other metal working machines used for sale (10,782)

Manufacturer: HAAS Model: VF6 SS Year of Manufacture: 2008 Machine Type : Vertical Machining Center - Control: Haas CNC Axis Travels - X axis: 64 inches (1,625 mm) - Y axis: 32 inches (813 mm) - Z axis: 30 inches (762 mm) Spindle - Spindle speed: 12,000 RPM - Spindle taper: 40 taper (CT40 / BT40) - Spindle type: inline direct-drive, high-efficiency (HE) - Spindle motor: 30 HP Tool Changer - Type: side-mount automatic tool changer (SMTC) - Configuration: high-speed Super Speed ATC Electrical Requirements - Voltage: 360/480V - Phase: 3-phase - Frequency: 50/60 Hz - Full load: 40 amps - Largest load / short circuit: 70 amps - Interrupting capacity: 10,000 amps - Enclosure: NEMA Type 1 - indoor use only Find more here - .ucymachines/ Contact us at - sales@ucymachines

wire diameter - max.: 2,5 mmwire diameter - min.: - mmworkpiece length - max.: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Mazak Model: Super Turbo X510 MkII Year of Manufacture: 2007 Machine Type : Flatbed CO2 laser cutting machine CNC control: Mazatrol Preview Operating hours : 27.000 h Technical Specifications - Working area: 3050 x 1525 mm (5 ft x 10 ft) - X axis travel: 3235 mm - Y axis travel: 1545 mm - Z axis travel: 100 mm - Laser type: CO2 continuous wave - Laser power: 1800W - Maximum workpiece size: 3050 x 1525 x 22 mm - Maximum table load: 805 to 930 kg - Rapid traverse speed: 24 m/min (945 IPM) - Maximum cutting speed: 20 m/min - Machine weight: approximately 12,700 to 13,900 kg depending on configuration Maximum Cutting Thickness by Material - Mild steel: up to 22 mm - Stainless steel: up to 12 mm - Aluminium: up to 8 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines

wire diameter - max.: 2 mmwire diameter - min.: - mmworkpiece length - max.: - mmtotal power requirement: - kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer:Agie Model: Agiecut Challenge 2 Year of Manufacture: 2001 Machine Type : Wire EDM Machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Kellenberger Model: Kel-Vision URS 125/430 Machine Type : Grinding Machine Condition : Defective Electrical Specifications - Supply voltage: 3 x 400 V - Frequency: 50 Hz - Working voltage: 3 x 400 V - Control voltage: 230 V - Nominal current: 28.5 A - Main fuses: 35 T Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Jung, Model: JF 520 Year of Manufacture: 1979 Machine Type : Grinding Machine Electrical Specifications - Voltage: 380 V - Phases: 3 - Frequency: 50 Hz - Nominal current: 30 A - Supply fuses: 35 A - Control voltage: 220 V Find more here - .ucymachines/ Contact us at - sales@ucymachines

Haco PPES 110 ton x 4100 mm CNCCapacity: 110 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 11 mm/sec Returning speed: 100 mm/sec Electric motor (power): 11,4 kW Length: 4210 mm Depth: 1500 mm Height: 2530 mm Weight: 11 ton

12 CNC-assen: Y1 / Y2 / Y3 / Y4 / V / X1 / X2 / X3 / X4 / R1 / R2 / R3 / R4 / X5 / X6 / Tandem kantbank: 2 x 2000 ton GWF Als je een werkstuk van 16 meter lang buigt, is de maximale keeldiepte 1250 mm. Buigvoorbeeld: 35 mm (normaal staal) over een lengte van 16 meterCapacity: 4000 ton x 16 200 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 4600 mm (2x) Max stroke: 1000 mm Max distance between table -- ram: 1650 mm Depth of throat: 1250 mm Table width: 650 mm Locking speed: 70 mm/sec Working speed: 4 > 7,5 mm/sec Returning speed: 75 mm/sec Electric motor (power): 75 kW (2x) Power needed: 380V Length: 7100 mm Depth: 5000 mm Height: 6350 mm (above floor) Weight: 500 ton (2x 250 ton) Capacity: 4000 ton Bending length: 16200 mm

TECO Office 600 All FUll time surge protection

SMA SMA Cluster controller CLCON-S-10

Schneider Sepam S10UD XXX JXX XNT + voltage connector CCT 64

7 assen: Y1 / Y2 / X / X2 / Z1 / Z2 / R Amadabombeertafel met Digipro-optie: CNC-buighoekmeetsysteem Sick laserbeveiliging aan de voorkant Plooimessen in een gereedschapskast: • 00300 – 60° - R6.0 2x 835 • 04706 – 88° - R0.6 4x 835 • 05206 – 88° - R0.6 10, 15, 20, 40, 50, 100R, 100L, 200, 300 • Z24511 – 45° - 0,37° 4x 835 • Z24512 – 45° - 0,37° 415 • Z24513 – 45° - 0,37° 10, 15, 20, 40, 50, 100L, 200, 300 • 45308 – 88° - R0.8 10, 15, 20, 40, 50, 100R, 100L, 125, 138, 200, 270, 300, 310, 370, 835 Buigmatrijzen in een gereedschapskast: • 07900 – 88° - V20 4x 835 • 07980 – 88° - V20 10, 15, 20, 40, 50, 100, 200, 400 • 07700 – 88° - V16 4x 835 • 07780 – 88° - V16 10, 15, 20, 40, 50, 200, 400 • T12451 5x 835 • 129001 5x 835Capacity: 130 ton x 4100 mm Backgauge: CNC Control: AMNC-PC Touch Passage between uprights: 3760 mm Max  ...

met plaatsteunsysteemCutting length: 4100 mm Max sheet thickness st 45: 6 mm Strokes/min: 11 > 24 str/min Backgauge: electric - 1000 mm Adjustable cuttingedge: 0,5 > 2,5° Electric motor (power): 20 HP Length: 4500 mm Depth: 1942 mm Height: 2050 mm Weight: 8,3 ton Number of sheet holders: 23x

Manufacturer: Keyence Model: IM-8000 Type: Image Dimension Measurement System Software Version: B-13.0.0.28-11.07-20.07.09.01 / A2.05-A1.27-A3.03-9B.06-9B.06-02.01-03.02 Sensor: 20-megapixel CMOS Stage Size: 300 x 200 mm Measurement Capacity: Up to 300 features in a single measurement cycle Condition: Used, fully functional Find more here - .ucymachines/ Contact us at - sales@ucymachines