other metal working machines used for sale (10,782)

his Mazak VCN 510C is a vertical machining center manufactured in 2003, designed for precision 3-axis machining operations. It features a robust construction with a machine weight of approximately 6000 kg, ensuring stability during high-speed machining. Technical data Travel distances: X 1050 mm / Y 500 mm / Z 500 mm Spindle: 12,000 min⁻¹, SK40 Tool magazine: 30 positions Control: Fusion Table size: approx. 1300 × 550 mm Cooling: 15 bar IK Machine weight: approx. 6,000 kg Machine is in daily use, ready for immediate operation Chip conveyor IKZ Documentation available Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1770 A, 1220 , 70

The OPS INGERSOLL EDM machine GANTRY 1200 HSJ / 64 bit, built in 2006, has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts have been carefully checked. The following overhaul work was carried out on the above-mentioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axis. Replacement of all (4) ball screws of the tank drive. Inspection and test of the C-axis for tightness and accuracy Geometric verification of all axes according to OPS INGERSOLL protocol. Basic cleaning of the complete machine base. Cleaning of the complete working tank including replacement of the felt scrapers. Complete painting of the machine. Overhaul of the dielectric pumps.  ...

Key data: 1000 kg, 6800

OPS INGERSOLL GANTRY EAGLE 800 Year of construction 2013 EAGLE Powertec PC/NC Controller 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn Quick Programming Powertec Handheld Multifunctional Handheld Controller Manual EDM with Powertec Handheld EAGLE Powertec - Fine Finishing Generator PT 60, 60 Ampere High Speed Jump max. 18,000 mm/min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disc magazine Work container (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system incl. fire damper Electrode clamping system EROWA ITS ECOTEC Energy Saving Func ...

Demag 3,2 ton x 17 500 mmKind of: overhead travelling crane Capacity: 3,2 ton Span: 17 500 mm

SWF-hijsinstallatieKind of: overhead travelling crane Capacity: 10 ton Span: 17 000 mm

Cluma 10 ton x 18 600 mmKind of: overhead travelling crane Capacity: 10 ton Span: 18 600 mm

Trumpf TrumaBend V230 8 assen: Y1 / Y2 / X / R / Z1 / Z2 / V / W bovenste en onderste Willa hydraulische gereedschappen met Trumpf ACB-optie; hoekmeetsysteem 3 beweegbare plaatsteunen aan de voorzijde veel gereedschappen inbegrepenCapacity: 230 ton x 3100 mm Backgauge: CNC Control: Delem Passage between uprights: 2690 mm Max stroke: 365 mm Max distance between table -- ram: 535 mm Depth of throat: 410 mm Table width: 200 mm Locking speed: 200 mm/sec Working speed: 1 > 10 mm/sec Returning speed: 135 mm/sec Electric motor (power): 30 kW Length: 3660 mm Depth: 2120 mm Height: 3095 mm Weight: 17,7 ton

Fully functional Eldec hardening plant Year of Make: 2014 Type: MIND 750 CNC Machine Number: KA20130186 Serial Number: SY14001 Operating hours: 32,767 h Accessories: KLH Tank Pumps Heat Exchanger Station TPW100 TPW100-00-ELD Year of construction 2013 Location of the machine: 73430 Aalen The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.

Fully functional Vertical internal broaching machine with electromechanical drive Manufacturer: Arthur Klink Pforzheim Type: RISH-M 10 x 1,250 x 500 with 4 broaching points Year of Make: 2014 Machine number: 03.2734 Control: Siemens Sinumerik 840 D Total weight of the machine: 24,000 kg Operating hours: 56,674 h Accessories: Slide conveyor type 2.126-3 (magnetic belt) Item number: 12513433-00-0 Year of construction 2014 FLT Portal Machine number: 03.2734 Year of construction 2014 Location of the machine: 73430 Aalen We are happy to send you videos in advance. The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you  ...

A Mazak HCN 4000 is a high-performance Horizontal Machining Center (HMC).In the world of CNC machining, the HCN (Horizontal Center Nexus) series is Mazak’s workhorse for high-speed, high-precision production Technical data: Travel distances: X-axis: 560 mm Y-axis: 640 mm Z-axis: 640 mm Table: Pallet size: 400 x 400 mm Number of pallets: 2 Indexing: 1° increments Spindle: Spindle mount: SK-40 Max. speed: 18,000 rpm Power: 35 kW Tool magazine: Capacity: 60 tools Equipment: Control: Mazatrol SmoothG Tool length measurement Cooling through the spindle at 32 bar Niagara flushing Air through the spindle Renishaw OMP 60 probe Renishaw Inspection + (version 2022) Tool ID system Chip conveyor Additional filter cartridges Thread cutting without compensation chuck G00 tilt function CE marking Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Rösler Model: RBD 600-2/4 Year of Manufacture: 2007 Technical Data Connection Values / Power Requirements - Supply Voltage: 3 x 400 V - Compressed Air Quality: Cleaned, dried, oil-free, filtered, filter 40 um, residual moisture at 20 C less than 30% - Ambient Temperature / Humidity: +5 C to +40 C, per DIN 40040 G (annual average less than 65%, within 60 days less than 85%) - Blast Media Fill Quantity (kg): approx. 1500 - Required Dust Extraction Capacity (m3/h): 5600 Dimensions / Weights - Length (mm): 12400 - Width (mm): 3800 - Height (mm): 2300 - Weight of Heaviest Single Component (kg): 6000 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Technical data: Lifting speed: 16 - 182 m/min Stroke length: 400 mm autom. Table infeed in X/Z: 0.2 - 4.0 mm Swivel head: yes Dimensions, approx.: 1950 x 1330 x 1570 mm Weight, approx.: 1500 kg

Used, technically overhauled reinforcing steel shears. Footswitch with emergency stop function. Hydraulic counter holder Cutting capacity max.1 rod 45mm D. Power 11 KW.

Used, technically overhauled reinforcing steel bending machine. 4 pieces of counter retaining strips. 2 footswitches with emergency stop function. Max. bending capacity 1 rods 28mm D. Bending speed 6/16 revolution.min. Control with bending pins for three angles adjustable by hand. Power 3.5 KW.

Used, technically overhauled reinforcing steel bending machine. 4 pieces of counter retaining strips. 2 footswitches with emergency stop function. Max. bending power 2 rods 28mm D. Bending speed 6/13 revolution.min. Control Siemens Touch Display CC Power 4 KW.

Machine Type: Precision Cutting Machine Manufacturer: HASCO Model No.: A 190 Year of construction: approx. 1987 Condition: Very good general condition Shipping time: Immediately available Technical data Workpiece diameter: approx. Ø 0.8 – 25 mm Speed cutting spindle: approx. 8,800 rpm Cutting wheel dimensions: approx. Ø 125 × 1.5 × 20 mm Grinding spindle speed: approx. 4,400 rpm Grinding wheel dimensions: approx. Ø 100 × 50 × 20 mm Machine data Dimensions (L × W × H): approx. 1000 × 500 × 1250 mm Weight: approx. 150 kg Accessories Operating instructions Various attacks Cutting disc Grinding wheel Other accessories on request

5-axis two-spindle center with pseudo-palletization Type: DZ 24 Magnum Manufacturer: Chiron Year: 2015 Hours: 57000 Control: Siemens Sinumerik 840 D Table clamping surface 2X D 500 mm X: 830 mm Y: 630 mm Z: 630 mm A: rotating drum C: rotary tables Spindle speed: 0 - 20000 rpm Number of controlled axes: 5 No central cooling Spindle clamping cone: HSK-A63 Tool magazine: 2 x 30 positions Machine weight: 18500 kg Dimensions: 7000 x 3200 x 3500 mm BLUM aiming laser probe Chip conveyor Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: DONAU Model: DR 50 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: DMG Model: ECO 210 Year of Manufacture: 2007 Electrical Data: Voltage: 230 V Frequency: 50 Hz Power Consumption: Max. 650 VA Find more here - .ucymachines/ Contact us at - sales@ucymachines

2011 OPS Ingersoll Gantry Eagle 5 (often referred to as the Eagle G5 or Gantry Eagle 500) is a high-precision Sinker EDM (Electric Discharge Machining) machine. Feature Specification X / Y / Z Travels 525 mm / 400 mm / 450 mm Work Tank Type Drop-tank (rises/falls for easy access) Max Workpiece Weight 1,000 kg (2,205 lbs) Generator Eagle PowerSPARK (60 Amp standard, 110 Amp optional) Z-Axis Jump Speed 18 m/min (This is exceptionally fast for EDM) Find more here - .ucymachines/ Contact us at - sales@ucymachines

The Charmilles Robofil 2020 is a high-precision Wire Electrical Discharge Machine (Wire EDM). Manufactured in Switzerland, this machine is designed for detailed erosion work, making it a staple in toolmaking and the production of complex medical or industrial components. Here is a clean, structured text block for the Charmilles Robofil 2020 (1994) that you can copy and paste directly into an online listing or equipment database. --------------------------------------------------------------- Machine Specifications: Charmilles Robofil 2020 General Information - Manufacturer: Charmilles Technologies (Switzerland) - Model: Robofil 2020 - Year of Manufacture: 1994 - Machine Type: CNC Wire-Cut Electrical Discharge Machine (Wire EDM) Technical Travel & Capacity - X-Axis Travel: 320 mm (12.5) - Y-Axis Travel: 220 mm (8.6) - Z-Axis Travel: 116 mm (4.5) - U/V Axis Travel: ± 48 mm (for tap ...

Fanuc manipulatierobot die een last van 700 kg kan hanteren Het heeft een bereik van 2832 mm en is gemonteerd op een chassis van ± 18 meter.

Picot 2100 x 10 mmNumber of rolls: 3 rolls Roll capacity cold: 2100 x 10 mm Roll dia upside: Ø 240 mm Dia under roll - side rolls: Ø 180 mm Weight: 3200 kg

Manufacturer: ELB Model: Optimal 6375 Year of Manufacture: 1990 Magnet 500 x 350 mm Accesories: Coolant tank 5 grinding wheel flanges Various used grinding wheels Balancing scale with mandrel for grinding wheels Find more here - .ucymachines/ Contact us at - sales@ucymachines

Robot cell including safety enclosure and light curtain 6-axis robot HYUNDAI HH020 Transfer weight/free payload 13 kg Matrix version, material supply using matrices We currently have 2x SherpaLoader 20 in stock, e.g. built in 2018, approx. 7,500 operating hours (of which >70% is waiting time in front of the machine for the next loading request). Component dimensions Ø10 – 200 mm, length 10 – 200 mm; effective payload up to 13 kg, raw parts are supplied to this system via grid matrices. Before sale, the system will be serviced with - Software update for master control and HMI - Gear grease change on axes 1 - 6 - Encoder battery replacement on axes 1–6 and mainboard - Replacement of all energy chain cables on axes 3–6 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Control: Fanuc x-travel: 660 mmweight: 4 t: ja control: Fanuc 10 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: KAESER Model: BSD 72 SFC Year of Manufacture: 2012 Machine type: Screw Compressor Rated Power: 37.0 kW Motor Speed: 2960 1/min Max. Operating Pressure: 8.5 bar Ambient Temperature: 3 degrees C / 45 degrees C Until February 2020, this compressor was our main supplier for the system, i.e., between 500 and 700 hours per month. Since February 2020, this compressor has only been used as a backup and during maintenance of the second compressor. The compressor currently has 51,532 operating hours.

Manufacturer: Bystronic Model: BySprint Fiber 3015 Year of Manufacture: 2013 4KW Hours in picture Find more here - .ucymachines/ Contact us at - sales@ucymachines

x-travel: 4500 mmy-travel: 2000 mmz-travel: 1200 mmspindle taper: ISO 50 Cube: 2 weight of the machine ca.: 20.000 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.