other metal working machines used for sale (10,864)

Angle milling cutters, indexable insert milling cuttersWIDAX, HEINLEIN, WIDIA01-000546-002-2274.274.06.119.00diameter: Ø 242 mm6 cutting edges with 6 holders each for insertsbore: Ø 31 mm (milling cutter side) / Ø 21 mm / Ø 40 mm (rear)flange (rear) Ø 90 mmgroove width (rear) 16 mm, Depth 10 mmNew !Dimensions: 250 x 250 x 90 mm

max. wheel diameter: 4400 mmgear width: 645 mmmax. module: 35 Control: Siemens main drive motor: 37 kWtable diameter: 2500 mmmax.helical angle: +/- 30 °workpiece weight: 40000 kgtotal power requirement: 142 kVAweight of the machine ca.: 75 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic power unit with tank, compact power unitMANNESMANN REXROTHUpA4V-10 / A4.00 - 300MA ( UpA4V-10 / A4.00-300MA )p max = 200 barQ = 4.0 l/minmotor: 1.6 kW220 / 380 VNew !Dimensions: 290 x 220 x 330 mm

ScooterITOH DENKIPower MollerPM 570 AS - 15 - 250 - 3 - 200 - GDiameter: Ø 63 mmLength: 250 mmDimensions: 310 x 70 x 70 mm

Milling cutter mandrel , tool holder, with tightening threadWMW4 x 25 x 160 ( 4x25x160 )TGL 30-4113MK4shaft diameter: Ø 20 mmTool holder: Ø 25 mmNew !Dimensions: 490 x 45 x 45 mm

Hydraulic power unit with tankFLUTECPTF-200/1.0/M/pump: BOSCHFD 0710 513 300 101p max = 70 barQ = approx. 17 cm3/Umotor: 2.2 kW220 / 380 Vtank approx. 100 lused, tested !Dimensions: 650 x 550 x 1000 mm

Cutter mandrel , tool holder, with tightening threadWMW4 x 25 x 80 ( 4x25x80 )TGL 30-4113MK4shaft diameter: Ø 16 mmTool holder: Ø 25 mmNew !Dimensions: 300 x 45 x 45 mm

Hydraulic power unitORSTA52182P: 12.5 Mpa (125 bar)motor: 1.5 KW220 / 380 VTank: 40 lused, tested !Dimensions: 750 x 400 x 1000 mm

Milling cutter mandrel, tool holder, with tightening threadWMW3 x 25 x 160 ( 3x25x160 )TGL 30-4113MK3shaft diameter: Ø 20 mmTool holder: Ø 25 mmNew !Dimensions: 425 x 45 x 45 mm

tool adaptor: Sk 50 weight: . kgmaterial: . The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic power unit, micro power unitORSTA2.5/16 -0/0P: 16 Mpa (160 bar)engine: 1.1 KW220 / 380 VTank: 10 lon trolley !used, tested !Dimensions: 1000 x 450 x 910 mm

Tensioning leverOTTO GANTER (presumably)10 pcs. steel clamping lever adjustableM16 / 80 mm(GN 212.3-33-M16-80-D)180 x 150 x 35 mmNew !' Dimensions: (total) approx. 200 x 200 x 200 mm

Hydraulic power unit with radiatorBOSCH0 813 260 213 ( 0813260213 )2 819 042 654 ( 2819042654 )Q : 23 / 15 l/minp: 75 bar (1088 psi)tank capacity: approx. 100 Lmotor: 3 kW400 V 3ACCooler: 0.37 kW220 - 240 / 380 - 420 V 3ACused, tested !Dimensions: 1250 x 7800 x 1670 mm

Lathe chiselPAGUS315 x 40 x 40 mm ( 315x40x40mm)length hardened area: 70 mmtip length: 55 mmdepth tip: 15 mmNew !Dimensions: 315 x 40 x 40 mm

Hydraulic power unit with gate gate pumpORSTApump: 16/16-1TGL 10885p: 16 Mpa (160 bar)V: 16 cm3/Umotor: 1,1,00 5 kW940 rpm220 / 380 Vtank: 75 l as a spare part for Hohenstein RBT400 !' used, tested !Dimensions: 920 x 430 x 780 mm

Cylindrical Roller Bearing with Inner RingKOYO1523FC108787CYCS315FPP6Inner Diameter: Ø 750 mmOuter Diameter: Ø 1075 mmWidth: 400 mm New !Cylindrical roller bearing dimensions (packaging): 1200 x 1170 x 650 mmInner ring dimensions (packaging): 970 x 940 x 550 mm

width: 1300 mmheight: 2500 mmdepth: 1300 mmthickness of clamping plate: 50 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 kgworkpiece length - max.: 6500 mmweight of the machine ca.: 600 tdimensions of the machine ca.: 120x30 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic power unit with tankREXROTHpump: PV2V3-30/12R1MC-100A1p max: 100 bar (pump)Qmax: 8,50 bar 5 cm3/UTank 60 LMotor: 1.5 kW1400 rpm220 / 380 Vused, tested ! Dimensions: 600 x 520 x 810 mm

VEX 2 LDimensions: 580 x 120 x 120 mm

Engraving machineWMWFG 200 x 400table size: 400 x 200 mmworkpiece height max.: 300 mm stencil table: 380 x 380 mmx travel: 500 mmy travel: 250 mmz travel: 325 mmSpeed range: 2500 to 20000 rpm0.25 kW380 Vwith various stencils !Dimensions: 1000 x 1200 x 1500 mm

Thread rolling machine ORT RP18 2-roll Spindles diameter 69.95mm, See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2

Thread rolling machine ORT RP30U, 2-roll, 30 ton, swiveling heads, variable speed drive, #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior, Power (Ton): 30, Number of rollers: 2

ORT RP18B overhauled

Thread rolling machine ORT RP18 PLC 2 roll 18 tons ejector, SOLD - more available in stock, VENDUTA - altre disponibili in stock, Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior, Power (Ton): 18, Number of rollers: 2, PLC: Siemens

CNC Thread rolling and gear burnishing machine, ESCOFIER P440 CN, CNC Siemens, New 2004 - like new, 2-roll, 2 moving heads, 4000 daN rolling pressure, workpiece diameter: 100mm max., tool diameter: 180-245mm, Swivelling: +/-6°,, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s, motor power: 8.6kW, New: 2004, Condition: like new, under power in our warehouse, Mimu Machine Tools (Italy)

CNC Thread rolling and gear burnishing machine ESCOFIER P440 CN CNC Siemens New 2004 - like new 2-roll 2 moving heads workpiece diameter: 100mm max. tool diameter: 180-245mm Swivelling: +/-6°, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s motor power: 8.6kW New: 2004 Condition: like new This machine can be inspected under power in our warehouse in Gussago BS (Italy) Mimu Machine Tools

Profile projector NIKON V24A diameter 600mm 2 lenses: 10x and 20x machine visible in our warehouse in Gussago BS Mimu machine tools, Diameter: 600, Motorized:: Yup

plate thickness: 3 (VA), 4 (ST 40) mmcutting angle adjustment: 30 - 120 °cutting length: 200 mmthroat: 300 mmtable height: 900 mmwork stroke: max. 40 mmno. of strokes: max. 40 Hub/minPunching capacity: 125 kNpunch diameter: max. 105 mmtotal power requirement: 4 kWweight of the machine ca.: 20 tdimensions of the machine ca.: L 1,5x B 1,3 x H 1,38 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Muffle kiln, e.g. for colour firing of ceramic overglaze paints. Make no. 15297 max. temperature °C 1000 400 Volts, 50 Hz Year of manufacture 2004, little used External dimensions H 1750, L 1760, W 1360