other metal working machines used for sale (10,964)

Melfa Mitsubishi RV-12SL A Melfa/Mitsubishi RV-12Sl industrial robot is for sale. It was checked before disassembly and is in good condition. The robot was regularly serviced until it was removed. It comes with a Melfa CR3-535M controller and an R28TB teach panel. Find more here - .ucymachines/ Contact us at - sales@ucymachines

degree: 0working heigth: mmlength: mmwidth: mmdepth: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cast iron control/tracing marble Length: 1700 mm Width: 700 mm Thickness: 230 mm Height on feet: 940 mm Weight: 0,8 T

connected load frequency: 230 Vbattery: 24V / 100Ah Brush diameter: 510 mmturning speeds: 175 U/min0: Luft 24 L / stank capacity: 50 / 50 Literweight: 160 kgrange L-W-H: 1,1 x 0,52 x 1,0 mmKREMER floor cleaning machine:Packed with battery and chargerTheoretical surface cleaning:Output: 2000 m²/hSuction width: 850 mmCleaning width: 510 mmMax. working area incline: 2%Fresh/waste water tank volume: 50/ 50 LThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic feed via Diethei PD 100 control To the extension on the right Max. feed length: 2000 mm

tool adaptor: . weight: . kgmaterial: . Partly with tools 34 piecesThe technical data is manufacturer or operator information and is therefore notbinding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch teamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

degree: 220 working heigth: . mmlength: . mmThe technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch teamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: . lfeed pressure: . barcoolant capacity: . lThe technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch teamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing : black-grey structure (RAL 7021) Extracts : black-grey structure (RAL 7021) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 lfd meters of bending tools fully assembled. Available in different sizes and with many accessories!

! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing : black-grey structure (RAL 7021) Extracts : black-grey structure (RAL 7021) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 lfd meters of bending tools fully assembled. Available in different sizes and with many accessories!

! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing : black-grey structure (RAL 7021) Extracts : black-grey structure (RAL 7021) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 lfd meters of bending tools fully assembled. Available in different sizes and with many accessories!

Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing : black-grey structure (RAL 7021) Extracts : black-grey structure (RAL 7021) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 lfd meters of bending tools fully assembled. Available in different sizes and with many accessories!

Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 410 kg As a set, approx. 26 linear metres of bending tools are fully assembled. Available in different sizes and with many accessories!

! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 410 kg As a set, approx. 26 linear metres of bending tools are fully assembled. Available in different sizes and with many accessories!

The Section Mill was commissioned in 2011 including advanced rolling mill mechanical equipment alongside electrics and automation systems utilizing Siemens-brand technology. The rolling reutilized a minor portion of the equipment of the previous rolling mill standing there. Those are the finishing mill stands, the high-speed shear before cooling bed and finishing cold shear. Designed for a production capacity of 600,000 tons per year, the rolling mill can process either billets, blooms, or beam blanks into a wide mix of beams, sections, and flat bars. It features a 120 tph walking beam reheating furnace, a breakdown reversible mill (BDM), a three stands ultra-flexible reversing mill (UFR), and an eight-stand continuous finishing mill. The facility is further equipped with advanced finishing services, including straighteners, cutting saws, cold shear, magnetic stackers, and strapping ...

Hyundai Steel Dangjin Facility (widely known as "Thin Plate Mill") is a premier steel production plant featuring a Compact Strip Process (CSP) as the main production line, complemented by a 150-tonne heat-size electric Meltshop, a thick Slab Caster, and two Skin Pass Mills. Initially commissioned by Hanbo Steel in 1995, this facility was acquired by Hyundai Steel in 2004 including a major modernization in 2011 and more recent upgrades, ensuring its continued excellence in production. Assets Available for Sale: • Electric Meltshop 150 tonnes heat size – DC EBT Electric Arc Furnace, Ladle Furnace, Vacuum Degasser and associated equipment. • CSP – A Thin Slab Cast & Rolling line combining casting, heating, and rolling. 55mm thickness slabs directly enter a tunnel furnace and are rolled in a Hot Strip Mill for final strip thickness from 1.4 to 16mm and up to 1,560mm width ...

cutting angle: 90 °cutting length: 150 x 150 mmwork height max.: 900 mmtable:: 1000 x 650 mm engine output: 3,0 kWweight: 900 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 40 kg, 1100 mm, 630 mm

Stock number: 3973 BALANCING MACHINE Manufacturer: SCHENCK, Type: R 2 N Machines NO.: ARD 0537, Year of manufacture: 1974 Specifications: Max. diameter 630 mm mm Max. tool weight 0.3 - 40 kg. Max. workpiece length 1100 mm Steuerung New Control VMI APT Balancing Spindle speed 450 - 1800 rpm Length: 1300 mm, Height: 1200 mm, Width: 500 mm, Weight: 800 kg

: . : . : . Electric air purifierThe technical data is manufacturer or operator informationand is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch teamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: . : . : . The technical data are manufacturer or operator information and are therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively.The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch teamThe data for this ad was created with ModulMWS - the software solution of Logo ...

Granit marble ATELIERS MAITRE Length: 2000 mm Width: 1200 mm Thickness: 400 mm Height on feet: 910 mm Class 2 Weight: approx 2 T

Granit marble Length: 1510 mm Width: 1005 mm Thickness: 160 mm Height on feet: 1015 mm Weight: approx 0,5 T

air flow quantity: . m³/hsuction power: . kPapower capacity: . kWThe technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch teamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vibrator 2 tubs WALTHER TROWAL type TA 2/145 Internal tub dimensions: L 840 mm x W 360 mm x Depth 470 mm Coating in good condition Loading from the top Unloading of parts through the front traps Functional machine Voltage: 380 V Dimensions (L x W x H): 2600 x 2000 x 1300 mm Weight: approx 4 T

Manufacturer: Butler Model: Elgamill TE 4000 Condition: Used Type of Machine: Horizontal Bed-Type Milling Machine Plate Size: 4340 × 1000 Table Size: 1000 × 1000 Control System: Siemens 810 M Spindle Hub: 480 × 360 Tool Holder Spaces: 130 Travel (X, Y, Z): 4000 × 1600 × 1000 Max Weight: 10500 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Reiden Model: BFSH Condition: used Type of Machine: Horizontal Bed-Type Milling Machine Plate Size: 3200 × 1000 Table Size: 1000 × 1000 Control System: Heidenhain TNC 1550 Spindle Hub: 350 × 350 Tool Holder Spaces: 130 Travel (X, Y, Z): 3000 × 1000 × 800 Max Weight: 5000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Depth: . mmWidth: . mmHeight: . mmshelf for Sk50 shotsThe technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch teamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

With Win XP, Fobagraf and MarkUs, Z-axis, rotary axis for interior and exterior lettering. MarkUs with camera for point and shoot, fiber laser with approx. 10,000 hours, laser power 50.4W Lens 163mm, ( 100+254mm possible ) Dimensions L x W x H: 90.00cm x 114.00cm x 172.00cm Lifting door opening via compressed air, size 80x30cm Vario S – Housing with side door – Automatic start via button on the front right Stable monitor arm with keyboard and mouse Interior with Z-axis, rotary axis, interior lighting with socket, camera with red illumination, flex extraction arm

Troughed belt continuous blasting machine Manufacturer: Rösler Drum ø: 400mm Max. workpiece length: 700/1000mm Single piece weight max. kg: 12 kg Loading capacity: 100kg Blasting wheels: 4 pieces á 7.5 kW Installed power : 45kW Warranty: 6 months functional and warranty guarantee when commissioned by DECK Sarl. Spare parts supply for the next 10 years Dlewyb OPTIONAL: Delivery to your factory Supervisor assembly / commissioning / training