other metal working machines used for sale (10,875)

max. wheel diameter: 0 mmgear width: 0 mmmax. module: 40 min. module: 1 weight of the machine ca.: 0,05 tdimensions of the machine ca.: 0,5x0,3x0,3 mpitch and run-out tester unit for gear measuring machines.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shaper cutters from Module 1 to Module 14 available:- different no. of teeth, different pressure anles, different profiles, bores and sizes!shaft cutters Module 1-3 = 150 Euro, 4-5 = 250 Euro, >5 = 300 Eurodisc cutters Module 1-3 = 150 Euro, 4-6 = 200 Euro, 7-10 = 250 Euro, 10-14 = 300 Euro.complete list on request!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 800/400 kgstroke: 6/12 mmstroke speed: 5/8 m/minoutput: 1,25 kwconnected load frequency: 230 Vweight: 21 kgdimensions: 420 x 180 x 280 mmDue to the low installation height, the maximum lifting height remains available.Control with emergency stop. (required by law)Suspension with safety hook.Overload protection with slip clutch.Built-in limit switch.Collection bag for chain.Control console with 1.6 m cable.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thickness: 16 x 16 mmnumber: 4 Stähleweight: 3 kgdimensions: 300m x 200 x 50 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 32 - 50mm der Buchsenlength: 350 mmgroove width: 10 - 12 - 14 mmweight: 20 kgdimensions: 400 x 150 x 250 mmGroove widths:10 - 12 - 14mmDiameter of the guide bushes:32 - 34 - 35 - 36 - 38 - 40 - 42 - 44 - 45 - 46 - 48 - 50mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 8 St.range L-W-H: 710 x 510 x 900 mmweight: 67 kgDrawer cabinet with 8 drawersDrawer dimensions 600 x 435mmDrawer height:Drawer 1 - 7, 81mmDrawer 8, 173mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 6000 mmwidth: 3250 mmnumber: 4 T-slot - width: 32/48 mmT-slot - distance: 180 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe Palttenfeld consists of 4 plates, size per plate 3250x1500 mm, number of T-grooves per column 7, price 1000 €/m²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ram weight: 1000 kgstroke: 1000 mmthroat: 800 mmimpact capacity: 4200 mkptotal power requirement: . kWweight of the machine ca.: tdimensions of the machine ca.: mSteam driveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 7000 mmwidth: 7000 mmnumber: 8 Thickness: 350 mmT-slot - width: 36/58 mmT-slot - distance: 285 mmdepth of the T-nuts: 62 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mPanel consists of 8 panels Size per panel 3500x1750x350Number of T-slots per panel 7 pieces Total 49 m²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 6000 mmfloor-plate width: 2000 mmfloor-plate height: 350 mmwidth of T-slots: 36/60 mmT - slots distance: 285 mmnumber of T-slots: 8 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 4000 mmfloor-plate width: 1600 mmfloor-plate height: 300 mmT-slot - distance: 175 mmT-slot - width: 28/48 mmnumber of T-slots: 9 total power requirement: kWweight of the machine ca.: 10 tdimensions of the machine ca.: 4000x1600x250 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece weight: 4 kgworkpiece length: 200 mmdia. on complete length: 200 mmControl: Schenck-Lauer electrics - voltage/frequency: 400 / 50 V/Hzdimensions: 4,1 x 4,2 x 2,5 mconnected load: 12 kVAflange diameter: 250 mmweight: 4,5 tBalancing machine for rotors - Turbocharger fuselage groups- hydraulic measuring station- Compensation station- Pulsation measuring table- Chip extraction- Measuring instrument CAB 950T- feeding device- Schenck/Lauer Control on Dase of WindowsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 6000 mmfloor-plate width: 2400 mmfloor-plate height: 300 mmwidth of T-slots: 45/78 mmT-slot - distance: 300 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: 50 x 50 x 5 mmround steel bars: 30 mmU-iron on the x-axis: 60 x 40 x 6 mmroll diameter - bore: 40 mmroll diameter -toolpieces: 118 - 148 mmturning speeds: 9,3 U/minvoltage: 400 V / 50 Hztotal power requirement: 1,5 kWweight of the machine ca.: 0,425 tdimensions of the machine ca.: 1,5 x 0,8 x 0,8 m• Machine has got a standard roller set for profiles: flat upright 50 x 10, flat 50 x 15, upright 30, square tube 50 x 50 x 2,5, retangular tube 50 x 25 x 2,5.further roller sets optionally:for exampel: 1 set (6 rolls) for round pipe D = 3/8 + D = 3/4,Surcharge for each extra roller set: € 440,-/setMachine in unused condition.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 5000 mmfloor-plate width: 2100 mmfloor-plate height: 300 mmT-slot - width: 40/63 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ram hammer weight: 480 kgstroke: 710 mmthroat: 550 mmimpact capacity: 1250 kpmno. of strokes: 210 Hub/minram hammer stroke: 710 mmwork height max.: 720 mmtotal power requirement: . kWweight of the machine ca.: 7,4 tdimensions of the machine ca.: mpressure: 400 kgSteam driveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 520 mmheight: 700 mmdepth: 350 mmthickness of clamping plate: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThere are 2 pieces Width: 300 mm Height: 1200 mm Depth: 510 mmAbout usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshop You want to sell machines production lines or your company, then talk to us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 800 mmmeasuring range X-axis: 520 mmTable dimensions: 700 mmweight: 900 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: 40 x 40 x 5 mmU-iron on the x-axis: 80 x 45 x 5 mmroll diameter - bore: 40 mmroll diameter -toolpieces: 150 mmturning speeds: 10 U/minvoltage: 400 V / 50 Hztotal power requirement: 1,5 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 0,8 x 0,92 x 1,4 m• Machine has a standard set of rolls for profile: flat (upright) 60 x 10, flat 80 x 15, Square 35, square pipe 45 x 45 x 2, rectangular pipe 60 x 30 x 3, Further sets of rolls can be supplied optionally,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 800 mmwidth: 500 mmheight: 1000 mmpower capacity: kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: m2 unitsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 12 mmthreading length: 20 mmturning speeds: 400 U/minworking area: 500 - 1600 mmweight of the machine ca.: 25 Kgdimensions of the machine ca.: m• pneumatical thread cutting device, M3 - M12,• with 6 adapters of thread cuttings, Size 1,• control valve with lubrication,• order no. 31681,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tensile testing machine Manufacturer: Karl Frank GmbH Type: 81559 Year of construction: 1980 Duck test: height: 1000mm, width: 400mm, depth ungraenzt Force ranges: 2000N, 1000N, 500N, 200N, 100N, 50N Original price at that time: 49.855,00 DM ATTENTION: The device has not been tested for functionality. All information without guarantee

Number of tools: 36 St.dimensions: 0,72 x 0,56x 0,95 mweight: 27 kgNew movable tool trolley for toolholders with 40 taper or optional for VDI 40 toolholders. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of tools: 30 St.dimensions: 0,72 x 0,56x 0,95 mweight: 27 kgNew movable tool trolley for toolholders with 50 taper. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code 8499 Omschrijving Projektor Fabrikaat Hilger Type TT 288.311 Serienummer 55211 Vergrotingen 10x, 15x, 25x, 50x en 100x

Code 6398 Umschreibung CNC Bahngesteuerte Drei-Koordinaten Messmaschine Fabrikat DEA Typ IOTA 1102 Maschine Nummer 514 Baujahr 1989 Steuerung DEA CU / 01 Tischabmessung L x H x B 1800 x 1000 x 700 mm Längs X = 915 mm Quer Y = 610 mm Vertikal Z = 610 mm Nutzbare Messvolumen 0.34 m3 Gewicht 2050 kg Bemerkungen Maschine hat KEINE Messkopf ( wie Renishaw ) Maschine ist ohne Computer

Code 111256 Description Hydraulic vertical Keyseatingmachine Make FRÖMAG Model RAPIDA D 63/425 Serial no: AKK 87370 ASK 1660 Year 1979 Capacity : 3 – 63 mm Stroke length: max. 445 mm Speed: 2 – 22 m/min max. weight on table: 30.000 kg Tabel size 685 x 455 mm Accessories Autom. Cycle Very much tooling Condition Good

table length: 1000 mmtable width: 1000 mmtable load: 1,5 tflange diameter: 700 mmturning speed: max. 0,04 U/minweight of the machine ca.: 1,2 tdimensions of machine L x W x H: 1,60 x 2,0 x 1,50 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 0 mmtable width: 0 mmtable load: 0 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 112 kW= transfer machineShift drum with 10 workpiece stations,22 machining units (drilling 7 units, drilling and thread cutting8 units, drilling and sinking 5 units, drilling, sinking and thread-cutting 2 unit),spindle taper SK 40 each, engine power of the individual unitsbetween 4.0 and 4.5 kW,SIEMENS control SIMATIC OP 3, assembly robot ABBAccessories.: chucks (without jaws), chip conveyor, coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.