other metal working machines used for sale (10,781)

measuring range X-axis: 330 mmmeasuring range Y-axis: 400 mmspindle taper: SK 40/50 dimensions of the machine ca.: 1080 x 660 x 1080 mmxmmxmmweight: 175 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rockwell hardness: . brinell hardness: . weight: kgdimensions: mmHardness tester Rockwell measurementwith underframe table all technical data without guaranteeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bar diameter min./max.: 5mm/102mm, bar length min./max.: 150mm/1200mm, machine length: approx. 1950mm, machine width: approx. 950mm, machine height: spindle height+345mm, machine weight: approx. 450kg. Documentation available. On-site inspection is possible.

Gewinde-Ø: 52 mmthreading length: 500 mmthread pitch: entsprechend Hohlspindel -Ø: 54 mmspindle turning speed range: 25 - 140 U/minturning speeds:: 6 Stufenvoltage: 380 V / 50 Hzmain drive motor: 3 kWtotal power requirement: 4,5 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 1,0 x 1,8 x 1,4 m• with pneumatic workpiece clamping,• threading head Z 52,• cooling device,• 2 sets of chaser holder,size: Z52/2B, + 21B• 5 sets of chaser jaws,pitch 1 - 2,5 mmMachine is in a good condition.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible.

Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Manufacturer: Cleveland Model: GAPU-5 A/M Diamond Discs: - Maximum Diameter: 200 mm - Minimum Diameter: 180 mm - Maximum Width (with double disc): 100 mm Note: The supplied grinding wheel guard is designed for a maximum diameter of 200 mm and a minimum diameter of 180 mm. Workpiece Spindle: - Speed Range: 400 – 4500 rpm Planing Unit: - Swivel Range: 190° - Oscillation Stroke: 70 mm - Oscillation Speed: Infinitely adjustable - Spindle Speed: 1400 or 2800 rpm Planing Grinding Disc: - Diameter: 200 mm - Width: 20 mm - Bore Diameter: 32 mm Machine Dimensions: - Length: 1250 mm - Width: 1000 mm - Height: 1100 mm - Weight: 450 kg Noise Emission: - Standard Operating Sound Level: 83 dB(A) - May be lower in individual cases Find more here - .ucymachines/ Contact us at - sales@ucymachines

Rail system for workpieces up to (as desired) 4m long and weighing 100kg Complete delivery, since 2010 in the DACH region Next reference page near you see PDF with all the details, see video Powder furnace, extraction stand for coating on both sides, can be upgraded with automatic coating equipment, be it Gema or Wagner Pow C EQ = Powder Coating Equipment We will respond to your inquiry immediately

Rail system for workpieces up to (as desired) 4m long and weighing 100kg Complete delivery, since 2010 in the DACH region Next reference page near you see PDF with all the details, see video Powder furnace, extraction stand for coating on both sides, can be upgraded with automatic coating equipment, be it Gema or Wagner Pow C EQ = Powder Coating Equipment We will respond to your inquiry immediately

For the automatic powder plant, conveys powder coating up to 20m in an even and 8kg quantity PDF with all details available, see also powceq com

Complete professional powder coating plant in excellent condition, available from today. 00000 00000 00000 Turnkey delivery, we take care of all the work Control units from Gema We will respond to your inquiry immediately with all the details. Smooth processing, since 2010 With plastic booths, powder center, pump delivery, automatic guns, visual controls from Siemens Simatec 3D scanners, according to the latest technology... and of course pre-treatment with nano-coating Drive only e.g. 2 hours and look at a reference plant, one of many in the DACH region (since 2010) Contact us now, it's worth asking See PDF for all details powceq com (project page) , see also video here

Tank capacity: 775l, max. batch weight: 100kg, heating capacity: 26kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660mm/480mm/338mm, fine filtration tank 1/2: 100µm/50µm. Machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 950kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling and oil separation with coalescence separation unit and oil collection container. Documentation available. On-site inspection is possible.

A complete bulk powder coating system MEEH powder coating and dust filter system is available. Product dimensions X/Y/Z: 8000mm/800mm/3000mm, max. product weight: 1000kg, total surface area of all openings: 12.9m², max. permissible powder injection quantity: 90kg/h, extraction capacity: 18000m³/h, total system dimensions X/Y/Z: approx. 28m/13m/6m, compressed air requirement: approx. 38nm³/h, compressed air: 8bar, connected load: approx. 30kW. 1) Manual powder stand with suction, internal dimensions X/Y/Z: 10m/3m/4m, external dimensions X/Y/Z: 10040mm/3370mm/4600mm. 2) Chamber dryer MEEH KTÖ240, year of construction: 2008, air capacity: 30000m³/h, heat output: 240kW, burner: Weishaupt, burner year of construction: 2019, fuel: heating oil, internal furnace dimensions X/Y/Z: approx. 8530mm/4610mm/5840mm, external furnace dimensions X/Y/Z: approx. 8200mm/3500mm/4000mm. 3) Lifting and lo ...

Key data: 1140 °C

Continious Brazing/Sintering furnace manufactured by Mahler. Type: Humpback (lower H2 consumption). Belt width: 450mm Clearance above belt: 200 mm Heating length: 5000mm Gross throughput: 600 kg/h Electric heating power: 198 kW Service temperature: 1140 Adjustable range of belt speed: 100-1000 mm/min Temperature cotroul groups: 5x Total length: 30m width: 1,8m height: 2,8m Hydrogen connection: 0,1bar 30Nm3/h (type 3.0) Nitrogen connection: 0,1 bar 60 Nm3/h (type 5.0) Exhaust gas : 300 m3/h Furnace is in use, and was regularly serviced. In 12. 2024 brick lining, heating elements, thermocouples, mesh belt and muffle was replaced . Spare parts are available, in case of interest, can be subject of seperate agreement. Offer includes: - Water cooling system with glicol base heat exchanger - Exhaust tubes (2x around 5m Stainless steel) - 5x sensor system to detect ex ...

Key data: 1470 mm, 1400 mm, 750 mm

2 Cast iron V supports Width: 1400 mm Height: 1370 mm Base depth: 750 mm Slot width: 200 mm V width: 940 mm V depth: 430 mm Total height under sole: 1470 mm Weight: 2,3 T / unit

A Niehoff slide-free drawing machine is available. Processing diameter: 5mm-15mm, drawing speed range: 6m/min-24m/min, gearbox: manual gearbox, machine dimensions X/Y/Z: approx. 2600mm/2200mm/4000mm, weight: approx. 6500kg. The gearbox was completely overhauled in 2019 with new gears and new bearings. A new external lubricating oil pump was also installed in the same year. Documentation available. On-site inspection is possible.

Machine Type: Turning Machine Model: Sprint 50 2T Manufacturer: DMG MORI Year of Manufacture: 2017 Specifications: - Spindle Speed (Max): - 1st Spindle: 7000 rpm - 2nd Spindle: 7000 rpm - Machine Weight: 9200 kg Electrical Specifications: - Power: 54 kVA - Current (Max): 135 A - Fuse Rating: 160 A - Voltage: - Main: 400 V ±10% - Auxiliary AC: 230 V - Auxiliary DC: 24 V - Frequency: 50 Hz Accessories/extras: CT-20D Hinge Belt chip extractor 2 pcs Sauter turret head Typ. Grip main spindle SPANNTOP mini 65 Grip counter spindle SPANNTOP mini 52 Unloading system Marposs TT30 tool setting system Artis CTM V6 tool wear and breakage monitoring system LNS Alpha 552 - 4 meter bar feeder Find more here - .ucymachines/ Contact us at - sales@ucymachines

X,Y travel: 14.6" x U,V,Z Travel: 3.9" x 3.9" x 10.2" Max. workpiece size: 29.5" x 21.7" x 10.2" Max. workpiece weight: 880 LB Max. X, Y rapid traverse: 31.5 in/min Motor Drive System AC Servo Motor/Linear Motor Wire Diameter: 0.004" – 0.012" Max. wire feed: 11.8 in/s Wire tension: 0.44 – 5.52 lb taper angle : ±21°/4.33 inches (DA+DB=0.6 inches) Layout (W x D x H) 90.6" x 89.2" x 80.6

Key data: 200 kN, 1600 mm

We are selling our SSIA 20/1600 broaching machine, which we are currently still using in production. The machine has a pulling force of 20,000 kg and a broaching length of 1,600 mm.

Surface Grinding Machine Manufacturer: Jung Type: JA 500 CNC-C Year of Make: 1995 Overhauled in: 2003 Grinding length: 500 mm Grinding width: 200 mm Max. workpiece height: 250 mm Table dimensions X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Speed: 4,200 rpm Machine weight: approx. 2,500 kg

Various metalworking machines are available. 1) Larger BBM guillotine shears, year of manufacture: 1995. 2) Nimak spot welding machine, year of manufacture: 1990s. 3) Roundel machine Schwartmanns, year of manufacture: 1987. 4) Smaller lathe Weiler, year of manufacture: 1966. 5) Table-top stud welder Soyer, year of manufacture: 2000s. 6) Freestanding grinding motor. 7) KSM deburring machine, year of manufacture: 1980s. 8) Larger Tox hydraulic stamping press, year of manufacture: 1990. 9) TES 15 hydraulic press, year of manufacture: 1972. 10) Single-column table press, year of manufacture: 1955. 11) Landert honing machine. On-site inspection is possible.

- Power consumption: 26 kVA 3P400V /N/PE/50HZ; Fuse 63A - Compressed air connection: min. 5bar, max. 7bar - Extraction capacity: min. V = 1700 m³/h at Δp = -850 Pa min. 20 m/s, run-on time 15s The plant was cleaned, packed by the manufacturer, preserved and stored. It is complete and ready for operation. The facility can be visited at any time, by appointment.

Key data: 450 mm, 320 mm, 162 mm

For sale Charmilles wire EDM machine type Robofil 4020.1. The machine is in very good condition. Still to be seen under power. Lots of accessories!

power capacity: 63 / 93 kWvolt: 380 Vampere: 122 / 178 Aweight of the machine ca.: 0,5 tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. bar length 1,500 mm Bar diameter 4 – 85 mm Weight approx. 400 kg UNUSED!

WWM TS 560/8-1 wire drawing machine was built in 2014 in Italy by WWM Technology Srl (now EJP Italmec Sp. z o.o.). The machine is used in the process of reducing the diameter of various types of wire by pulling it through a series of rollers. Once reduced to the appropriate diameter, the wire is confectioned directly onto a carousel or stand. The wire drawing line consists of the following machines: 1. WWM TS 560/8-1 wire drawing machine 2. WWM SV5 vertical static wire pay-off 3. WWM DSM 01 mechanical descaler 4. WWM AF 1000 wire coiler Wire feeding precision is ensured by the WWM wire pay-off, which consists of two tilting drums and a central column. It enables easy loading of material coils weighing a maximum of 3000 kg each, without stopping the drawing machine. During threading, the sheave and basket are lowered by a hoist with AC motor. The scale on the entire surface of t ...

ITALMEC TSR 300/1+6 wire drawing line was built in 2020 in Poland by EJP Italmec Sp. z o.o. The purpose of the line is to reduce the diameter of various types of wire, i.e. steel wire or welding wire, by pulling it through a series of rollers. This process is performed fully automatically, thanks to the use of two additional devices – a wire pay-off and a wire coiler. The wire drawing line consists of the following parts: 1. ITALMEC TSR 300/1+6 wire drawing machine 2. ITALMEC SB2C vertical static wire pay-off with compensator 3. ITALMEC AHSC 30 horizontal static wire coiler The ITALMEC wire pay-off with rotating arm precisely unwinds material from spools, coils or racks towards the drawing machine without stopping it. It is equipped with a special device that stops the machine in case of wire breakage and a compensator that accumulates the amount of wire necessary to stop the  ...

A coolant separator is available. Volume flow: 4000m³/h, total pressure: 2000Pa, power: 4kW, connection diameter: 75mm, material: stainless steel. Documentation available. On-site inspection is possible.

Spindle diameter 135 mm Morse 6 Attachment Cone Max. drilling depth in 1 pass 600 mm Min. distance spindle-column axis 485 mm Max. distance between spindle and mast axis 3,500 mm Min. distance from spindle to table 520 mm Max. distance from spindle to table 1,845 Min distance from spindle to plate - base 1,130 mm Max. distance from spindle to plate - base 2,455 mm Min drilling radius from column axis 820 mm Max. drilling radius from column axis 3,875 mm Max. drilling diameter 78 mm stroke 8,000mm stolle top 10.000X2.500mm

Key data: 28 kVA

Dismantled and stored induction hardening system from Steremat Elektrowärme GmbH type EA 15DA-2C-HF turntable with 50 magnetic workpiece holders and a manual workstation, generator from ELDEC type: HFG 15 DA, HF power 15KW, power consumption at full load 18 KVA, frequency range 150 - 350 kHZ