other metal working machines used for sale (10,797)

This 3-axis ONA AE600 Wire EDM machine was manufactured in 2007. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine can accommodate workpieces up to 1,300 mm in length, 1,040 mm in width, and 500 mm in height, with a maximum weight of 5,000 kg. If you are looking to get high-quality wire capabilities, consider the ONA AE600 machine we have for sale. Contact us for further details.

This 3-axis ONA NX7 die-sinking EDM machine was manufactured in 2007. It features an X-axis travel of 1,500 mm, Y-axis travel of 750 mm, and Z-axis travel of 650 mm. The machine has a robust table size of 1,700 × 1,000 mm and can accommodate a maximum workpiece weight of 10,000 kg. If you are looking to get high-quality die-sinking capabilities, consider the ONA NX7 machine we have for sale. Contact us for further details.

Manufacturer: Samag Model: MFZ 2-2 Units Available: 3 Years of Manufacture: 2006, 2007, and 2003 Technical Specifications: - Total weight: 24,000 kg (per nameplate); general weight 22,000 kg, comprising base machine 20,000 kg, empty clean water tank 930 kg, and empty chip conveyor 450 kg - Dimensions with coolant tank and chip conveyor: 5.50 x 6.00 x 3 m - Dimensions during maintenance: 6.00 x 6.50 x 3 m - Connection power: 72 kVA / 72 kW - Mains voltage: 3 x 400 V AC, plus or minus 10 percent - Frequency: 50 Hz - Control voltage: 230 V AC / 24 V DC - Fuse protection ahead of main switch: 3 x 160 A - Numerical control: manufacturer Indromat type MTC200 - Operating panel: main control panel consisting of flat control panel BTV 20.3, machine control panel BTM 16.2, and CNC full keyboard VAK 40.1, with workpiece loading station at the right operating panel - Pneumatic operating pressur ...

gt;gt; Esab A6 GMD lasnaad volgsysteem De A6 GMD lasnaad volginrichting wordt gebruikt voor het positioneren en volgen van lasnaden van automatische lasmachines met alle soorten lasnaden waarbij een geleidingsrand aanwezig is die de sensorvinger kan volgen. De inrichting is ontworpen voor standaard ESAB-geleidingen en kan één of twee servomotoren tegelijk aansturen. gt;gt; Esab LAE 800 amp DC-bron De LAE-serie bestaat uit driefasige, ventilatorgekoelde DC-lasstroombronnen die zijn ontworpen voor zeer productief gemechaniseerd poederdek lassen of zeer productief MIG/MAG-booglassen. De toepassing betreft poederdek lassen. Het apparaat is verplaatsbaar op rails. 18 meter lengte beweging Afmetingen van de kraan zelf: 2800 x 2600 x 3300 mm

gt;gt; Esab A2-A6 procescontroller Selecteerbaar lasproces met vooraf ingestelde lasparameters (geheugen voor 255 parameterreeksen). Constante stroomsterkte of constante draadsnelheid. Zeer gebruiksvriendelijk. gt;gt; Esab LAF 800 amp DC-bron De LAF-serie bestaat uit driefasige, ventilatorgekoelde DC-lasstroombronnen die zijn ontworpen voor zeer productief gemechaniseerd poededek lassen of zeer productief MIG/MAG-booglassen. De toepassing betreft poederdek lassen. Het apparaat is verplaatsbaar op rails. 16 meter lengte beweging Afmetingen van de kraan zelf: 3200 x 2300 x 4000 mm

Lasrookafzuiginstallatie die kan worden aangesloten op de afzuigbuizen in uw gebouw. Type: WD 40-20

Industriële trailer die met een vorkheftruck verplaatst moet worden.Kind off: industrial trailer Number of axles: 1 axle Loading capacity: 30 ton Length: 10 meter Breadth: 1300 mm

Industriële trailer die met een vorkheftruck verplaatst moet worden.Kind off: industrial trailer Number of axles: 1 axle Loading capacity: 30 ton Length: 10 meter Breadth: 1300 mm

Industriële trailer die met een vorkheftruck verplaatst moet worden.Kind off: industrial trailer Number of axles: 1 axle Loading capacity: 30 ton Length: 10 meter Breadth: 1300 mm

Progres Ø 420 x 2000 mmDistance between centers: 2000 mm Swing over bed: 420 mm Swing over cross-slide: 240 mm Diametre of main spindle bore: 62 mm Number of speeds: 23 > 1050 rpm

Technical details Manufacturer: AGIE Model: AGIECUT 200 Control system: AGIEMATIC-C Type: CNC wire EDM machine Configuration: - CNC wire electrical discharge machining system - Dielectric work tank - Automatic wire feed system - Wire handling mechanism - AGIEMATIC-C CNC control cabinet - Separate electrical cabinet - Enclosed machining area Application: - Precision machining of electrically conductive materials - Tool and die manufacturing - Mould production - Precision profile cutting Construction: - CNC-controlled wire EDM technology - Integrated dielectric tank - Automatic wire transport system Dimensions: - Length: Approx. 2600 mm - Width: Approx. 2200 mm - Height: Approx. 2450 mm Weight: Approx. 3900 kg Condition: Used Observed condition: - Machine structure appears complete - Original AGIEMATIC-C control cabinet installed - Working tank intact - Column and cutting head installed -  ...

BÜHLER ECOLINE S PRO 34 die casting machine was built in 2018 in Switzerland by Bühler AG. The machine was used occasionally and is in very good technical condition. The BÜHLER ECOLINE S PRO 34 is designed for the die-casting of aluminium alloy components. It enables the efficient, mass production of aluminium castings used, among others, in the automotive, electronics and machinery industries. In the die-casting process, liquid aluminium is injected under high pressure into a closed die. Once the die is filled, the material cools and precisely takes on the die’s shape. The combination of this technology with a high clamping force of 336 tonnes enables the production of repeatable castings with even the most complex geometries. The BÜHLER ECOLINE cold-chamber die-casting machine is part of a complete production line designed for aluminium die-casting. It includes an ABSOLENT  ...

CNC vertical machining center Type: DNM 500 Manufacturer: Doosan Year: 2018 Spindle overhauled in 2023 Control: Siemens Sinumerik 828 D X: 1020 mm Y: 540 mm Z: 510 mm Spindle speed: 10000 rpm Spindle taper: BT 40 Table: 1200 x 540 mm Max table load: 800 kg Tool magazine 32 positions Machine dimensions: 3000 x 2550 x 2740 mm Machine weight: 6500 kg Tool probe Work probe Chip conveyor Tool holders Machine in good condition, under power. Find more here - .ucymachines/ Contact us at - sales@ucymachines

CNC press brake Type: CNC HAP 1270x35 Manufacturer: Ermaksan Year: 2007 Control: Delem ER 70 3 controlled axes Pressing force: 35 t Working length: 1270 mm Motor: 5.5 kW Tension: 380 V Machine weight: 2800 kg Dimensions: 2150x1550x2150 mm Tools included Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: STM Model: 4020 PremiumCut Type of Machine: Waterjet Cutting System Year of Manufacture: 2013 Condition: Used, Fully Functional Operating Hours: approx. 10,700 h Technical Specifications: - Effective cutting area: 4000 x 2000 mm - Heavy duty slats for workpieces up to 1,000 kg per square metre - CNC control NUM Axium Power, up to 30 m per minute - Z-axis CNC clearance height: 180 mm - Control cabinet: Premium console - Waterjet software: SmartCut - Computer with 20 inch LED monitor and splash-proof keyboard and mouse Main Components and Their Function: - Waterjet cutting valve - Abrasive cutting head - Positioning laser - Abrasive metering unit, CNC controlled, with intermediate container - Abrasive supply container, 250 kg - Abrasive minihopper system with pressure container - Double cable pull system to secure the working area - Automatic Abrasive Rinsing System: ...

Manufacturer: Kemmerich Model: VD 3000 UF-SH-520-S Type of Machine: Double Decoiling Reel / Uncoiler Year of Manufacture: 1999 Technical Specifications: - Band width: 100 to 520 mm - Band thickness: 0.5 to 2.5 mm - Maximum coil weight: 3,000 kg - Spreading range diameter: 470 to 520 mm - Maximum coil outer diameter: 1,600 mm - Maximum band speed: 25 metres per minute - Reel crown rotation speed: 1 to 15 rpm - Drive power: 2.6 kW - Connection voltage: 480 V AC, 60 Hz - Rated current: 16 A - Control voltage: 24 V DC - Cross shaft height: approximately 1,250 mm - Maximum load capacity per nameplate: 3,000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

CNC vertical machining center Type: VF-3 Manufacturer: Haas Year: 2019 Control: Haas Hours: 6932 X: 1016 mm Y: 508 mm Z: 635 mm Table: 1219 x 457 mm Spindle cone: SK40 Through-Spindle Coolant (TSC) Renishaw Wireless Intuitive Probing System A wide range of SK40 tool holders (collet, Weldon, etc.). Cutting tools (milling cutters, drills, taps). Clamping equipment (machine vices and table accessories). Arbors and clamps with ISO 40 / SK40 clamping cone from SCHUNK Intec Machine vices, chucks, clamping elements and inserts Probe tips with ruby ​​ball Milling cutters, taps, drills, reamers from HG Technology, PM-Tech, Guhring, ISCAR... Chip conveyor Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Year: 2003 - technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed - variable milling angles - turret stop for milling depth adjustment - cooling system - quick cutter change system

CONTROLS  CNC controls TECHNICAL SPECIFICATION  current generation (max): 3600 A  Table-size         : 660 mm  Table-size         : 540 mm  Working head: electr.clamping surf.: 375 mm  .. x: 545 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 2200 mm  space requirements -front/back-: 2560 mm  total height: 2870 mmThe precision electrochemical metal machining (PECM) process is the further development of electrochemical countersinking. High-precision tools can also be machined from super alloys (Inconel, Hastelloy, etc.) and PM steels without process-related tool wear.Natural granite machine frameWorking area 800 mm x 640 mm (W x D)Machine table 660 mm x 540 mm (W x D)Maintenance-free precision work axis with direct driveFixture attachment via 6 T-slot rails (M10) in the machine tableReal-time system for process control and short-circuit detecti ...

Metal 3D printer manufactured in 2017. This TRUMPF TruPrint 3000 features a build volume of Ø 300 mm x 400 mm and is equipped with a 500 W fiber laser. It offers high-speed and high-density build rates, making it suitable for various applications. If you are looking to get high-quality metal printing capabilities, consider the TRUMPF TruPrint 3000 machine we have for sale. Contact us for further details regarding this machine.

Robotic Brushing Cabin manufactured in 2015. This M.A.I. ASD 1 features a KUKA 6-axis industrial robot arm and a Siemens SIMATIC Touch Panel for intuitive control. It includes a mobile Ruwac industrial dust extraction system and a central vertical clamping fixture for workpiece positioning. With comprehensive safety features such as a fully enclosed booth and emergency stop controls, this machine ensures a secure working environment. If you are looking to get high-quality brushing capabilities, consider the M.A.I. ASD 1 machine we have for sale. Contact us for further details.

- Optional Box table 800 x 500 x 5000 mm- Tailstock swivable for accurate drilling

Set of four TESA Twin-Cal IP67 digital calipers for mechanical workshop dimensional control operations, CNC machining, industrial maintenance, precision manufacturing and metrology. These professional instruments allow the measurement of thicknesses, inner and outer diameters, depths and lengths with direct digital reading. The IP67 protection makes them suitable for use in industrial environments. Ideal set for machine shops, quality departments, maintenance or metrology equipment dealers. Auction-ID: A1-48554-1002

Please also take a look at the attached PDF documents (Drawing and technical details) Auction-ID: A7-49415-1

0-10 mm precision dial gauge with 0.01 mm accuracy, complete with magnetic base. This set is designed for extremely precise control of the geometric shapes of various components and to ensure their correct positioning within other components. Auction-ID: A7-49495-253

3-D coordinate measuring machine Measuring range X/Y/Z: 440 x 500 x 410 mm Measurement uncertainty X/Y/Z: 2.5 + 3.9L/1000 μm Max. table load: 227 kg Total weight 293 kg

LANG Clamping Tower 70850 with Grid Plates 75710 and Axle Tensioner 48155-125 2 towers with plates and axle clamps are available! A high-quality LANG clamping tower 70850 with matching grid plates 75710 and axle clamp 48155-125 is offered. The clamping system is ideal for precise and efficient 5-axis machining as well as multi-sided machining on CNC machining centers. Technical data: Manufacturer: LANG Technik Type: Tensioning Tower 70850 Accessories: 8 x grid plate 75710 Clamping system with grid hole High repeatability Robust design for industrial use Ideal for automated production and set-up time optimization Condition: Used, technically perfect. Normal signs of wear according to age and area of use. Scope of delivery: 1 x LANG Tensioning Tower 70850 8 x LANG Grid Plates 75710 4x Axle Clamp 48155-125 The clamping tower allows optimal use of the machine wo ...

Key data: 1150 °C, 260 mm, 500 mm

Manufacturer: W.C. Heraeus Hanau Type: KR 260 Machine Type: Electric Chamber Furnace/Laboratory Furnace/Heat Treatment Furnace For sale is a high-quality industrial furnace from the renowned manufacturer W.C. Heraeus Hanau, model KR 260. The furnace is ideal for heat treatment processes, annealing, material testing, laboratory applications, and research and development tasks. Features: Robust industrial design Electrically heated chamber furnace Uniform temperature distribution Temperature control for precise processes Ideal for laboratory, workshop, industry and research Solid German quality production Max. temperature: 1150°C Voltage: 330V 50Hz Power: 11.4kW; 20A Areas of application: Heat treatment of metals Annealing and hardening Material tests Ceramic and laboratory applications Research and development Interior chamber dimensions: B260 H180 T500

Key data: 250 °C, 700 mm, 700 mm

Manufacturer: David + Baader, Kandel Type: 10880.3 Machine Type: Industrial Furnace/Chamber Furnace/Heat Treatment Furnace For sale is a used industrial furnace from the manufacturer David + Baader Kandel, type 10880.3. The furnace is suitable for a wide range of applications in industry, trade, laboratories and workshops and is ideal for heat treatment, drying or annealing processes. Technical data Manufacturer: David + Baader Kandel Type: 10880.3 Type: Electric chamber furnace Condition: Used Further technical data on request or according to the nameplate Features and benefits Robust industrial design Uniform heat distribution Reliable temperature control Stable furnace chamber Suitable for continuous operation Proven German quality Possible areas of application Heat treatment of metal parts Annealing and tempering work Drying processes Laboratory and testing ...

Key data: 300 °C, 1000 mm, 800 mm

Technical data Manufacturer: Steel Type: 8220 Type: Industrial Furnace / Chamber Furnace Condition: Used Other technical data according to the nameplate Facilities Robust and durable construction Electric heating Temperature control for precise processes Good heat distribution in the working area Suitable for professional use Areas of application Heat treatment of metal parts Annealing and tempering Drying processes Preheating of workpieces Laboratory and testing applications Research and development Interior chamber dimensions: B1000 H1000 T800