other metal working machines used for sale (10,776)

Manufacturer: Prima Power Model: Combo Type of Machine : Laser cutting machine Twin-tower automated sheet metal warehouse by PrimaPower - specyfikation: - Combo 1530/2 H6.3, twin-tower warehouse, height 5,970 mm - Year of manufacture 2014 - Control panel - IOW station on the Y axis with rear bumpers for material positioning on block no. 2 - Barrier system and service door for the IOW station - Double wagon on the Y axis for connecting the LD machine to the SG on block no. 1 - 38 cassettes with a load capacity of 3 tons each, sheet stack height up to 100 mm - Maximum stored material dimensions 3000 x 1500 mm. Sheet stack up to 100 mm - The warehouse is loaded with full pallets (without a wooden support) using a forklift and a forklift, or with single sheets - Two trolleys on the outfeed side deliver material to connected devices. The trolley with a further outfeed run ...

0: , St.Width: 1080 mmLength: 2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 610 mmy-travel: 455 mmz-travel: 520 mmweight of the machine ca.: 3,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WAFIOS CNC winding and bending machine Type FTU5.3-98 Year of manuf. 1994 with additional bending head, servo motor and straightening rollers for diameters from 2 mm to 12 mm WAFIOS CNC winding and bending machine Type FTU5.3-98 Built in 1994 with additional bending head, servo motor and straightening rollers for diameters from 2 mm to 12 mm

Number of working hours: 2633 hweight max.: 8 tweight of the machine ca.: 13280 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Kuhlmeyer Model: Double Sandbelt Machine Year of Manufacture: 2019 Condition: Fully Operational Technical Specifications Overall dimensions (L × W × H): approx. 4400 × 2400 × 2450 mm Weight: approx. 2000 kg Connected load: 6 kW Main power protection: 20 A Rated voltage: 400 V, 50 Hz, 3P/PE Control voltage: 24 V DC Protection standard: EN 60204 Compressed air pressure (pneumatics): 6.0 bar Compressed air consumption: 0.1 Nm³/h Dust extraction capacity: 3391 m³/h Air speed: 30 m/s Effective working width: 2700 mm Sanding belt size: 100 × 8340 mm Maximum workpiece weight on machine: max. 50 kg (depending on size, number of vacuum clamps, and machining position) Maximum workpiece weight on infeed table: max. 100 kg (flat position) Mounting drawing number: ENG-026696 --------------------------------------------------------------- Environmental Cond ...

Manufacturer: Eckert Model: Jantar Year of Manufacture:2010 Table size: 3x6 meters 2 Hypertherm XPR 120A high-definition plasma cutting heads Pipe cutting attachment Exhaustor system One plasma source has had parts removed and requires replacement components. The machine is fully operational with one cutting head. Find more here - .ucymachines/ Contact us at - sales@ucymachines

x-travel: 550 mmy-travel: 320 mmz-travel: 420 mmb-axis: -45 / +180 °c-axis: 360 ° 0Control: SIEMENS 840D SL spindle taper: A-50 spindle turning speed - stepless: 12000 U/mintools in tool magazin: 64 total power requirement: 36 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 3 x 5 x 3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We are offering a fully equipped machine workshop for sale, which includes the following equipment: 1. Machinery - MIKRON VCE 800 Pro Machining Center - LAGUN FCM 152 Milling Machine - CMZ TBI-450 CNC Lathe - PINACHO A 70 Conventional Lathe - PUSKAS PKM 10-S-500 Compressor - PUSKAS PLX-9 Dryer - SUPERLEMA Ø200 Grinder - CDM 210 Horizontal Bandsaw 2. Tools - HSS Drill Bits Ø1 to Ø35 - MD Drill Bits Ø1.5 to Ø20 - HSS Reamers Ø3 to Ø25 - Coated HSS Milling Cutters Ø2.5 to Ø25 - MD Milling Cutters Ø1 to Ø20 - D’ANDREA Boring Heads – Precision 0.002 mm (2 units) - Planer and Squaring Chucks Ø12 to Ø80 - Tool Holders for CNC & Conventional Lathes - Milling and Turning Inserts - Metric & Whitworth Thread Taps and Dies 3. Clamping Systems - ARNOLD MB 125 Vises – Precision-Ground (2 units) - ISO 40 Taper Collet Holders (DIN 69871) - ISO 40 Chuck Holders - Weldon System IS ...

Manufacturer: FINN Model: POWER LP6 Year of Manufacture: 2007 Working hours: 21,500 available : immediately Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: MITSUBISHI Model: Laser Cutting Machine Year of Manufacture: 2017 3000×1500 mm Power: 2.7kw Technology: Co2 2 changing tables AVAILABLE: immediately Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: FINN POWER Model: LPe5 Year of Manufacture: 2002 Work area: 2500×1250 mm (+ repositioning) AVAILABLE: immediately Find more here - .ucymachines/ Contact us at - sales@ucymachines

power capacity: . kWtool adaptor: . total power requirement: . kWMilling head BFT Burzoi 0038 PUN 181-187The tech. Data are manufacturer oroperator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: . kgwarranty: . MonDimensions (HxWxD): . mmtemperature: -50.0 to 1600 °CThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.