other metal working machines used for sale (10,904)

Manufacturer: Rösler Model: RBD 600-2/4 Year of Manufacture: 2007 Technical Data Connection Values / Power Requirements - Supply Voltage: 3 x 400 V - Compressed Air Quality: Cleaned, dried, oil-free, filtered, filter 40 um, residual moisture at 20 C less than 30% - Ambient Temperature / Humidity: +5 C to +40 C, per DIN 40040 G (annual average less than 65%, within 60 days less than 85%) - Blast Media Fill Quantity (kg): approx. 1500 - Required Dust Extraction Capacity (m3/h): 5600 Dimensions / Weights - Length (mm): 12400 - Width (mm): 3800 - Height (mm): 2300 - Weight of Heaviest Single Component (kg): 6000 Find more here - / Contact us at -

Manufacturer: SAF Model: NERTAJET HP120 Year of Manufacture: 2000 Operating hours : 17,901h Features: - Working format: 1500 x 3000 mm (2000 x 3000 mm possible) - Steel: - max. 20 mm at approx. 900 mm/min - 1 mm at approximately 6,500 mm/min - Stainless steel: - max. 15 mm at approx. 700 mm/min - 1 mm at approximately 5,500 mm/min - Aluminum: - max. 20 mm at approx. 800 mm/min - 1 mm at approximately 5,000 mm/min - features a sophisticated extraction system that selectively extracts air only where the burner is operating. Sensors mounted on the rail pneumatically control the dampers in the air duct. (Filter system not included.) - Underwater cutting: The water level in the basin can be lowered or raised at the touch of a button, controlled by a water level sensor and compressed air-operated mechanism, for comfortable cutting. - Flexibility: Allows both wet and dry cutting. - Spare a ...

Technical data: Lifting speed: 16 - 182 m/min Stroke length: 400 mm autom. Table infeed in X/Z: 0.2 - 4.0 mm Swivel head: yes Dimensions, approx.: 1950 x 1330 x 1570 mm Weight, approx.: 1500 kg

Used, technically overhauled reinforcing steel shears. Footswitch with emergency stop function. Hydraulic counter holder Cutting capacity max.1 rod 45mm D. Power 11 KW.

Used, technically overhauled reinforcing steel bending machine. 4 pieces of counter retaining strips. 2 footswitches with emergency stop function. Max. bending capacity 1 rods 28mm D. Bending speed 6/16 revolution.min. Control with bending pins for three angles adjustable by hand. Power 3.5 KW.

Used, technically overhauled reinforcing steel bending machine. 4 pieces of counter retaining strips. 2 footswitches with emergency stop function. Max. bending power 2 rods 28mm D. Bending speed 6/13 revolution.min. Control Siemens Touch Display CC Power 4 KW.

Machine Type: Precision Cutting Machine Manufacturer: HASCO Model No.: A 190 Year of construction: approx. 1987 Condition: Very good general condition Shipping time: Immediately available Technical data Workpiece diameter: approx. Ø 0.8 – 25 mm Speed cutting spindle: approx. 8,800 rpm Cutting wheel dimensions: approx. Ø 125 × 1.5 × 20 mm Grinding spindle speed: approx. 4,400 rpm Grinding wheel dimensions: approx. Ø 100 × 50 × 20 mm Machine data Dimensions (L × W × H): approx. 1000 × 500 × 1250 mm Weight: approx. 150 kg Accessories Operating instructions Various attacks Cutting disc Grinding wheel Other accessories on request

5-axis two-spindle center with pseudo-palletization Type: DZ 24 Magnum Manufacturer: Chiron Year: 2015 Hours: 57000 Control: Siemens Sinumerik 840 D Table clamping surface 2X D 500 mm X: 830 mm Y: 630 mm Z: 630 mm A: rotating drum C: rotary tables Spindle speed: 0 - 20000 rpm Number of controlled axes: 5 No central cooling Spindle clamping cone: HSK-A63 Tool magazine: 2 x 30 positions Machine weight: 18500 kg Dimensions: 7000 x 3200 x 3500 mm BLUM aiming laser probe Chip conveyor Find more here - / Contact us at -

Manufacturer: DONAU Model: DR 50 Find more here - / Contact us at -

turning diameter: - mmturning length: - mmcontrol: - : ohne Gewähr total power requirement: - kWweight of the machine ca.: 4 tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 12 bartotal power requirement: 22 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: DMG Model: ECO 210 Year of Manufacture: 2007 Electrical Data: Voltage: 230 V Frequency: 50 Hz Power Consumption: Max. 650 VA Find more here - / Contact us at -

2011 OPS Ingersoll Gantry Eagle 5 (often referred to as the Eagle G5 or Gantry Eagle 500) is a high-precision Sinker EDM (Electric Discharge Machining) machine. Feature Specification X / Y / Z Travels 525 mm / 400 mm / 450 mm Work Tank Type Drop-tank (rises/falls for easy access) Max Workpiece Weight 1,000 kg (2,205 lbs) Generator Eagle PowerSPARK (60 Amp standard, 110 Amp optional) Z-Axis Jump Speed 18 m/min (This is exceptionally fast for EDM) Find more here - / Contact us at -

feed pressure: 12 barNumber of working hours: ca. 17.402 htotal power requirement: 22 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The Charmilles Robofil 2020 is a high-precision Wire Electrical Discharge Machine (Wire EDM). Manufactured in Switzerland, this machine is designed for detailed "erosion" work, making it a staple in toolmaking and the production of complex medical or industrial components. Here is a clean, structured text block for the Charmilles Robofil 2020 (1994) that you can copy and paste directly into an online listing or equipment database. --------------------------------------------------------------- Machine Specifications: Charmilles Robofil 2020 General Information - Manufacturer: Charmilles Technologies (Switzerland) - Model: Robofil 2020 - Year of Manufacture: 1994 - Machine Type: CNC Wire-Cut Electrical Discharge Machine (Wire EDM) Technical Travel & Capacity - X-Axis Travel: 320 mm (12.5") - Y-Axis Travel: 220 mm (8.6") - Z-Axis Travel: 116 mm (4.5") - U/V Axis Travel: ± 48 mm (fo ...

Fanuc manipulatierobot die een last van 700 kg kan hanteren Het heeft een bereik van 2832 mm en is gemonteerd op een chassis van ± 18 meter.

Picot 2100 x 10 mmNumber of rolls: 3 rolls Roll capacity cold: 2100 x 10 mm Roll dia upside: Ø 240 mm Dia under roll - side rolls: Ø 180 mm Weight: 3200 kg

Number of Spindles8Gun Drilling Diameter Range1.5mm-10mm (Per Spindle)Maximum Drilling Depth150mmDrill Spindle Stroke350mmPellet Die Diameter500mm-1550mmB-Axis Accuracy+/- 6 Arc SecondsY-Axis Vertical Travel400mmGun Drill Speed Range0-14,000 RPM   The LD8-150 Pellet Die is a multi-spindle gun drilling machine from Mollart’s line of deep hole drilling machines that provides accurately drilled holes for pellet dies up to 1550mm in diameter. The LD8-150 is an eight spindle (also available in four spindle) deep hole drilling machine for designed for accurately drilling thousands of holes in to pellet dies. The drilling spindles are arranged radially around the work spindle to provide simultaneous drilling on all sides of the die for maximum efficiency. The machine can be outfitted with various workholding options for securing the pellet dies for drilling, providing  ...

Manufacturer: ELB Model: Optimal 6375 Year of Manufacture: 1990 Magnet 500 x 350 mm Accesories: Coolant tank 5 grinding wheel flanges Various used grinding wheels Balancing scale with mandrel for grinding wheels Find more here - / Contact us at -

The 2003 Mazak VTC 300 is a Vertical Traveling Column (VTC) machining center designed for handling long, heavy, or oversized workpieces that might be awkward on a traditional moving-table machine. Find more here - / Contact us at -

Robot cell including safety enclosure and light curtain 6-axis robot HYUNDAI HH020 Transfer weight/free payload 13 kg Matrix version, material supply using matrices We currently have 2x SherpaLoader 20 in stock, e.g. built in 2018, approx. 7,500 operating hours (of which >70% is waiting time in front of the machine for the next loading request). Component dimensions Ø10 – 200 mm, length 10 – 200 mm; effective payload up to 13 kg, raw parts are supplied to this system via grid matrices. Before sale, the system will be serviced with - Software update for master control and HMI - Gear grease change on axes 1 - 6 - Encoder battery replacement on axes 1–6 and mainboard - Replacement of all energy chain cables on axes 3–6 Find more here - / Contact us at -

Control: Fanuc x-travel: 660 mmweight: 4 t: ja control: Fanuc 10 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: KAESER Model: BSD 72 SFC Year of Manufacture: 2012 Machine type: Screw Compressor Rated Power: 37.0 kW Motor Speed: 2960 1/min Max. Operating Pressure: 8.5 bar Ambient Temperature: 3 degrees C / 45 degrees C

Manufacturer: Bystronic Model: BySprint Fiber 3015 Year of Manufacture: 2013 4KW Find more here - / Contact us at -

x-travel: 4500 mmy-travel: 2000 mmz-travel: 1200 mmspindle taper: ISO 50 Cube: 2 weight of the machine ca.: 20.000 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe tool shown in the illustration is a Sandvik Coromant T-Max Q-Cuthead for grooving, identified more precisely by part number 570-40R1513-09-50. Manufacturer: Sandvik Coromant Type: T-Max Q-Cut head for grooving (slotting) Connection: SL head (screw-mounted) - size 40 Hand: Right-hand Maximum cutting depth: 9 mm Coolant supply: Axial concentric inletThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralCNC Grindingmachine; Control: Fanuc 32iA Special equipmentRMS-SensorSpecial equipment-Transformer - Handwheel - 680l coolant systemSpecial equipment- Program memory (512kb) - Registerable programs (1000 pcs.) - Signal light (3-stage) - High-performance magnetic separator (120 l/min) - Bed cleaning - Coolant temperature control unit - Wheel spindle cooling function - ATC unit (6 tools)

Machining sides: 3, workpiece materials: aluminium/steel, travel X: 4000mm, feed rate: 120m/min, A-axis: +/-110°, spindle speed: 18000rpm, tool holder: SK30, tool positions: 8, max. profile dimensions X/Y/Z: 4000mm/250mm/190mm, machine dimensions X/Y/Z: approx. 5750mm/2100mm/2350mm, weight: approx. 4000kg, control: Mecal. Documentation available. On-site inspection is possible.

workpiece weight per basket: 0basket dimensions: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pulling force - max.: tmax. ram stroke: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.