other metal working machines used for sale (11,284)

We are offering a complete Water-Cooled Induction Leveling System, composed of the following components: 1. Electrical Power Unit - Power Supply: 3 x 400V, 50/60 Hz - Current (In): 50 A - Short-Circuit Current (Icc): 35 kA - Item: 01 - Type: IFC/A-25 (25 kW / 20 kHz) - Year: 2023 2. Inductor Unit - Manufacturer: ATE - Drawing: 239003100_0 - Item: 03 - Year: 2023 - Type: INDUKTOR RECHTS (Right Inductor) 3. Chiller Unit - Manufacturer: M.T.A - Model: TAEevo TECH 051 - Production Year: 2023 - Voltage: 400V / 3Ph / 50 Hz - Power Consumption: 8.8 kW - Current: 10 A - Protection Class: IP54 - Refrigerant: R410A - Charge: 2.088 kg - Global Warming Potential (GWP): 2088 - Cooling Capacity: 32.0 kW (EWT 20°C, LWT 15°C) - Water Flow Rate: 5.5 m³/h - Water Connections: 1 1/4" - Weight: 239 kg Find more here - / Contact us at -

Qty. 1 Second-hand shredder Mfc.: METSO Denmark A/S Model: M&J Eta PreShred 4000S Built: 2013 Condition very good Working hours: 11,347 Power supply: Voltage 400 V AC, 50 Hz Main motor: 2 X 200 kW Rated current 760 A Main motor, full load current 2 x 341 Amp., PLC controller Drive principle, hydrostatic transmission with power consumption limiter. Working cutting cassette: 2 shafts Operating asynchronously Speed: 33 rpm Number of rotary knives: 2 x 12 pieces Number of lower, fixed knives 2 x 24 pieces Bearings 2 x 2 barrel

ADCOLE 1200 SH cylindrical coordinate measuring machine was built in 1990 in the United States by ADCOLE CORPORATION. The machine is used for measuring tight tolerances on camshafts, crankshafts and other cylindrical parts. The patented laser interferometer technology ensures the realisation of precise radial measurements with an accuracy of up to 0.5 μm. The ADCOLE Model 1200 coordinate measuring machine, including all components, weighs 5325 kg. Technical specifications of the ADCOLE 1200 SH crankshaft and camshaft measuring machine - machine dimensions (L x W x H): 1075 x 1195 x 2890 mm - peripheral table dimensions (L x W x H): 715 x 465 x 825 mm - control cabinet dimensions (L x W x H): 800 x 800 x 1800-2000 mm - machine weight: 3525 kg - total weight of the machine including all components: 5325 kg

GEKA HYDRACROP 55/S hydraulic ironworker machine was built in 2018 in Spain by MAQUINARIA GEKA S.A. The machine, equipped with 5 work stations, is designed for precision machining of flat bars and angle bars. Each station is controlled by two hydraulic cylinders, which give the possibility to work independently or in parallel on two stations simultaneously. The GEKA HYD 55 S ironworker machine weighs 1390 kg. Technical specifications of the GEKA HYDRACROP 55/S ironworker machine General data - maximum punching force: 55 t - maximum cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - engine power: 5 kW - weight of the GEKA HYDRACROP 55/S machine: 1390 kg Flat bar shearing station - flat bar dimensions: 300 x 15 mm; 200 x 20 mm - blade length: 305 mm - working height: 880 mm Angle bar shearing station - shearing of angle bar at 90°: 12 ...

serial number: B024D04184T fork length: 1050- 1220 mmweight: 9640 kgsize of tire: 28 x 12 x 22 size of tire: hinten 22 x 8 x 16 : 70 % height of stroke: 4600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3 : 900 mm centre distance: 2x 4mm mmDistance between centres: 1x 5 mm mmcapacity: 600 kp : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 7175455 : 3 Backenfutter Durchm. 30 tool taper: ja turret head: für 6-fach-Belegung centre distance: ca. 700 mmturning diameter: max. ca. 450 mmControl: FANUC dimensions of the machine ca.: 3.000 x 2.000 x 2.200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 / 20 (einzeln / Satz) tworkpiece diameter: Ø250 - Ø4600 mmgear diameter: 380 mmturning speed drive gear steples: 130 x 1300 mm/mintotal power requirement: 2x 0,75 kWweight of the machine ca.: 750 kg / 500 kgdimensions of the machine ca.: mmSteel rollers, dia. 380 mmIdle rollers with motor driven displacement of rollersContinously variable speed of drive rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece weight per basket: 250 kgbasket dimensions: max. mmvoltage: pneumatisch weight of the machine ca.: 400 kgdimensions of the machine ca.: 1,35 x 1,50 x 2,35 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Demag Mannesmann 6,3 ton x 11 410 mmKind of: overhead travelling crane Capacity: 6,3 ton Span: 11 410 mm Tackle speed: 1 & 6,3 m/min Rotationspeed: 5 & 20 m/min Displacementspeed: 10 & 40 m/min Radiocontrol: no radio control Numbre of riggers : double rigger

Demag 5 ton x 15 100 mmKind of: overhead travelling crane Capacity: 5 ton Span: 15 100 mm Radiocontrol: no radio control Numbre of riggers : double rigger

Demag 6,3 ton x 15 100 mmKind of: overhead travelling crane Capacity: 6,3 ton Span: 15 100 mm Radiocontrol: no radio control Numbre of riggers : double rigger

Inv. Num. : 8364 Type: MBB-1660 Producer: Sunnen Created: 2022 Parameters: Length range: max. 400 mm Diameter range: 1.5-165 mm Machine height: 1600 mm Machine length: 1524 mm Machine width: 762 mm

Drum brakesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tthroat: 400 mmstroke: 30...140 mmtable-size: 1000 x 750 mmhole in the table: 360 x 400 mmram surface: 630 x 500 mmram adjustment: 110 mmtotal power requirement: 18 kWweight of the machine ca.: 16 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

degree: 700 GradThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. pressure: 8 barcontrol voltage: 24 Volttotal power requirement: 15 kWNumber of working hours: 20.563 h- Maximum pressure: 8 bar- Delivery quantity: 2,57 m³ / min- Nominal power: 15 kW- Control voltage: 24 VoltThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

total power requirement: 38 kWdegree: 500 Gradweight of the machine ca.: 2,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pulling force - max.: 16 tbroaching length max.: 1250 mmtable width: 400 mmbroaching speed: 1...6,4 m/minreturn speed: 19,5 m/mintool length - max.: 1500 mmtotal power requirement: 42 kWweight of the machine ca.: 16 tdimensions of the machine ca.: m- Specification: 2- jobs broaching right or left / right and left at the sametimeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Rohb Model: RKA86 Year of Manufacture: 2007 Find more here - / Contact us at -

x-travel: 6000 mmy-travel: 3500 mmz-travel: 1500 mmControl: 840 D table load: 12 theight over floor: 6300 mmtable dimension - longitudinal: 5000 mmtable dimension - cross: 2500 mmtool change unit: 200- fach weight of tools max.: 30 kgtool taper: HSK A 100 tool diameter: 250 mmtool length - max.: 500 mmspindle speed:: 5 -6000 U / minc-axis: -10 bis 370 °b-axis: 5 bis -95 °column daylight: 3000 mmtotal power requirement: kWweight of the machine ca.: 161 tdimensions of the machine ca.: 20,5 x 11 x 6,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1510 mmwidth: 680 mmheight: 1000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. pressure: 8 barcontrol voltage: 24 Volttotal power requirement: 15 kWNumber of working hours: 39.819 h- Maximum pressure: 8 bar- Delivery quantity: 2,57 m³ / min- Nominal power: 15 kW- Control voltage: 24 VoltThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 16 mmstroke: / mmtable-size: / mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 12 mmstroke: / mmtable-size: / mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.