features a maximum turning diameter of 340 mm and a turning length of 570 mm. The machine includes a 12-station drum turret and a main spindle speed of up to 4500 rpm. If you are looking to get high-quality turning capabilities, consider the NAKAMURA-TOME AS-200L horizontal turning machine we have for sale. Contact us for further details.

This 4-axis DOOSAN Puma 2600 LYB II was manufactured in 2021. It features a maximum turning diameter of 376 mm and a turning length of 1,350 mm. The machine includes a 12-station turret, a live tailstock, and a steady rest with a diameter range from 40 mm to 200 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600 LYB II horizontal turning machine we have for sale. Contact us for further details.

turning diameter: 330 mmturning length: 669 mmcontrol: Sinumerik 828D total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Sinumerik 828D12-fold revolver Sauter VDI40driven toolsC-axis3-jaw chuckTool Eyepart catcherchip conveyortail stockcoolant device with high pressure pumpbar loading device IemcaTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 600 mmmax. Drehdurchmesser / max. turning diameter 330 mmmax. Drehlänge / max. turning length 669 mmX-Weg / X-travel 260 mmZ-Weg / Z-travel 762 mmDrehzahl / spindle speed 3400 UpM /rpmWerkzeugrevolver / turret head 12 fach /holesmax. Stangendurchmesser / max. bar diameter 75 mmEilgang X / rapid feed X 20 m/minEilgang Z / rapid feed Z 24 m/min.Gewicht der Maschine ca. / weight ca. 5700 kgT ...

turning diameter over bed: 380 mmturning diameter over slide rest: 190 mmturning length: 1000 mmbar capacity: 56 mmturning speed range: 25 - 2000 U/minspindle nose: A2-6 total power requirement: 4,0 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: LBH ca. 2,5 x 1,2 x 1,8 m- RÖHM 3 Jaw Chuck Ø 250 mm- MULTIFIX Holder - Size B - Tailstock- Coolant pump with reservoir- Various turning tool holders- Various small partsWorkshop machineOtherwise, the gearbox runs quietly and the guides have no scratches, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 7100 mmswing diameter: 8000 mmturning height: 5030 mmdistance between table and cross rail: 5495 mmworkpiece weight: 200 tfaceplate turning speed range: 0,3 - 19 U/minmain drive motor: 125 kWcross travel: 4400 mmswivel range of slides - vertical: +30 / -15 °Control: FANUC 18i-TB total power requirement: ca. 155 kWweight of the machine ca.: 291 tdimensions of the machine ca.: 8,6 x 17,6 x 8,3 m2003 Retrofit and change to CNC- CNC Control Fanuc 18i-TB--2-Axis simultanous (X- & Z)- Z-Axe with hydraulic balance- Digital Scale in X and Z Axis- 2 rams on crossrailThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 410 mmy-travel: 570 mmz-travel: 140 mmcontrol: Mazatrol Matrix Maximum working diameter: 545 mmMaximum working length: 519 mmmain spindle speed: 35 - 6000 U/mintool taper: Capto C6 rapid traverse y/x/z axis: 30/26/33 m/minPerformance/capacity:Max. swivel range: 545 mmMax. machining diameter: 545 mmMax. outside diameter for bar work: 51 mmMax. machining length: 519 mmMax. workpiece weight:-Chuck work: 150 kg -Bar work: 200 kgMain spindle:Spindle speed: 35-6000 rpmSpindle bore diameter: 61 mmMax. torque: 161 NmTailstock:Rapid traverse: 8 m/minTravel range (advance/return): 434/281 mmMilling head:Milling head type: Single spindle with ATCTool shank type: Capto C6Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 ? x 200 long mmMilling s ...

turning diameter over bed: 410 mmturning diameter over slide rest: 220 mmturning length: 1000 mmcentre height: 205 mm: mmspindle bore: 46 mmspindle turning speed range: 40 - 2000 U/mintotal power requirement: 22,0 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,42 x 1,3 x 1,55 mmLathes with:- Copying attachment- Forkardt 3-jaw chuck F250- Multifix tool post- Coolant system- Machine light- Chuck guard- Chip tray- Chip guard wall- Foot brakeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GENERAL Project No.: 905778 Quantity: 1 pcs. Manufacturer: TSUGAMI Type: BO326E-II Control: Fanuc 32i MB Year of Make: 2016 Condition: Used machine Approx. (hrs): 49661 DESCRIPTION TURNING 8Axles Max. turning diameter 32 mm Max. turning length 320 mm Max. speed main spindle 8000 1/min Max. power main spindle at ED 10-40/100% 5.5/3.7 kW Spindle aperture main spindle 8-32 mm Axes on the main spindle unit C Workpiece spindle stroke main spindle 320 mm Hollow clamping cylinder on the main spindle Max. speed sub-spindle 8000 1/min Max. power sub-spindle at ED 10-40/100% 3.7/2.2 kW Axes on the sub-spindle unit C Coolant supply through the sub-spindle Workpiece ejection through the sub-spindle Workpiece ejector in the sub-spindle OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Preparation f ...

GENERAL Project No.: 905776 Quantity: 1 pcs. Manufacturer: TSUGAMI Type: BO326E-II Control: Fanuc 32i MB Year of Make: 2014 Condition: Used machine Approx. (hrs): 32126 DESCRIPTION TURNING 8Axles Max. turning diameter 32 mm Max. turning length 320 mm Max. speed main spindle 8000 1/min Max. power main spindle at ED 10-40/100% 5.5/3.7 kW Spindle aperture main spindle 8-32 mm Axes on the main spindle unit C Workpiece spindle stroke main spindle 320 mm Hollow clamping cylinder on the main spindle Max. speed sub-spindle 8000 1/min Max. power sub-spindle at ED 10-40/100% 3.7/2.2 kW Axes on the sub-spindle unit C Coolant supply through the sub-spindle Workpiece ejection through the sub-spindle Workpiece ejector in the sub-spindle OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Preparation f ...

GENERAL Project No.: 905777 Quantity: 1 pcs. Manufacturer: TSUGAMI Type: BO326E-II Control: Fanuc 32i MB Year of Make: 2016 Condition: Used machine Approx. (hrs): 49590 DESCRIPTION TURNING 8Axles Max. turning diameter 32 mm Max. turning length 320 mm Max. speed main spindle 8000 1/min Max. power main spindle at ED 10-40/100% 5.5/3.7 kW Spindle aperture main spindle 8-32 mm Axes on the main spindle unit C Workpiece spindle stroke main spindle 320 mm Hollow clamping cylinder on the main spindle Max. speed sub-spindle 8000 1/min Max. power sub-spindle at ED 10-40/100% 3.7/2.2 kW Axes on the sub-spindle unit C Coolant supply through the sub-spindle Workpiece ejection through the sub-spindle Workpiece ejector in the sub-spindle OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Preparation f ...

Inv. Num. : 8986 Type: DH-250/4 Producer: WMW Created: 1983 Parameters: Length: 3400 mm Width: 2100 mm Height: 1600 mm Weight: 4800 kg

Vertical lathe Hessapp DVH 250 BJ 2004 (already dismantled)

CNC lathe Okuma Genos L3000 e MYW Control: OSP-P300LA-e Year of Make: 2021 Max. machining Ø: 390 mm Swing Ø over cross slide: 260 mm Max. turning length: 500 mm Travels: X-axis: 235 mm Z-axis: 450 mm Y-axis: ±50 C-axis: 360° / 0.001° Turret: 12 seats – all powered Speed: 38 - 3,800 rpm Tool holder: VDI 40 Accessories/Equipment - Chip conveyors - Touchsetter - one Touch IGF - Parts catcher - Reinforced coolant device 8bar - Suction

Swiss type turning machine manufactured in 2006. This TORNOS DECO 10a features an automatic and integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. It includes a Robobar SSF 3m loading magazine and is equipped with a FANUC 16i-TB control system. If you are looking to get high-quality turning capabilities, consider the TORNOS DECO 10a machine we have for sale. Contact us for further details.

This 4-axis DN SOLUTIONS LYNX 2100GA was manufactured in 2021. As new, showroom model. It features a maximum spindle speed of 6,000 RPM and a bar capacity of 45 mm. The machine is designed for high-performance compact turning, optimized for small precision parts. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS LYNX 2100GA horizontal turning machine we have for sale. Contact us for further details.

Swiss type turning machine manufactured in 2000. This TORNOS Deco 10a features a movable headstock, independent counter spindle, and a pivoting workpiece holder. It includes a loading magazine with a drum and a lubrication device for guide bushing. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 10a machine we have for sale. Contact us for further details.

turning diameter: 240 mmturning length: 530 mmcontrol: Siemens 810 D Powerline swing diameter: 560 mmx-travel: 207,5 mmz-travel: 530 mmturning speeds: 6000 U/min: 12 Stk. total power requirement: --- kWweight of the machine ca.: 6,1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.