lathes used for sale (3,152)

This 10-axis CMZ TTL66 turn-mill centre was manufactured in 2025. It features a maximum swing diameter of 800 mm and a maximum turning diameter of 515 mm. The machine is equipped with twin spindles and twin Y-axis turrets, allowing for simultaneous 4-tool machining capability. If you are looking to get high-quality turning and milling capabilities, consider the CMZ TTL66 machine we have for sale. Contact us for further details regarding this machine.

turning diameter: max. 356 mmturning length: 705 mmcontrol: MSX 850 III MAPPS Mitsubishigreates pass round over bed: 923,8 mmSwing dia. over traverse guideway: 755 mmstandard turning dia.: 275 mmMain spindle:: max. spindle speed: 4.000 min/-1power capacity - main spindel: 18,5 / 15 kWspindle nose: JIS A2-8 spindle bearing diameter: 140 mmspindle bore: 91 mmmax. bar capacity: 80 mmchucking diameter: 305 mmC-Axis: 0,001 °Subspindle:: Spindle speed range subspindle: max. 6.000 min/-1power capacity - Sub spindle: 11 / 7,5 kWspindle nose: JIS A2-5 spindle bearing diameter: 85 mmspindle bore: 43 mmchucking diameter: 210 mmC-Axis: 0,001 °turret:: number of toolpositions: 12 pos.Number of driven toolspositions: 12 pos.Shank diameter: 26 mmDrill shank diameter: 50 mmSpindle speed - driven tool stations: max. 6.000 min -1turret change time: 0,25 sec.axis stroke:: x-axis: 260 mmz-axis: 795 mm ...

Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: OPTIMUM, Lead screw and feed screw lathe type D320X920 -Machine bed: hardened -Turning length: 930 mm -Turning diameter over bed: 320 mm -Turning diameter without bed: 500 mm -Turning diameter over support: 180 mm -Spindle bore: Ø 40 mm -Spindle speeds: 65 - 1800 rpm -Three-jaw chuck: Ø 160 mm -Tailstock mount: MK3 -Drive: 1.5 kW -Accessories: 2x bezels, Multifix tool holder, see photos -Dimensions: 730/1590/H1310 mm -Weight: 525 kg

turning diameter: 210 mmturning length: 700 mmcontrol: Okuma OSP-E 100 L total power requirement: 35,7 kVAweight of the machine ca.: 7,1 tdimensions of the machine ca.: 2660 x 2000 x 2330 mCNC turning and milling center with C-axis and Y-axis,2 turrets, and subspindle.CNC control: Okuma OSP-E 100 LMaximum turning diameter: 210 mmSwing over bed: 400 mmDistance between spindle noses: 960 mmMain spindle:Spindle bore: 53 mmSpeed range: 50 to 6000 rpmMotor power: 11/7.5 kWSubspindle:Spindle nose: JIS A2-6Speed range: 38 to 5000 rpmMotor power: 11/7.5 kWZ-axis:Travel: 700 / 700 mm (ZA + ZB)Rapid traverse: 40000 mm/minW-axis:Travel: 940 mmRapid traverse: 40000 mm/minX-axis:Travel: 167 / 192 mm (XA + XB)Rapid traverse: 30000 mm/minY-axis:Travel: 92 mm (+50/-42 mm)Rapid traverse: 15000 mm/minC-axis:Indexing: 360° x 0.001°Rapid traverse: 400 rpmDisc turret:2 x 12 stationsTool holder mount: VDI 3 ...

Offer 26083 Technical data: - Center height / center width 210 / 1500 mm - Largest rotary, Ø over bed / over face slide 420 / 270 mm - Largest turning diameter with removed bridge 640 mm - Length of the bed bridge approx. 270 mm - Spindle bore 58 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 180 mm - Spindle speeds 45 - 1800 rpm - Feeds - longitudinal 0.031 - 1.70 mm/rev - Flat 0.14 - 0.784 mm/rev - Travel of the upper slide 128 mm - Face slide travel 285 mm - Metric thread pitches - Inch thread - Drive 400 V / 7.5 kW - with: - tailstock, 3-jaw chuck, quick-change steel holder, - Digital display - Space requirement approx. W 2850 x H 1500 x D 1200 mm - Weight approx. 2000 kg

faceplate diameter: 1300 mm: 1600 mm : Ja mit Kassette y-travel: 900 Verfahrensweg mmweight of the machine ca.: 14 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2023 : 1675 : prompt, Zwischenverkauf v : Bulgarien : 17600 €: 1 : 325 mm: 1000 mm: 165 mm: 32 mm: 190 mm: 200 mm: 5 : 4,5 MK: 12 : 85 - 2.000 1/min: 48 : 0.006 - 1.77 mm/U: 0.003 - 0.885 mm/U: 0.1 - 28 mm: 75 - 2,5 Gänge/: 0.1 - 1.75 : 150 mm: 95 mm: 40 mm: 3 MK: 100 mm: 2.2 kW: 2150 mm: 950 mm: 1350 mm: 770 kgdemo machine / mint conditionnet price (price for new machine € 23.970,00)driven by manual transmission3-axes digital readout Fagor 40iquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 160 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",incl. following optional equipment:1 lenght stopBUYING USED MACHINER ...

turning diameter: 250 mmswing diameter: 250 mmturning height: 250 mmControl: Siemens Sinumerik 840 D total power requirement: 60 kWweight of the machine ca.: 9 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mmturning length: . mmcontrol: Mazatrol 640 T x-travel: 190 mmy-travel: 1000 mmz-travel: 575 mmturning speeds: 4000 U/minfeed: 30 m/minnumber of tools: 12 bar loader: nein total power requirement: 18,5 kWweight of the machine ca.: 5,9 tdimensions of the machine ca.: 5600x2100x2200 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us Morethan 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business,please contact us. You can find further offers on our website. Tours arepossible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with Mo ...

turning diameter: 280 mmturning length: . mmcontrol: Mazatrol 640 T x-travel: 190 mmy-travel: 309 mmz-travel: 330 mmturning speeds: 4000 U/minfeed: 30 m/minnumber of tools: 12 bar loader: ja total power requirement: 24 kvAweight of the machine ca.: 3,5 tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us Morethan 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business,please contact us. You can find further offers on our website. Tours arepossible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the soft ...

This 7-axis Maier ML 26 C1 was manufactured in 2000. It features a maximum bar diameter of 26 mm and an impressive spindle speed of 8000 rpm. The machine includes 5 turning tools and 3 axial drilling tools, along with a bar feeder model Iemca Boss 322r-E. If you are looking to get high-quality turning capabilities, consider the Maier ML 26 C1 swiss type turning machine we have for sale. Contact us for further details.

Operation unknown/ Equipped with LNS type Quick load servo III Auction-ID: A1-46783-6

Equipped with gantry loader Mazak type flex-GL200N Auction-ID: A1-46783-24

Swing diameter over bed/cross slide: 320mm/150mm, center height: 160mm, distance between centers: 750mm, max. turning length: 740mm, travel X/Z: 185mm/700mm, chuck diameter: 200mm, speed: 4000rpm, rapid traverse X/Z: 5m/10m/min, tool stations: 8, tailstock quill stroke: 120mm, tailstock quill diameter: 60mm, machine dimensions X/Y/Z: approx. 2300mm/1500mm/1700mm, weight: approx. 2000kg, control: Heidenhain. Documentation available. An on-site inspection is possible.

Expanded to Ø 36 mm 6 spindles KADIGO Tool Monitoring with bar feeder IEMCA PRA 52/42 F (4m - poles) Accessories

6 spindles KADIGO Tool Monitoring with bar feeder IEMCA PRA 52/42 F (4m - poles) Accessories

ZMM SLIVEN CU 400 Lead and pull spindle lathe 3-axis digital display MITUTOYO max. turning length 2,000 mm Center height 250 mm Hollow spindle diameter 60 mm Equipment: Three-jaw chuck 250 mm All other accessories visible in the pictures and video are not included in the scope of delivery, therefore not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. FCA (Free Loading Truck) D-32457 Porta Westfalica Packaging only Delivery time immediately Subject to prior sale / payment immediately upon completion of purchase

SAEILO SJ-660/3300 Lead and pull spindle lathe Year of construction 2015 3-axis digital display K&C ARBAH-L Center width 3,300 mm max. tip height 330 mm Turning diameter over 660 mm Turning diameter over face slide 438 mm Bed width 400 mm Spindle mount DIN 55029 - Camlock - size D1-8 Spindle bore 82 mm Spindle speed range 15 - 1,500 rpm, 12 steps Equipment: Four-jaw chuck approx. 300 mm Bezel Coolant Setup Multifix clamping system Machine Light Technical data & installation plan – see PDF. All technical information, illustrations and content are non-binding and without guarantee. Subject to changes, errors. All other accessories visible in the pictures and video are not included in the scope of delivery, therefore not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice.  ...

The largest diameter of the workpiece mm. 4000 The largest diameter of the workpiece above the caliper mm. 3200 Maximum length of workpiece mm.20000 Main motion motor power kW 160 Largest tonn part weight. 160 Machine tonn weight. 314...

Offer 26143 Technical data: - Tip height 165 mm - Center width 750 mm - Turning diameter over bed 330 mm - Turning diameter via face slide 170 mm - Spindle bore 42 mm - Pick-up cone of the tailstock quill MK 3 - Travel of the tailstock quill 140 mm - Spindle speeds 18 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V / 1.5 / 2.8 kW - with: - 2 pieces 3 jaw chucks - Bezel - 4 pieces SWS steel holder - Div. Drehmeisel - Space requirement approx. W 1800 x H 1150 x D 900 mm - Weight approx. 800 kg

CNC lathe COLCHESTER ALPHA 2800XS

Hardinge GS42 CNC Lathe Year of construction 2017 Fanuc Oi-TF CNC Control Bar passage 42 mm Main spindle 6,000 rpm 12-speed tool turret Tailstock Hydraulic chuck Machine weight approx. 2,800 kg Only approx. 600 operating hours Very neat condition Ready to use

A CNC universal lathe is available. Swing diameter over bed/facing slide: 680mm/465mm, max. turning diameter: 465mm, max. turning length: 1050mm, travel X/Z: 300mm/1050mm, rapid traverse: 20m/min, speed: 3250rpm, tool positions: 12, tool holder: VDI40. Machine dimensions X/Y/Z: approx. 3300mm/1950mm/2500mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible.

Offered is a conventional lathe. Swing diameter over bed: 500mm, swing diameter over support: 300mm, spindle bore: 58mm, taper in the tailstock quill: MT 4, design: conventional leadscrew and feed rod lathe, control: manual. Equipped with three-jaw chuck, four-way tool post, tailstock, chip tray. Weight: approx. 2200kg, overall dimensions X/Y/Z: approx. 2700mm/1100mm/1350mm. Inspection possible by arrangement.

Swing diameter over bed/facing slide: 330mm/260mm, max. turning diameter: 200mm, max. turning length: 450mm, travel X/Z: 160mm/450mm, rapid traverse: 30m/min, speed: 5000rpm, tool stations: 12, tool holder: VDI30, max. workpiece weight: 100kg. Machine dimensions X/Y/Z: approx. 3300mm/1750mm/2400mm, weight: approx. 3800kg. Documentation available. An on-site inspection is possible.

: gebraucht : 2011 : 010192 : prompt, Zwischenverkauf v : Deutschland : 26700 €: 1 : 320 mm: 650 mm: 160 mm: 40 mm: 192 mm: 205 mm: 5 : 5 MK: 16 : 48 - 2500 1/min: 24 : 0.02 - 0.63 mm/U: 0.006 - 0.2 mm/U: 0.25 - 8 mm: 80 - 2 Gänge/: 0.2 - 4 : 200 - 5 : 150 mm: 100 mm: 40 mm: 3 MK: 85 mm: 2,4 / 3 kW: 1582 mm: 715 mm: 1245 mm: 720 kgHeidenhain 3-axis digital readoutNEW Röhm 3-jaw chuck, 160 mm diameter, with internal and external jawsQuick-change tool post with one rectangular insert and one round insertQuick-release collet chuck with collets from 3 to 29 mm diameter (in 1 mm increments)Live centreDrill chuckChuck guardLead and feed screw guardMotor brakeCoolant systemMounting feetOperating instructions in German with CE declaration of conformityBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGH ...

Horizontal turning machine manufactured in 2001. This Monforts RNC 400 A features a swing over bed of 410 mm and a turning length of 600 mm. It is equipped with a 12-position disc turret and a powerful three-phase induction motor with a speed range of 30-4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 A machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2025. This STYLE 510 (1350) features a swing over bed of 510 mm and a distance between centers of 1,350 mm, accommodating workpieces up to 600 kg. It includes an 8-position automatic VDI-40 turret and a powerful 15 kW spindle with a maximum speed of 2,500 rpm. If you are looking to get high-quality turning capabilities, consider the STYLE 510 (1350) machine we have for sale. Contact us for further details.

turning diameter: 570 mmturning length: 2000 mmcontrol: num + CNC Keller centre height: 280 mmturning dia. over face-slide: 365 mmspindle bore: 62 mmspindle turning speed range: 3 - 2500 U/minspindle head: DIN 55 027 Gr. 8 cutting speed: Konstant 1 - 9999 m/minfeed in x - axis: 0,01 - 50 mm/Ufeed range Z-direction: 0,01 - 50 mm/Urapid travel - longitudinal/face: 10 / 5 m/minfeed power: x-Achse 7100 Nfeed power: z-Achse 12.500 Ntravel of cross-slide: 345 mmupper slide travel: 125 mmbed width: 360 mmtailstock quill diameter: 80 mmtailstock quill stroke: 190 mmtailstock taper MT: 5 max. workpiece weight -without tailstock: 400 kgmax. workpiece weight between centres: 1000 kgmax.workpiece weight:each extra steadyrest: 300 kgthreading metric: 0,1 - 400 mm/Stg.dimensions of machine L x W x H: 3,98 x 1,87 x 1,81 mtotal power requirement: kWweight of the machine ca.: tAccessories: 3-jaw ch ...

turning diameter: 65 mmturning length: 150 mmcontrol: Siemens 840D spindle passage: 75 mmturning length: 150 mmc-axis: 2x 0,001 °gripping station: 65 mmspeeds: 5000 U/minrapid traverse: 30 m/minturret (x-stations): 3x12 Number of working hours: hNumber of axles: 10 St.number of toolholder-holes: 36 chip conveyor: ja / yes kWcoolant filtering unit: ja / yes kWtotal power requirement: 22 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 4,4 x 2 x 2,3 + Iemca mbar loader: Iemca Master 880 DMG Sprint 64 Linear CNC lathe, built in 2007, 10 axes, 2 spindles,3 turrets with Iemca Master 880 loading magazineAccessories:a large number of tool holdersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.