other metal working machines used for sale (12,032)

1 press system, manufacturer Exner, type EXSBZRD 500/100, built in 2002, drive power 121 kW, pressing force 5,000 kN, overhauled in 2018, stroke length max. 600 mm, working speed max. 16/30 mm/s, machine weight 82,000 kg, table size approx. 1,000 x 3,000 mm, control system, manufacturer Siemens, type Simatic Multipanel, separate two-hand control, upstream light barrier, manufacturer Sick, separate control panel, manufacturer Rittal, control system, manufacturer Siemens, type OP17, feed unit, manufacturer AMT, type WV400/160, year of manufacture 2008,control panel, control unit, manufacturer Rexrodt, separate switch cabinet system, additional transfer unit/material feed, vertical material buffer, 6-fold feed-through unit, oiling, manufacturer Ratiol/Stöber Find more here - / Contact us at -

1 hydraulic double-column press (11), manufacturer: Exner, type EX100SBZR, built in 1988, power 42 kW, pressing force 1,000 kN, GG 11 Exner, type EX100SBZR, built in 1988, SN 10094, power 42 kW, pressing force 1,000 kN, GG 11,000 kg, overtravel 26 mm, table size approx. 900 x 1,100 mm, swivel chair, separate control panel, control system, manufacturer Siemens, touch panel, two-hand operation, manufacturer Sick, type XY2SB, front material feed, linear travel, approx. 1,000 mm Find more here - / Contact us at -

1 eccentric press, manufacturer Weingarten, type AR125, built in 1970, serial number 120526, pressing force 125 t, ram stroke 20 - 120 mm, ram adjustment 100 mm, sheet thickness max. 13 mm, two-hand operation, swivel chair Find more here - / Contact us at -

1 eccentric press (23), manufacturer Heilbronn, type EP50, built in 1986, pressure force 500 kN, stroke 8 - 100 mm, stroke rate 140/min, ram adjustment 50 mm, drive power 3 kW, GG 3,000 kg, two-hand operation, swivel chair Find more here - / Contact us at -

1 hydraulic double-column press, manufactured by Exner, type EX80SB, built in 1987, power 15 kW, pressing force 800 kN, GG 5,300 kg, overtravel 38 mm Find more here - / Contact us at -

1 hydraulic double-column press (5), manufactured by Exner, type EX40, built in 1982, , power 7.5 kW, pressing force 400 kN, GG 2,050 kg, overtravel 50 mm, two-hand operation, light barrier system, manufactured by Sick Find more here - / Contact us at -

1 hydraulic double-column press, manufacturer Exner, type EXSBR200F, built in 1996, power 50 kW, pressing force 2,000 kN, GG 16,000 kg, overtravel 42 mm, two-hand operation, light barrier system, manufacturer Sick, table size approx. 800 x 1,200 mm, swivel chair Find more here - / Contact us at -

CONTROLS  electronic controls ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1500 mm  space requirements -front/back-: 1250 mm  total height: 2100 mm- Polishing cell C710 (1970 houres in production)Equipment of the machine:Collaborative UR3 e-series robot with intuitive HMIAutomatic compensation for tool wearPolishing station Crevoisier C5100 (drive polishing tools)Spindle for holding standard Crevoisier colletsIntegrated suction with 14m/sRenishaw measuring probe for position detectionPalletizing for approx. 40 STK 2 Pal.Two polishing paste dispensers with a capacity of three liters each

upper amp; lower Wila tooling 5 axes: X / X´ / R / Z1 / Z2Capacity: 50 ton x 2550 mm Backgauge: CNC Control: TS3 Passage between uprights: 2550 mm Max stroke: 265 mm Max distance between table -- ram: 515 mm Locking speed: 90 mm/sec Working speed: 20 mm/sec Returning speed: 90 mm/sec Electric motor (power): 9 kW Length: 3400 mm Depth: 1850 mm Height: 2820 mm Weight: 5 ton

Table 6000 x 3000 x 400 mmThickness: 400 mm Length: 6000 mm Large: 3000 mm Weight: 22 ton

width of chamber: 650 mmdepth of chamber: 550 mmheight of chamber: 450 mmoperating pressure: 10 barThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 160 mmtable width: 130 mmgrinding wheel diameter: 250 mmtotal power requirement: 1 kWweight of the machine ca.: 1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 175 mmtable width: 110 mmgrinding wheel diameter: 500 mmtotal power requirement: 1 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Nikon V-12BDC was manufactured in 2019. It features a 305 mm screen diameter, a measuring stage of 250 × 150 mm, and integrated XY and angle digital displays for precise measurements. The machine includes a 3-position objective turret for quick magnification changes and high-quality halogen illumination for clear imaging. Ideal for production control and precision mechanics. Contact us for more information about this machine.

CNC press brake Type: TruBend 1225 Manufacturer: Trumpf Year: 2023 CNC touch panel 4 axis controled Pressure: 225 t Working length: 4000 mm Stroke: 205 mm Max. pressure: 300 bar Machine weight: 15,200 kg Power consumption: 30.0 kVA Power supply: 400 V / 50 Hz Machine in very good condition, under power Find more here - / Contact us at -

turning diameter: . mmturning length: . mmswing diameter over bed slide: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Serial Number: 075388 Year of Make: 2007 X 800mm Y 1000mm Z 700mm Measuring head SP80

Pero Washing Machine 2600/016GR.2W-4667

Key data: 18

Machine name: Rotary Transfer Machine Pfiffner HB45 - 18 Hour Manufacturer: Pfiffner Machine number: HB45 Year of construction: 2006 Condition: used Functionality: Fully functional

Machine name: 3D Printer Manufacturer: DMG MORI Model: Lasertec 30 SLM Year of construction: 2018 Condition: as good as new (used)

IBG P/N11278-S/N 101 3.1. Physical Specifications Dimensions (L x W x H): approx. 0.85 m x 0.52 m x 0.55 m Weight: approx. 60 kg (of which 5 kg for the eddyliner®) 3.2. Power supply Mains voltage: 230 V, Frequency: 50 Hz, Power consumption: 300 VA, Pre-fuse (max.): 16 A, Power supply: IEC C13 plug according to IEC 60320 3.3. Operating conditions Ambient temperature: 15 °C to 40 °C, Humidity: max. 80% RH (non-condensing), Operating altitude: max. 2000 m Environmental conditions: Clean, oil- and dirt-free environment 3.4. Component Specifications Shaft geometry: Diameter Ø10 mm – Ø15 mm (without cone or groove), Length 80 mm – 150 mm Specified component types (at the time of receipt and delivery): Ø10 mm and Ø12 mm () --

Broaching machine Karl Klink Technical data can be found in the photo

Guild Master and Knoll Deep Hole Drilling Machine Technical data can be found in the photos

Online Auction Three-coordinate CNC measuring machine in gantry design Manufacturer: Hexagon Metrology Type: Global Advantage F 203315 YOC 2007 Measuring paths X/Y/Z: 2000/3300/1500 mm Max. workpiece weight: 6500 kg Accessories: Renishaw PH10MQ switching probe, pushbutton kit 7, software This machine is part of the following online auction: Fixed assets of a mechanical engineering company that become available In the name and on behalf of the beneficiaries, we are auctioning 170 lots online Among others, the following will be called: Pos. 278: 5-axis CNC bed-type milling machine Heitec GmbH Auerbach ... Pos. 222: 5-axis CNC bed-type milling machine Heitec GmbH Auerbach ... Pos. 393: Three-coordinate CNC measuring machine in gantry design... Pos. 231: CNC vertical/horizontal machining center... Item 216: 5-axis CNC machining center Hedelius RS 100 Surcharg ...

Specifications: Screw ø 25 mm Screw speed (max.) 600 rpm Procedure length 47D Continuous use temperature (max.) 420° Equipment/accessories: Gravimetric dosing system, 2x Brabender Side feeder double-shaft, type SF25FuKI with stirring point funnel Process Monitoring Melt Pressure and Temperature Measurement Process Observation ULTRA GLIDE Version Process degassing vacuum system Cooling water connection on site Other accessories Pair of interchangeable screws

Manufacturer: PEAFFER Model: P160 H/I Power: 8 HP Voltage: 380 V Phase: 3 Frequency: 50 Hz Find more here - / Contact us at -

x-travel: 800 mmy-travel: 700 mmz-travel: 550 mmControl: Heidenhain TNC 530 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 6000 mmwidth: 2500 mmheight: 2580 mmFoot: 20 Container: Glou 234341 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 6000 mmwidth: 2500 mmheight: 2580 mmFoot: 20 Container: HL XU 2027 33 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.