other metal working machines used for sale (10,948)

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 25 mm -Dimensions: see photo technical drawing -Overall dimensions: 105/75/H65 mm -Total weight: 2.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/73/H48 mm -Total weight: 1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/73/H47 mm -Total weight: 1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/90/H55 mm -Total weight: 2.1 kg

CNC cylindrical grinding machine Type: TOS BUA 63/3000 CNC Manufacturer: TOS Overhaul: 2020 Control: Siemens Sinumerik 840D Max. grinding diameter: 630 mm Max. grinding length: 3000 mm Max. workpiece weight: 1200 kg Grinding wheel dimensions: 750 × 100 × 305 mm Grinding motor power: 22 kW Machine weight: 12,700 kg Dimensions: 9900 × 2980 × 1875 mm Working spindle taper: Morse 6 Tailstock taper: Morse 6 Support lunettes Machine in good condition, fully functional Find more here - / Contact us at -

length: 600 mmwidth: 300 mmheight: 80 mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A complete Schleuniger cable processing system for processing large cables and wires is available. 1) Cutting and stripping machine Schleuniger MegaStrip 9600, year of manufacture: 2008, cable cross-section range: 0.5mm²-100mm², max. conductor cross-section: 240mm², max. cable diameter: 25.4mm, max. stripping length front/right: 300mm, max. stripping length rear/left: 150mm, max. feed: 2m/s, belt width: 30mm, blade pairs: 4, machine dimensions X/Y/Z: approx. 900mm/800mm/1300mm, weight: approx. 320kg. 2) Rotary cutting unit Schleuniger RU 9600, year of manufacture: 2007, max. opening: 27mm, number of blades: 2, blade system: rotating diametrical blades, max. cutting depth: 6mm, clamping jaws: 4. 3) Cable payoff and feeding unit Schleuniger PF 4600/406.00, year of manufacture: 2010, max. roll weight: 600kg, max. roll diameter: 1050mm, max. roll width: 750mm, roll bore range: 38mm-125mm, ...

A fully automatic cable processing machine Schleuniger with two stations and one compact station Strunk is available. Cable length range: 55mm-65000mm, conductor cross-section range: 0.13mm²-6mm², max. stripping length: 18mm, max. feed speed: 12m/s. Machine dimensions X/Y/Z: approx. 3750mm/1450mm/1850mm, weight: approx. 950kg. Documentation available. An on-site inspection is possible.

A fully automatic Schleuniger cable processing machine with two stations is available. Stations: 2, system: Cut-Strip-Terminate, conductor cross-section range: 0.15mm²-6mm², AWG range: 26-10, min. cable length: 60mm, max. cable length: 65000mm, max. feed rate: 12m/s, stripping length: 0mm-45mm, swivel movement range: 0°-90°, crimping force: 20kN. Machine dimensions X/Y/Z: approx. 3650mm/1850mm/1300mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible.

Includes: - Océ TDS600 Folder - dimensions: 1400/2300x1100x1020mm Print speed: approx. 9 A1 prints per minute .nbsp; - Print resolution: 600 × 1200 dpi .  - Technology: Electrophotography (LED) with Océ Radiant Fusing.nbsp; - Paper width: up to approx. 914 mm As well as operation provided with: - mobile cabinet - desktop - monitor - keyboard and mousePower: 230 V

turning diameter over bed: Ø16 mm mmweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2045 x 900 x 1685 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC vertical machining center Type: DMC 1035 V ECOLINE Manufacturer: DMG MORI Year: 2012 Control: Siemens Sinumerick 840D Total hours: 12,058 Spindle hours: 5,039 X: 1035 mm Y: 560 mm Z: 510 mm Working table: 1200 x 560 mm Tool magazine: 20 positions Max spindle speed: 8,000 rpm Chip conveyor Machine in good condition, fully functional, under power Find more here - / Contact us at -

CNC vertical machining center Type: DMC 1035 eco Manufacturer: DMG Year: 2010 Control: Siemens Sinumerik 810D Total hours: 25,503 Spindle hours:13,362 X: 1035 mm Y: 560 mm Z: 510 mm Max spindle speed: 8,000 rpm Tool magazine: 20 positions Rapid traverse X/Y/Z: 30 m/min Rated power: 17 kVA Torque:83 Nm Table:560 x 1200 mm Table load: 1000 kg Chip conveyor Dimensions: 3137 x 3355 x 2758 mm Machine weight: 4250 kg In good condition, fully functional, under power Find more here - / Contact us at -

CNC portal machining center Type: DV 1432 Manufacturer: Pinnacle Year: 2015 Control: Fanuc α 30/3000i 7.0 X: 3200 mm Y: 1400 mm Z: 900 mm X-axis rapid traverse: 16 m/min Y-axis rapid traverse: 20 m/min Z-axis rapid traverse: 20 m/min X/Y/Z feed: 10 m/min Rated power: 50 kVA Workpiece length (max.): 4000 mm Workpiece width (max.): 1350 mm Workpiece weight (max.): 8000 kg Max spindle speed: 8,000 rpm Spindle motor power: 18,5 kW Tool length: 350 mm Tool diameter: 127 mm Tool weight: 20 g Table: 1200 x 3200 mm Table load: 8000 kg Dimensions: 8130 x 4150 x 4500 mm Machine weight: 17000 kg Chip conveyor Machine in good condition, fully functional, under power Find more here - / Contact us at -

Wire EDM machine Type: Robocut C 600 i Manufacturer: Fanuc Year: 2018 Control: Fanuc Series 31i-W model B X: 600 mm Y: 400 mm Z: 310 mm Wire diameter (max.): 0.3 mm Workpiece height (max.): 310 mm Workpiece width (max.): 820 mm Workpiece length (max.): 1050 mm Max workpiece weight: 1000 kg Equipment: refrigerator, compressor Machine in good condition, fully functional, under power Find more here - / Contact us at -

Hydraulic press Type: H 1000 Manufacturer: Hidroliksan Year: 2018 Pressing force: 1000 t Stroke: 800 mm Shut high: 1300 mm Slide clamping surface:2300x3000 mm Table clamping surface:2300x3000mm Max table load: 10000 kg Side opening: 900 x 1000 mm Operating speed: max 9,8 mm/s Cylinder diameter: 500 mm Approach speed: 110 mm/s Return speed: 150 mm/s Main motor: 45 kW Frequency: 50 Hz Max power consumption: 110 A Dimensions: 4500 x 3500 x 6000 mm Total weight: 78,000 kg Machine in very good condition, fully functional, under power Find more here - / Contact us at -

CNC vertical machining center Type: DNM 400 Manufacturer: Doosan Year: 2010 Control: Fanuc i Series X: 635 mm Y: 435 mm Z: 510 mm Table size: 790 × 435 mm Max. table load: 400 kg Tool magazine: 20 positions Max. spindle speed: 8000 rpm Spindle power: 15 kW Spindle taper: ISO 40 Machine weight: 5000 kg Dimensions: 1962 × 2093 × 2509 mm Chip conveyor Machine in good condition, fully functional, under power Find more here - / Contact us at -

Reversible clamping device, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, dividing head, rotary indexing table, rotary coupling -Manufacturer: NIKKEN Rotary table with drive -Type: CNC-100 -Recording: SK40 -Clamping: pneumatic -Control: Z3BF UNIT -Tailstock: 2 pieces type P-105 -Dimensions of transport trolley: 600/940/H720 mm -Weight: 119 kg

Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: Straightening plate with support ribs and adjustable feet -Length: 3000 mm -Width: 1250 mm -Sheet thickness: 48 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 3000/1255/H900 mm -Weight: 3500 kg

EDM machine Mitsubishi FA20 The rear door seal needs to be replaced A complete service must be done after relocating the machine, adjusting axes According to the Mitsubishi Service Center, costs approx. 2,500 €

Plastic 3D printer manufactured in 2021. This FORMLABS Fuse 1 features a build volume of 165 x 165 x 300 mm and a hopper capacity of 8.5 kg for PA12 nylon. It operates with a laser type of Ytterbium Fiber and has a maximum part size of 15.9 x 15.9 x 29.5 cm. If you are looking to get high-quality 3D printing capabilities, consider the FORMLABS Fuse 1 machine we have for sale. Contact us for further details.

This 3-axis AGIE Hyperspark 2 Exact with Erowa was manufactured in 2005. It features an X-axis travel of 350 mm, Y-axis travel of 250 mm, and Z-axis travel of 250 mm. The machine is equipped with AGIE VISION 4 Software and includes an EROWA ROBOT MULTI with 60 ITS 148 places and 240 ITS 50 magazine places. If you are looking to get high-quality die-sinking EDM capabilities, consider the AGIE Hyperspark 2 Exact machine we have for sale. Contact us for further details.

CNC vertical machining center Type: Alpha-Center HP 2060 Manufacturer: KAAST Year: 2015 Control: Heidenhain TNC 620 X: 2060 mm Y: 850 mm Z: 815 mm Table dimensions: 2150 × 800 mm Max. table load: 3240 kg T-slots: 18 mm, 7 pcs, pitch 125 mm Spindle speed: 12,000 rpm Spindle taper: SK 40 Main motor power: 26 kW (35 HP) Rapid traverse (X/Y/Z): 33/33/25 m/min Working feed: up to 12,000 mm/min Max. tool length: 250 mm Dimensions: 5450 × 3540 mm Weight: 15200 kg Machine in good condition, fully functional, under power Find more here - / Contact us at -

Wire EDM Type: Agiecut Classic 3S Manufacturer: AGIE Year: 2005 X: 500 mm Y: 350 mm Z: 256 mm Max workpiece dimensions: 1050 x 650 x 250 mm. Max workpiece weight: 800 kg (without bath) or 400 kg (in bath) Wire diameter: 0.15 mm to 0.33 mm Maximum taper: ± 30° at a height of 100 mm. Machine weight: 3,900 kg Machine in good condition, fully functional, under power Find more here - / Contact us at -

EDM machine Type: Agietron Impact 3 Manufacturer: AGIE Year: 2002 X: 500 mm Y: 350 mm Z: 500 mm Worktable: 800 × 600 mm Max load capacity: 800 kg Electrode weight: max 50 kg Machine weight: 3800 kg Dimensions: 2850 × 2150 × 2850 mm Machine in good condition, fully functional, under power Find more here - / Contact us at -

EDM machine Type: Agietron Hyperspark 3 Manufacturer: AGIE Year: 2005 X: 500 mm Y: 350 mm Z: 500 mm Max workpiece weight: 800 kg Max workpiece dimensions: 880 x 680 x 350 mm C-axis: Integrated as standard for complex machining operations Machine in good condition, fully functional, under power Find more here - / Contact us at -

5-axis CNC machining center Type: VTXU Manufacturer: Hurco Year: 2005 Control: Ultimax Hours: 39044 Indexed 5 axis X: 800 mm Y: 700 mm Z: 510 mm Spindle taper: SK 40 Spindle speed: 12000 rpm, 18 kW Tool magazine: 32 positions X/Y/Z feed: 35 m/min Tilting table Table load: 265 kg Table: 610 x 500 mm Machine weight: 12000 kg Chip conveyor In good condition, fully functional, under power Find more here - / Contact us at -

A precision roller straightening machine is offered. Working width: approx. 120mm, processing size: approx. 0.2-1.5mm, incl. control panel and digital displays, machine weight: approx. 450-600kg. Inspection possible by arrangement.

A roller straightening machine is offered. Working width: approx. 100-120mm, max. material thickness: approx. 0.1-1.0mm, multi-roll system, 4 integrated ARKU precision dial gauges, inspection is possible by arrangement.