other metal working machines used for sale (11,970)

CNC lathe Type: SL-20 THE Manufacturer: Haas Year: 2004 Max turning diameter: 262 mm Max workpiece diam over bed:584 mm Max workpiece diam over support: 241 mm Max turning length: 508 mm Spindle bore: 51 mm Max spindle speed: 4000 rpm X: 215 mm Z: 508 C-axis Driven tools Tailstock Tool probe Machine weight: 4082 kg In good condition, under power Find more here - / Contact us at -

CNC horizontal milling machine Type: FC 63 H SCA Manufacturer: TOS Overhaul: 2003 Control: Heidenhain Table: 630 x 1600 mm X: 1250 mm Y: 315 mm Z: 400 mm Spindle speed: 14 – 1400 rpm Main motor power: 7.5 kW Spindle taper: ISO 50 Machine weight: 11000 kg Included vice, tools, divider In good condition, under power Find more here - / Contact us at -

Parpas Omv FAS - 4 PMax longitudinal travel X-axe: 1500 mm Max cross-travel Y-axe: 750 mm Max travel Z-axe: 700 mm Power on spindle: 2.2 kW Admission in boring head (ISO): ISO-40 Spindlespeeds: 80 – 3600 rpm Control: ECS AZ 200 CNC Weight: 8500 kg ACCESSORIES & TOOLING: yes Coolant pump: yes Toolholder: yes Number of tools: 20

Adapters for tool presetters The adapter is inserted into the SK50 base holder of the tool presetter and thus serves as an intermediate module for Tool holders with size SK30 or BBT30. The adapter is calibrated and equipped with calibration balls.

X-axis measuring range (tool diameter) approx. 400 mm Measuring range Z-axis (tool length) approx. 400 mm max. tool weight 10 kg Tool holder/basic holder SK 50 Tool adapter SK50 to SK40 with calibrated calibration balls Measured value display with operating instructions/manuals Well-maintained tool presetter in very good condition.

X-axis measuring range (tool diameter) approx. 400 mm Measuring range Z-axis (tool length) approx. 400 mm max. tool weight 10 kg Tool holder/basic holder SK 50 Tool adapter SK50 to SK40 with calibrated calibration balls Measured value display with operating instructions/manuals Well-maintained tool presetter in very good condition.

Machine type: Tube pointing hammer machine (cold pointing)Tools: 4 hydraulically/pneumatically driven hammer jaws that act synchronously on the pipe end.Area of application: Preparation of pipe blanks for the cold drawing process (steel, stainless steel, non-ferrous metal).Scope of delivery:AVS-100 hammer pointing machineTube separation (SEMA)All available documentation

Machine type: Tube pointing hammer machine (cold pointing)Tooling: 4 hammer jaws, hydraulically or pneumatically driven, acting simultaneously on the tube end.Application: Preparation of steel, stainless steel, or non-ferrous tubes for cold drawing.Scope of delivery:AVS 63 pointing machinePipe separationAll available documentation

table length: 3000 mmtable width: 1500 mmburner heads: div. Control: Siemens 840 D SL total power requirement: 73 kWLaser cutting systemTrumpf TruLaser 3030 Lean EditionMachine no.: A1225A0096Manufacturer country: CHLaser power: 3200WType: L 20Year of manufacture: 2012Operating hours:Machine on hours ON 25263 hWorking hours / laser beam ON 7755 hWorking area: 3000 x 1500 x 115 mmControl: Siemens Sinumerik 840 D SLMax. sheet thickness / ST: 20 mmMax. sheet thickness / VA: 12 mmMax. sheet thickness / AL: 8 mmMax. speed: 140 m/minPositioning accuracy: 0.1 mmTotal power requirement: 73 kVAMains connection: 400/50 HzControl voltage: 24VFuse: 3 x 125 AAir connection: 7-10 barNitrogen connection: 30 barOxygen connection: 20 barDimensions: 6500 x 7600 x 2200 mmWeight: 12000 KgMachine is in very good conditionand optimized by Trumpf Netherlands in 12/2022.Documentation and evidence: Completely av ...

A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/ ...

x-travel: mmy-travel: mmz-travel: mmx-axis: 6000 mmy-axis: 2600 mmz-axis: 1600 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Storage tent, approx. 6x4 m, side height approx. 300 cm, rubber tarpaulin green, possibly not complete

Cable overrun protection 2-piece, approx. 170b cm

Plastic waste bins STIER, 2 pcs., 240 l each, blue/yellow, with 1 pc. approx. 110 l, contents must be taken with you

Wooden trestle ladder ZARGES, 2x8 steps

Commercial vacuum cleaner KÄRCHER, 2 pcs.

Steel shelf metal blue, approx. 200wx120h cm, complete with content

Metal cross-cut saw JEPSON Premium Super on frame

Tension straps with ratchets, eye bolts, complete contents boltless shelf metal, approx. 100x250h cm, w. shelf

Bar table metal, ø approx. 70 cm, total height approx. 105h cm, plus another bar table plastic white, paper towel dispenser, roll width approx. 40 cm, fire barrel BZT, self-made, height approx. 110h cm, ø approx. 30 cm

Fire extinguisher ROTECH and GLORIA, 11 pcs. in wooden box, approx. 100x100 cm, condition fire extinguisher n. known

Remaining capacity of pallet racking item 167, except for the individually indicated items

Tool trolley GEDORE, with mounted vice, BB approx. 100 mm, closed, contents not known, dimensions upper plate approx. 40x57 cm

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with intermediate shelf -Width: 930 mm -Depth: 500 mm -Height: 1950 mm -Door: lockable -Weight: 61 kg

CNC vertical machining center Type: VF-7/40 Manufacturer: Haas Year: 2015 Control: Haas X: 2134 mm Y: 813 mm Z: 762 mm Spindle speed: 8100 rpm Table: 2134 x 711 mm Table load: 1814 kg Inline direct drive Tool probe Workpiece probe Machine in good condition, under power Find more here - / Contact us at -

CNC vertical lathe Type: SKIQ 12 CNC Manufacturer: TOS Control: Mefi Clamping plate diameter: 1250 mm Maximum turning diameter: 1700 mm Maximum workpiece height: 1335 – 1785 mm Maximum workpiece weight: 12000 kg Clamping plate speed: 2.5 – 500 rpm Main motor power: 40 kW Tool magazine: 15 positions Slide stroke (Z): 1000 mm Vertical crosshead movement: 800 – 1250 mm Slide dimensions: 180 × 200 mm Dimensions: 6100 × 5050 × 5255 mm Machine weight: 27000 kg In good condition, under power Find more here - / Contact us at -

CNC vertical machining center Type: FVC 120 CNC Manufacturer: TYC Control: Heidenhain X: 2200 mm Y: 1700 mm Z: 900 mm Max spindle speed: 24000 rpm Tool clamping: HSK-A63 Tool magazine: 32 positions Maximum tool length: 300 mm Maximum tool diameter: 150 mm Maximum tool weight: 6 kg Dimensions: 8900 x 7350 x 5100 mm Machine weight: 30000 kg In good condition, under power Find more here - / Contact us at -

Offer 25443 Specifications: - Bear weight 40 kg - Impact regulation - Lifting height infinitely adjustable 200 mm - Impact rate approx. 220 1/min - Projection 280 mm - Anvil - height approx. 560 mm - Anvil - Weight 250 kg - Drive 380 V / 4 kW - Space requirement approx. W 850 x H 1100 x D 1350 mm - Weight approx. 850 kg

ELECTROMASHSTAN EMC-SP/3/05 Sigma roll forming line was built in 2019 in Ukraine by ElectroMashStan. The line is designed for the production of precision Sigma-type cold-formed profiles, which are used in among others steel structures, load-bearing elements and supports. The production cycle is fully automatic, thanks to the use of an automatic sheet decoiler. The strip with a maximum thickness of 3 mm is uncoiled towards the workspace, where it is formed using rollers. The ELECTROMASHSTAN roll forming line offered is fully complete. Applications for Sigma profiles: – steel constructions (halls, warehouses, industrial buildings) – prefabricated buildings and light steel construction systems – load-bearing elements (girders, columns, beams) – brackets, bracing and structural frames – wherever a high load-carrying capacity is required in a relatively lightweight construct ...

Slotting machine TOS HOV63