other metal working machines used for sale (10,814)

length:1000 mmwidth:800 mmheight:1050 mmweight:200 kgSchubladenschrank mit 5 AuszügenMit AMF Spannsystem Elementen

pulling force - max.:80 ttotal wight:26 tdimensions of the machine ca.:49 m² mtotal power requirement:85 kWworking stroke:250 mm

diameter:500 mmworkpiece weight:30 kgtest dia. min.:200 mmtotal power requirement:0,03 kWweight of the machine ca.:1000 kgdimensions of the machine ca.:1x0,5x1,06 m

measuring range X-axis:-50 . 530/830/1030 mmmeasurement range Z =:605/805/1005 mmtool taper:30 & 40 VDIcompressed air:6 bardimensions:2200 x 1200 x 2100 mmachine weight ab.:900 kgVertical Toolsetter with Cutting Edge detection via Camera System.Operating over CNC Control yb PC System or Manually, 3 axes, CNCEquipped with Modular Prescision Spindle with CNC Rotary Axis. Digital Glas Scale in all Axisand Linear Roller bearing in all Axis of the Slide Carriage.Electronic measuring equipment:PC electronics with intelligent KELCH EasyVision image processing17" TFT colour monitorOptional: second 17" TFT monitor for full screen measuring windowThe CNC Toolsetter is in good condition and ready for immediate use.

Box Width:750 Box Height:1000 dimensions of the machine ca.:1200 m2Powder Coating Line EISEMANN very less used and in very good condition. New Price of the plant 2.600.000,- EUROPower & Free conveyor system with 250 car trains, 5-Zone Spray Pre-Treatment System, stainless steel - water drying cooling zones.2 nos.of WAGNER stainless steel powder cabins each with ABB robots & double-automatic powder guns, as well aseach cabin is equipped with a hand-powder device.Powder Curing Oven, direct gas heated three-zoneSpray cleaning equipment, Stainless Steel - Sewage Treatment Plant, Evaporator with Reverse Osmosis System & Fresh-Air Device.Opening Cross Section Areal: Width 750 mm, Height 1000 mmTechnical Details: Pretreatment conveying speed 2.3 m / min.Pretreatment surface area approx. 200 m2 / h.Painting Surface approx. 120 m2 / h.Throughput of workpieces approx. 4,000 kThis Poweder Coatin ...

measuring range X-axis:150- 300 mmmeasuring range Y-axis: mmTable dimensions: mmmeasurement range Z =:450 mmenlargement:20 X fine adjustment:+/- 5 mmcompressed air:6 bardimensions:2 x 1,5 x2 mmachine weight ab.:150 kg

max. wheel diameter:275 mmgear width:58 mmmax. module:8 min. module:0,5 weight of the machine ca.:10 tmax. number of teeth:200 min. number of teeth:5

weight max.: 15 / 30 tworkpiece diameter: 600 - 6000 mmgear diameter: 500 mmturning speed drive gear steples: U/mintotal power requirement: 2,2 kWweight of the machine ca.: 1400 / 700 kgdimensions of the machine ca.: 2,5x0,9x1,00/1,50x0,7x0,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length:12192 mmwidth:2438 mmheight:2896 mmweight:4580 kgTotal weight:34000 kgcharge:29420 kgCooling ContainerInternal dimensions:Length 11585mmWidth 2290mmHeight 2545mmPallet spaces 23

plate thickness: mmsheet width: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m

weight of the machine ca.:11,2 tone spindle

tube diameter:40-90 mmwall strength:20 mmweight of the machine ca.:11 tdimensions of the machine ca.:4 x 1,6 x 1,35 mbending radius max.:270 mmThis machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure valve  ...

screw size:60 mmclosing pressure:3500 kNweight of the machine ca.:25,5 t

diameter:210 mmweight of the machine ca.:0,05 tturning speeds:4200 Bore:75 mmclamping diameter:254 mmdimensions of the machine ca.:0,6 x 0,5 x 0,4 m2-jaw power operating chuck with draw pipe and various jaw sets.

x-travel:650 mmy-travel:450 mmz-travel:420 mmcontrol:MAKINO Hyper i U-axis:± 75 mmV-axis:± 75 mmmax. size of workpiece LxWxH:1000 x 800 x 400 mmworkpiece weight:max. 1500 kgTable dimensions:910 x 710 mmweight of the machine ca.:5 tDimensions (L/W/H):3 x 3 x 2,3 mmMemory:10 GB Wire EDM in good condition.

bore capacity in steel (diameter):12 mmthroat:300 mmbore stroke:80 mmtotal power requirement:1,5 kWweight of the machine ca.:1,2 tdimensions of the machine ca.:0,6 x 0,7 x 2,1 mAppr. 100 year old column boring machine, complete overhould and ready to operate- swivel table, base table- taper tool chuck- base motor with drive belt to overhead spindle

bore capacity in steel (diameter):40 mmarm length:1250 mmworkpiece height max.:1390 mmDist. spindle nose & working surface base:350 - 1260 Spindle travel:315 max. boring diameter:40 mmDistance between spindle axis and column:350 - 1260 spindle taper:4 MKRange of spindle speeds:22,4 - 2800 Number of spindle speeds:16 Number of spindle feeds:16 Table:500 x 630 Travel of spindle head:900 mmtotal power requirement:3,5 kWdimensions of the machine ca.:2150x1070x2840 mfeed:0,09 - 1,5 m/minweight of the machine ca.:3 t

length:1600 mmwidth:1000 mmplate height:200 mmweight of the machine ca.:1 tdimensions of the machine ca.:1,6 x 1,0 x 1,3 mHardstone measuring plate with support desk and 2 tailstocks

working area:2500 mmFree moveable 6-axis measuring device- operating software- W-Lan- ball tracer

Basket size LxWxH:600 mmMax. basket weight:80 kgNo. of washing chambers:1 Temperature for washing water:60 °CElectrical heating power:4 kWtotal power requirement:5 kWLoading:Höhe bis 300 tank capacity:50 lCapacity:60 l/minMachine size LxWxH:0,75 x 1,0 x 1,2 mStainless steel high pressure cleaning machine for industrial use with basket diameter 600 mmWorkpieces will be cleaned with hot water, cleaning compound and high pressure in turnable baskets- pneumatic spring supported machine lit- stainless steel driven basket- spraying bars and pump stainless steel design- loading basket with Jog function

faceplate diameter:4000 mmswing diameter:4300 mmturning height:2500 mmmax. workpiece weight:63 ttotal power requirement:125 kWweight of the machine ca.:134 tdimensions:6100x10400x8400 mmUsed Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

Pressure:175 tchamfer lenght:4100 mmdistance between columns:3600 mmcolumn arm:410 mmram stroke speed:180 mm/secreturn speed:135 mm/secworking speed:10 mm/secwork stroke:275 mmoil volume:200 ldayligth:550 mmtable height:900 mmtable width:90 mmtotal power requirement:15 kWweight of the machine ca.:12000 kgdimensions of the machine ca.:5100 x 2150 x 2850 mm

Technical description :- RAPID ACTION DOOR - Height = 2000mm- Width = 1800mm

Technical description :- RAPID ACTION DOOR - Height = 2000mm- Width = 2000mm

DIMENSIONS / WEIGHTS:. - total height:1000 mm

x-travel:1000 mmy-travel:600 mmz-travel:550 mmfixed clamping table:1200 x 600 mmspindle drive motor:9 kWspindle taper ISO:40 spindle turning speed range:10 - 5000 U/minfeed range:2 - 6000 mm/mintotal power requirement:15 kWweight of the machine ca.:6 t

DIMENSIONS / WEIGHTS:. - total height:900 mm

turning diameter over bed:1000 mmturning diameter over slide rest:750 mmturning length:3000 mmweight of the machine ca.:12 tdimensions of the machine ca.:6x2,5x1,8 mspindle bore:110 mmturning speed range:900 U/minYear:1986 Equipment:- Coolant device- 1 static steady rest- 1 rotating steady rest- Faceplate 1.000 mm- Digital display- Rapid traverse