other metal working machines used for sale (10,964)

Key data: 700 °C, 30 mm, 1500 mm

Temperature max: 700° Celcius Opening LxH: 1,500 x 30 mm Country of origin Netherlands Electrical power: 14 kW Machine LxWxH: 2,000 x 1,000 x 1,700 mm Machine weight: 1500 kg

Key data: 900 °C, 250 mm, 220 mm

Maximum temperature: 900° Celcius Inner dimensions LxWxH: 220 x 250 x 200 mm Country of origin: Germany Weight: 300 kg Oven outer dimensions LxWxH: 1000 x 700 x 1400 mm

Key data: 150 kg, 480 mm, 375 mm

Hammer weight: 150 kg Stroke length: 480 mm Stroke rate: 168 p/min. Projection: 375 mm Plunger diameter: 180 mm Origin: England Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Machine Weight: 6000 kg

30T Heat Size EAF Meltshop with Billet Caster Year of Mfg. 2004-2014, installed but never been used. The Equipment was purchased over a 10-year period, starting in 2004. But recently management not get involved in steelmaking. The Buyer needs to invest in completing the Installation. A detailed plant assessment report (prepared by DANIELI) outlines the required works / investment to put it into operation. According to the report, the Steel Making Plant can reach more than 230.000 TPY billets production after adjustments to existing equipment and installation of a LF. The line consists of: • 30 Ton EAF (Electric Arc Furnace) 'CONCAST' Shell: Spout type; Diam. 4.0 M; Shell height 1.3 Int. Panels diam. 3.8 M; Hot heat 5 Ton; Bucket volume 23.0 M³; El. Pitch diam. 900 mm; Electrode diam. 16” 3x buckets charge; Tap-to Tap Time 90 min.; Power on 73 min. Transformer 17/20 ...

rolling capacity max.: tworkpiece diameter: 470 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand shredder Mfc.: METSO Denmark A/S Model: M&J Eta PreShred 4000S Built: 2013 Condition very good Working hours: 11,347 Power supply: Voltage 400 V AC, 50 Hz Main motor: 2 X 200 kW Rated current 760 A Main motor, full load current 2 x 341 Amp., PLC controller Drive principle, hydrostatic transmission with power consumption limiter. Working cutting cassette: 2 shafts Operating asynchronously Speed: 33 rpm Number of rotary knives: 2 x 12 pieces Number of lower, fixed knives 2 x 24 pieces Bearings 2 x 2 barrel

GEKA HYDRACROP 55/S hydraulic ironworker machine was built in 2018 in Spain by MAQUINARIA GEKA S.A. The machine, equipped with 5 work stations, is designed for precision machining of flat bars and angle bars. Each station is controlled by two hydraulic cylinders, which give the possibility to work independently or in parallel on two stations simultaneously. The GEKA HYD 55 S ironworker machine weighs 1390 kg. Technical specifications of the GEKA HYDRACROP 55/S ironworker machine General data - maximum punching force: 55 t - maximum cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - engine power: 5 kW - weight of the GEKA HYDRACROP 55/S machine: 1390 kg Flat bar shearing station - flat bar dimensions: 300 x 15 mm; 200 x 20 mm - blade length: 305 mm - working height: 880 mm Angle bar shearing station - shearing of angle bar at 90°: 12 ...

serial number: B024D04184T fork length: 1050- 1220 mmweight: 9640 kgsize of tire: 28 x 12 x 22 size of tire: hinten 22 x 8 x 16 : 70 % height of stroke: 4600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3 : 900 mm centre distance: 2x 4mm mmDistance between centres: 1x 5 mm mmcapacity: 600 kp : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Rohb Model: RKA86 Year of Manufacture: 2007 Find more here - .ucymachines/ Contact us at - sales@ucymachines

x-travel: 6000 mmy-travel: 3500 mmz-travel: 1500 mmControl: 840 D table load: 12 theight over floor: 6300 mmtable dimension - longitudinal: 5000 mmtable dimension - cross: 2500 mmtool change unit: 200- fach weight of tools max.: 30 kgtool taper: HSK A 100 tool diameter: 250 mmtool length - max.: 500 mmspindle speed:: 5 -6000 U / minc-axis: -10 bis 370 °b-axis: 5 bis -95 °column daylight: 3000 mmtotal power requirement: kWweight of the machine ca.: 161 tdimensions of the machine ca.: 20,5 x 11 x 6,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: CNC Model: Speedform RapidCleaner Year of Manufacture: 2017 Function: Fully automatic cleaning device for laser sintering processes. Benefits: - Simplifies, speeds up, and improves the cleanliness of sintered part cleaning. - Reduces or eliminates manual cleaning efforts. - Effective even in small and deep areas. Find more here - .ucymachines/ Contact us at - sales@ucymachines

projection area: 510x350 mmtable-size: 300x170 mmlongitudinal travel: 200 mmcross travel: 50 mmvertical movement: 150 mmamplification -fold: 10/20/50/100 voltage: 220 Vdimensions of the machine ca.: 850x110x1800 mmweight of the machine ca.: 310 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

projection area: 510x350 mmtable-size: 300x170 mmlongitudinal travel: 200 mmcross travel: 50 mmvertical movement: 150 mmamplification -fold: 20 voltage: 220 Vdimensions of the machine ca.: 850x1100x1800 mmweight of the machine ca.: 350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1680 mmwidth: 780 mmheight: 1250 mmweight: 63 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: 700 mmworking heigth: 390 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.