other metal working machines used for sale (11,451)

Universal keyway drawing machine of the Cardinal brand suitable for tooling, fixture construction, training and mold making Groove width 3 - 100 mm max. groove length 1250 mm Cgichwnnmv Tensile strength 6000 kg Drawing length 1250mm Motor 5.5 KW Weight 1650 kg Dimensions 1000x1650x1000mm

High-frequency degaussing tunnel - 500x150 mm Properties Article number EDTR501505 Tunnel length 160 mm Passage size 500x150 mm Mounting interface Mounting hole Ø12.5 mm (8x) Material housing Polyurethanes (PUR) Surface treatment/finishing Painted Colour Red (Traffic red): RAL3020 Min./max. ambient temperature -10 to 40 °C Dust/water protection class IP55 Supply voltage 230V AC+N+PE; 50/60 Hz Apparent power 4268 VA Duty cycle 100%, 24 hours/day Control Not included Thermal protection Yes Indicator light demagnetizing on (blue) Yes Depth 230 mm Width 880 mm Height 467 mm Weight 135 kg Read more Price on request Article number: EDTR501505 Product These tunnels demagnetize long products and materials with an irregular surface. For thin-walled products up to 10 mm wall thickness or solid products up to 20 mm thick. High-frequency tunnels demagn ...

: Viele MK Aufnahmen taper MK: 40 taper MK: 50 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Radial Drilling Machine SCHLUMBERGER RF6 Spindle: SA40- with tools clamp Spindle exit: 300 mm Spindle speed: from 35 to 1800 RPM Table size: 1000 x 700 mm Year of construction: 1979 Column slide travel: 700 mm Maxi distance spindle nose/table: 850 mm (en high position) Mini distance spindle nose/table: 250 mm (en low position) Drilling / tapping function Auto descent Rotation at 360° on column Voltage: 380 V Width: 1300 mm Depth: 2000 mm Total high in low position: 2650 mm Total high in high position: 3000 mm Weight: env. 3 T

brinell hardness: - rockwell hardness: - throat: - mmweight of the machine ca.: - tdimensions of the machine ca.: - msclerometerDrive: 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: - mmturning diameter over slide rest: - mmturning length: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: - mmturning length: 1000 mmtotal power requirement: 9 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,511,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Profile Bending Machine SOCAD type CP 13.8 Outer wing angle capacity: 80x80x8 mm Flat on field capacity: 55 x 30 mm Flat on flat capacity: 75 x 20 mm T capacity: 80 x 80 mm Square capacity: 55 x 55 mm Equippeed with 1 fluted trainer roller Ø 300 x Ht 150 mm + 2 rollers Ø 260 x thickness 110 mm Voltage: 380 V Motor power: 8 CV Dimensions (L x W x H): 1800 x 1200 x 1400 mm Weight: 2,5 T

Vacuum Pump - Suction for Laser Dust There are two vacuum pumps. Please indicate how many you would like when making inquiries.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The curing furnace consists of a tunnel furnace in which the workpieces are baked after coating. The furnace is a straight tunnel furnace. The frame is made of steel with insulated panels. The mineral wool insulation becomes 150 mm thick in a special construction to prevent thermal bridges 1 Inner dimension length 7,000 mm Inner dimensions width 1,000 mm Inner dimensions height 2,500 mm 2 Outer dimensions incl. thermoblock, length 7,200 mm Outer dimensions incl. thermoblock, width 1,300/2,300 mm External dimensions incl. thermoblock, height 2,800 mm 3 substructure 1 set of steel profiles 80 x 80 and 40 x 80 mm 4 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5010 5 Insulation 1 set of rock wool 150mm 75 Kg/m³ 6 Ventilation system 1 set of galvanized steel sheet 7 Temperature max. 220°C 8 fans 1 pc. 7,500 m³/h 9 electric motors 1 pc  ...

Chemical pre-treatment for powder coating (3 zones) 1 Dimensions of the cabin length 3900 mm Width 1600 mm Height 2500 mm 2 dimensions of the pre-treatment complete length 4000 mm Width 3000 mm Height 4000 mm 3 Passage opening width 1000 mm Height 1700 mm The chemical pretreatment for the use of nanotechnology or phosphating consists of 3 stages in 1 spray chamber. Chemical spray pretreatment works in time and this means that the workpieces are manually pushed into the chamber. After closing the doors, the passage starts and the pumps start spraying. Each pump has different spray times. After the spraying process is finished, there is an alar ...

Chemical pre-treatment 3 zones for powder coating with spray ring (automatic) and manual Dimensions: Length: 8000 mm Width: 4500 mm Height: 3500 mm Max. workpiece dimensions (automatic): Length: 6500 mm Width: 1000 mm Height: 2300 mm Max. workpiece dimensions (manual): Length: 6500 mm Width: 2500 mm Height: 2300 mm Tanks are positioned at ground level with a sloping floor. Tank No.1 is thermally insulated and is heated by electric heaters. Achievement: 27 kW. Volume of each tank = 1.00 m³. For degreasing (1st tank), a medium pressu ...

Dimensions: Length: 8000 mm Width: 4500 mm Height: 3500 mm Extraction capacity: Q = 18000 m³ P = 15 kW The cab has 2 doors on one side for the insertion/outlet of the workpieces. The components are pushed into the cabin for coating via the overhead transport system. Walls, ceiling and doors are made of panels. The filters positioned on the roof absorb dust and other particles from the outside, thus ensuring clean ambient air in the cabin. The overspray during powdering in the cabin is absorbed by the extraction unit

Dimensions: Length: 7400 mm Width: 4000 mm Height: 3236 mm Extraction capacity: Q = 18000 m³/h P = 15 kW The cabin has a suction machine with filters to suck the powder from the cabin floor. The powder booth is set up in a pit to lower the entire height of the painting line. Manual doors are installed to enter the workpieces into the cabin. The overspray is extracted during powder coating via the floor. On the floor there is a grate for walking on and under the grate there is a second flat floor with automatic self-cleaning system, connected by air ducts with post-filter. A self-cleaning system automatically blows the powder from the bottom to the post-filter (suction machine) and consists of

Open Powder Spray Stand Dimensions: 2500 x 2250 x 2700 [mm] Extraction capacity: Q = 8000 m³/h P = 5.5 kW Filter: 1 stage: Filter cartridges 4 pieces à Ø 325 x 1000 [mm] 2nd stage: Pocket filter (absolute filter for fine dust) Note: The overspray during powdering is absorbed by the suction unit. The powder spray stand is delivered on rollers and is therefore mobile

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

Oven, doors single-sided, gas Dimensions: 4,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Recirculating air: Q = 12000 m³/h P = 2 x 2.2 kW Heat output: 69 kW Auxiliary heating: Gas indirectly via thermoblock

Oven, doors single-sided, electric Dimensions: 3,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 54 kW Auxiliary heating: electrically indirect via thermoblock

Dear Ladies and Gentlemen, We are looking for a buyer for an image-guided 3D coordinate measuring machine, make Keyence, XM series. Date of purchase 2018, but virtually unused. License would have to be transferable, there doesn't seem to be any restriction of Keyence here. Please feel free to contact us if you need more information. We look forward to your offer.

coolant capacity: 10 m3l/hHeadroom: 10 moperating pressure: 2 barvoltage: 420 V / 50 Hzmotor speed: 1430 U/minengine output: 0,25 kWweight: 10 kgnormal priming centrifugal pump,Housing and impeller made of stainless steel,Flange connections,Ref. no. 22/98-118884The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: - kWtool adaptor: 88 length: 560 mmcenter height of top slides: 65 mmweight: 17 kgCounter holder / horizontal milling device for tool milling machine Deckel Mod. FP 1 consisting of upper beam and mounting of the milling arbor. The distance from the middle of the milling arbor to the lower edge of the counter holder is 65 mm, the width of the guide is 88 mm.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 850 mmy-travel: 630 mmz-travel: 500 mmControl: Heidenhain : total power requirement: 16 kWdimensions of the machine ca.: 5 x 4,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LHS Lagertechnik, supplier of new and used shelving systems as well as general warehouse inventory. Due to the dismantling of a production plant, we sell several components of an ultrasonic cleaning system: - Manufacturer: Finnsonic - Models: M120IR / M120M / M80IR The equipment can be viewed on site. The price applies to all components together. Individual sales are possible by arrangement. An invoice with VAT will be issued. Self-collectors are welcome, free loading is offered. Shipping can be organized nationwide; please inquire about your transport costs. The sale is without guarantee and warranty.

number of controlled axis: . workpiece weight: 150 kgthroat: . mmtotal power requirement: . kWweight of the machine ca.: tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Radial Drilling Machine BERGONZI type UT 25 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 130 to 900 RPM Arm travel: 500 mm Max height table/spindle nose: 900 mm Column: Ø 180 mm 2 speeds motor Auto descent Return Spring defective Electric arm rise Delivered with: 1 cube Length 500 mm x Depth 400 mm x Height 450 mm 1 false table Lubricant pump Voltage: 380 V Length: 1500 mm Width: 900 mm Total height in height position: 2300 mm Weight: approx 1,2 T

tool clamping area: Ø 30 mmShipping weight: 50 kgPacking: ca. 600400200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bed length: 2790 mmbed width: 2 x 240 mmbed height over floor: - total power requirement: 0 kWweight of the machine ca.: 5,6 tdimensions of the machine ca.: 3,51,61,6 mNo. 03022-station end trimming machine /cutting and centering machineEMAG, type TEC 2/1000 SSIEMENS System 3 controlWorking area: diam. 6.3-25 x 180-1000 mm, drive power: 12.5 kWAccessories:Loading gantry, chip conveyor, coolant device, internal coolant supply for station 1.coolant supply for station 1.The machine is equipped with 4 spindles, which are steplesslyinfinitely variable from 500-5000 rpm via separate DC motors.adjustable. Processing options: Grooving, peeling,turning, drilling (thread), thread chasing, chamfering, countersinking.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7925 Type: UPW 25.1 Producer: VEB Created: 1988 Parameters: Rolling force: 25 t Cylinder width: 250 mm Shaft diameter: 80 mm Rise: 0.5-5 mm Weight: 2900 kg Equipment: Support ruler Boundary rings Set of threading cylinders Infinitely adjustable spindle speed