other metal working machines used for sale (10,914)

length: 12,5 mmwidth: 600 mmheight over floor: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For measuring polygons with an odd number of sides. The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch teamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Image sensor 1", 6.6 megapixels, CMOS Dual telecentric lens Z-axis travel 30 mm Z-stage stage maximum load 3 kg

Zeiss UMESS 850 measuring machine

Faro Gage Plus 6-axis measuring arm Measuring arm length 4ft (approx. 1.2m) Accuracy 5+8L/1000μm with trolley, accessories and associated transport case Incl. software and operating instructions Never used/Unused - Mint

Maxi Maestro D.C Servo Drive 200 x 25/50

Siemens 6SL3120-2TE21-0AA4

Indramat DDS02 1-W150-D

Fanuc FANUC SPINDLE AMP A06B-6088-H226#H500

Fanuc A06B-6096-H105

Fanuc A06B-6096-H106

Equipment consists out of: 1 - decoiler tower with 4 decoilers gt; capacity per decoiler: 3 ton

MITUTOYO Crysta Apex CRT-A910 coordinate measuring machine was built in Japan by Mitutoyo Corporation. This extremely advanced machine, characterised by the highest accuracy and objectivity, is used for highly accurate workpiece measurements. Workpiece measurements are performed using the contact or non-contact method, which are then represented as a set of coordinate points. The use of this method makes it possible to measure parts with very complex shapes, which cannot be measured with ordinary measuring instruments. The MITUTOYO Crysta Apex CMM measuring machine is offered with a PC with software. Technical specifications of the MITUTOYO Crysta Apex CRT-A910 measuring machine - measuring range in the X/Y/Z axis: 900/1000/800 mm - measuring resolution: 0.1 µm - measuring speed: 300 mm/s - PC with software - compressed air pressure: 0.4 MPa - compressed air consumption: 50 l/m ...

A complete 3D metal printing system is available. 1) 3x 3D metal printers Markforged Metal X, year of manufacture: 2021, printing process: Metal FFF, build volume X/Y/Z: 300mm/220mm/180mm, materials: 17-4PH/H13/A2/D2/Inconel 625/Cu, max. part dimensions X/Y/Z: 250mm/183mm/150mm, max. part weight: 10kg, layer height after sintering: 50µm/125µm, machine dimensions X/Y/Z: approx. 600mm/500mm/1150mm, operating hours: approx. 3300h. 2) Sintering furnace Markforged Sinter 2, year of manufacture: 2021, solvent volume: 18356cm³, max. temperature: 1300°C, washing duration: 17h-31h, machine dimensions X/Y/Z: approx. 1200mm/700mm/1500mm, weight: approx. 350kg. 3) Solvent washing table system LÖMI EDA30 M3D, year of manufacture: 2021, batch volume: 16L, max. operating temperature: 120°C, batch chamber dimensions X/Y/Z: 200mm/216mm/380mm, machine dimensions X/Y/Z: approx. 550mm/800mm/1000mm. In ...

Qty. 1 Second-hand Shot-Blasting Line Mfc.: COGEIM – SAS Eng. Built: 2016 Dismantled and in storage Type: 4 Turbines Material to be processed: Bars’ length: min. 6.000 – Max. 12.000 mm Approximate work pieces dimensions and weight: Dimensions: round Ø 30 - 110 mm No. of simultaneously processed bars 7 up to Ø= 60 mm; 4 for bigger diameters

Hoort bij Lijn -gt; P.14d 15917

Max workpiece size 1030x800x350 mm Table size 950x630 mm Can be inspected under power

Complete Stainless Steel Cold Rolling Facility from Hyundai Steel STS Incheon  Capacity: 239.000 TPY Width: 600 – 1320 mm Stainless 304 and 430 Consists of: (2) 'Production Machinery Co.' Annealing and Pickling Lines (Lot 1) (2) 'SMS' 20-Hi ZM Cold Strip Mill (Lot 3, Lot 4) 'SMS' 2-Hi Skin Pass Mill (Lot 5) 'Production Machinery Co.'& Coil Preparation Line (Lot 6) 'Production Machinery Co.' Grinding and Polishing Line (Lot 7) 'Honda' Cut-to-Length Slitting and Shearing Line (Lot 9) 'Honda' Slitting/Recoiling Line (Lot 10) These production lines come from reputable Original Equipment Manufacturers, including two 20-Hi Sendzimir Mills originally from DEMAG-SACK, now under SMS. With a proven track record of performance and meticulous maintenance, these assets represent a remarkable investment opportunity.

Trumpf Haas HL 4006D Solid-State YAG Laser The Trumpf Haas HL 4006D is a 4000W Nd:YAG solid-state laser designed for industrial applications such as welding highly reflective materials, especially for use with robots and a range of up to 100 meters via flexible light guides. Applications Welding: The main application is welding metal parts, especially highly reflective materials such as aluminum and copper, where other lasers are difficult to use. Automated manufacturing: The laser is designed to be integrated into automated production lines with industrial robots. Precision machining: The high performance and precise beam quality enable precise work in industrial machining. Specifications Manufacturer: Trumpf Haas Type: HL 4006D Nominal laser power: 4000 W Beam quality: 25 mm.mrad Wavelength of laser light: 1064 nm Nominal voltage: 400 V Rated power:132 kW N ...

EDM machine Gantry Eagle 500 Year 2011 Travel: x/y/z = 525x400x450 Changer: 24 times Weight: 5000 kg

Tool presettler Zoller smile 400 pilot 2 BJ 2008

EDM machine Fanuc Robocut a1iB BJ 2002

EDM machine Agie Charmilles Cut e 600 BJ 2018

Table dimensions ... 2000x500mm Nominal pressing force ... 30t Slab dimensions ... 500x500mm Machine weight ... 3000kg The machine is in good condition, possible to test under power.