sheet metal working used for sale (3,227)

Shearing/Punching Machine PEDDINGHAUS 210 SUPER 11 Throat depth: 305 mm Maxi punching capacity: 40 T Power: 3 kW Punching capacity: Ø 20 x 15 mm - Ø 90 x 5 mm (see abacus) Shearing capacities: (see abacus) Round shearing: Ø 34 mm Square shearing: 30 x 30 mm Angle shearing capacity: 100 x 10 mm 1 side for shearing/undercutting - 1 side for punching Delivered with some punches Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1800 mm Weight: approx 1,2 T

: neu : ca. 4 Monate ab Auftragse : 1030 mm: 10 mm: 6 mm: 10 1/min: 3 °: 7 : 5000 mm: 11 kW: 100 l: 900 mm: 1550 mm: 1150 mm: 1600 mm: 1900 kghydr. drive unit, completely integrated in the machine bodyoverload safety, hydraulic and electricaladjusting of the cutting angleadjusting of the cutting gapblank holder pressure, adjustablesupport arm with angle stop and scale up to 600 mm4 rotating knives for VA steelmovable pedal switch with solenoid valvesMotorised backgaugeCentral lubricationexchangeable machine table supportsection area lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 25200 €: 481.32 €: 1050 mm: 2.5 mm: 2.5 mm: 2 mm: 90 mm: 4,5 m/min: 2.2 kW: 2250 mm: 1000 mm: 1500 mm: 900 kgFOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE)4 rollsNC control with touchscreenTop roll driven by hydromotor and plantary gearboxHydraulic drop endMobile control panelHardened rollsOperating manual in English or GermanOPTION:Feeding table price on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 9193 Type: EasyCut 6001.20PG Producer: MicroStep Created: 2007 Parameters: Motor power: 2 kW Work table length: 6000 mm Work table width: 2000 mm Minimum sheet thickness: 38 mm Plasma Source: Hypertherm HySpeed HSD 130 Machine weight: 2700 kg

Technical details Manufacturer: EVG Model: RA-XE 16/5 Type: Automatic reinforcing steel straightening and bending machine Year: 2000 Wire/rebar diameter range: 6–16 mm Number of rotors: 5 Number of payoffs: 5 Maximum bending length: 15,000 mm Configuration: - Multi-coil feeding system - 5 payoff stations - Automatic wire feeding system - Rotor straightening technology - Multi-line feed capability - Automated wire guidance system - Programmable bending head - Automatic length measurement - Automatic shape production Control system: - Computerized production control software - Length programming - Shape programming - Job storage and production management Application: - Reinforcing steel processing - Rebar straightening - Rebar bending - Precast concrete production - Construction reinforcement manufacturing Condition: Used, good industrial condition Observed condition: - Complete installa ...

Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Container rotating device: Welding rotating device -Drive motor: 0.4 kW -Load capacity: 6500 kg -Roller spacing: 290 - 940 mm, rollers Ø 250 x 145 mm -Rolling speed: 0.20 to 1.25 m/min Right/Left rotation -Control unit: Manual control -Individual components: see photos -Transport dimensions: 1070/835/H800 mm / 1020/680/H3270 mm Total weight: 858 kg

This 4-axis Baykal APHS 31440 press brake was manufactured in 2020. It features a pressing force of 440 tons, a bending length of 3100 mm, and a stroke length of 330 mm. With a motor power of 35 kW and a machine weight of 23500 kg, it includes CNC crowning and a European clamping system. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 31440 machine we have for sale. Contact us for more information.

sheet width: 2540 mmplate thickness: 2,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 1,60 tdimensions of the machine ca.: mManual back gauge up to 550 mmSide gauge and table extensionsSharpened bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 6-axis Baykal BPM-T 1525X30 was manufactured in 2020, featuring a robust 30-ton hydraulic punching force and a versatile tooling system with 20 stations and indexable tool holders. It supports a working range of 3000 × 1500 mm and rapid axis speeds (X: 100 m/min, Y: 80 m/min). Equipped with Bosch MTX CNC control and Lantek CAM software, it ensures precision and efficiency. If you are looking to get high-quality punching capabilities, consider the Baykal BPM-T 1525X30 machine we have for sale. Contact us for more information.

sheet width: 2540 mmplate thickness: 2,50 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 2,00 tdimensions of the machine ca.: mMotorized backgauge with flip-up stops, up to 1500 mmMultiple program sequences with varying bending angles and stroke heights possibleMultibend 2000 control systemGround bending beamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis TRUMPF TruLaser 3030 L20 was manufactured in 2015. It features a powerful TruFlow 3200 CO2 laser with a laser power of 3200 W, making it suitable for various cutting applications. The machine has been utilized for 82,247 working hours, ensuring reliability and performance. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 L20 machine we have for sale. Contact us for further details.

sheet width: 3240 mmplate thickness: 5,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 5,70 tdimensions of the machine ca.: mUpper Beam Stroke: 350 mmProgram control via touchscreen (back gauge, bending angle adjustment,upper beam stroke, sheet thickness, piece count, etc.)Motorized height adjustment of the bending beam(for sheet thickness setting)Manual and automatic modes availableControlled back gauge with spring-loaded fingersCentralized lubricationVarious additional bending and reinforcement railsOperating manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press brake manufactured in 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 features a maximum press force of 1700 kN and a stroke length of 445 mm. It includes the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 5000 press brake we have for sale. Contact us for further details.

This TFM GM-SB-38CNC-2A1S was manufactured in 2019. It features a max bending capacity of 38 × 2 mm, bending speeds up to 65 °/sec, and motor power of 4 kW. Ideal for precise bending with a max bending angle of 180° and effective length over mandrel of 3200 mm. Consider the opportunity to buy this TFM GM-SB-38CNC-2A1S profile bending machine. Contact us for more information.

This 5-axis MAVIJET MJT-W53D-4020 was manufactured in 2020, featuring a CNC 5-axis, bridge type design for precision waterjet cutting. It includes a high-pressure pump operating at 4000 bar and a rapid traverse speed of 30000 mm/min. The machine supports a cutting size of 4000 × 2000 × 250 mm and is equipped with a smart abrasive reserve tank. If you are looking to get high-quality cutting capabilities, consider the MAVIJET MJT-W53D-4020 machine we have for sale. Contact us for more information.

This 4-axis Baykal APHS 31120 press brake was manufactured in 2020. It features a 120-ton press force, a bending length of 3100 mm, and a Delem 66t CNC control unit for precise operations. The backgauge X range extends to 1000 mm, and it includes European clamping with a sectioned punch and die. Consider the opportunity to buy this Baykal APHS 31120 press brake. Contact us for more information about this machine.

This 4-axis Baykal BPS-3006 was manufactured in 2020, featuring a CNC Plasma Cutting Machine with a cutting table size of 3000 × 6000 mm. It includes a rotary axis for tube and pipe cutting and is equipped with a Hypertherm HPR 130XD plasma source. If you are looking to get high-quality cutting capabilities, consider the Baykal BPS-3006 machine we have for sale. Contact us for more information about this machine.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 45700 €: 872.87 €: 2035 mm: 6.5 mm: Hydraulisch : 135 °: 3300 mm: 1550 mm: 1900 mm: 3710 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Smallest bending diameter 640 mm- Pressing force against upper roll 5800 kN- Conical bending attachment- Central lubrication- Equipped for change rolls

: neu : ca. 6 Monate ab Auftragse : Taiwan : 51100 €: 965.79 €: 3100 mm: 3.5 mm: Hydraulisch : 135 °: 4300 mm: 1770 mm: 1890 mm: 4520 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2012 : 9403 : prompt, Zwischenverkauf v : China : 180 €: 1 : 1/4, 3/8, 1/2 mm: 4 kgoperation by hand lever and eccentric3 tube diameter combined in oneassembling and welding of tubesin 90 degrees angleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 1650 mmmaterial thickness: 3,00 mmno. of straightening rolls: 21 Control: sheet thickness - min.: 0,50 mmdiam. of the rolls ca.: 50 mmbetween stands ca.: 1720 mmrun-in height: 1250 mmtotal power requirement: 45 kWweight of the machine ca.: 24,50 tdimensions of the machine ca.: m6-HIGH LEVELER / Strip Leveler / with Quick-Change System- 18 Back-up Supports- Digital Roll Adjustment (0.01 mm resolution)- Gearbox renewed in 2021- Quick-Change SystemThe quick-change system is mounted on a sliding plate. This sliding plate—on which the leveling rolls as well as the entire back-up support assembly are mounted—can be extended, allowing for quick and easy roll replacement in an easily accessible position.The extension and retraction of the sliding plate are hydraulically actuated. Connection to the drive mechanism is automatic.- Intermediate RollsThe intermediate rolls preve ...

material width: 1500 mmmaterial thickness: 3,00 mmno. of straightening rolls: 23 between stands ca.: 1530 mmthickness min. approx.: 0,50 mmdiam. of the rolls ca.: 47 mmstraight. speed ca.: m/ minbarrel length ca.: 1560 mmtotal power requirement: 23 kWweight of the machine ca.: 9,00 tdimensions of the machine ca.: 4,30 x 1,80 x 2,60 mFeatures:- Maximum vertical roller spacing: 20 mm (Note: Scale only extends to 15 mm)- 5-point lower support with support rollers (individually adjustable)- 5-point upper support with support rollers- Lower roller crowning- Circulating lubrication for gearbox and universal shafts- Infeed and outfeed tables included- Reversible operation- Centralized grease lubrication for straightening roller bearings- MITSUBISHI ELECTRONIC frequency inverter- Drive motor: 22 kW- Drive motor features a simple On/Off switch- Oil pump features a simple On/Off switch- Manual he ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 6400 mm: 1.5 mm: 2 mm: 6 ELECTROCINEMATIC DRIVE OF THE BENDING JOINTSmillmeter precise adjustment of the clamping beamBMS MULTI-Touchcontrolelectric powered rotary shearelectronic depth stopflexible material supportsinclined bending beamoptimized geometry of the clamping beamsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Extended depth 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request clamping beam made out of hardox price on requestPrices ex works Germany.Transport and commissioningat customers place on request.The data for this ad was created with ModulMWS - the software solu ...

: gebraucht : WA0147 : 890 €: 1 : 3050 mm: 105 mm: 85 mm(screwed 5x from above)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 74000 €: 1398.6 €: 1350 mm: 0,5 - 170 mm: 1370 x 2200 mm: 4000 m³/h: 200 mm: 6 bar: 78 (+/-2) dB: 1750 mm: 2100 mm: 2180 mm: 2000 kgWITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOPMachine made of stress-free welded steel construction for stable and rigid structure.Work table with motorised height adjustment via 4 synchronised spindles.Independent drive motors for each work group.Bonnets for extraction inside the machine, one per station.Touch screen for-Automatic star-delta connection of the main motors- Analogue ammeter for each group- Digital display for sheet thickness with decimal point tolerance- Material thickness adjustment (+/- 0.1 mm)- Machine condition monitoring with alarm messagesFEEDING SYSTEMRobust steel structure, wear-resistant surface.Vacuum conveyor belt on requestVariable feed speed via frequency co ...

: neu : ca. 6-8 Wochen ab Auftrag : Türkei : 12900 €: 247.68 €: 40 to: 285 mm: 200x24 mm: 660x1250 mm: 250 mm: 80 mm: 10 mm/s: 10 mm/s: 4 kW: 930 mm: 1250 mm: 650 mm: 1250 mm: 1100 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 57900 €: 1094.31 €: 1 : 650 mm: 0,5 - 170 mm: 670 x 2200 mm: 4000 m³/h: 120 mm: 6 bar: 78 (+/-2) dB: 22 kW: 2600 mm: 1350 mm: 2100 mm: 1125 kgWITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOPMachine made of stress-free welded steel construction for stable and rigid structure.Work table with motorised height adjustment via 4 synchronised spindles.Independent drive motors for each work group.Hoods for extraction inside the machine, one per station.Touch screen for-Automatic star-delta connection of the main motors- Analogue ammeter for each group- Digital display for sheet thickness with decimal point tolerance- Material thickness adjustment (+/- 0.1 mm)- Machine condition monitoring with alarm messagesFEEDING SYSTEMRobust steel structure, wear-resistant surface.Vacuum conveyor belt on requestVariable feed speed via freq ...

X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible.

This 3-axis TRUMPF Trumark Station 5000 was manufactured in 2008. It features maximum workpiece dimensions of 680 mm x 500 mm x 700 mm and a traverse path of 500 mm on the Z-axis. The machine has a maximum workpiece weight of 50 kg without the X/Y axis. If you are looking to get high-quality laser marking capabilities, consider the TRUMPF Trumark Station 5000 machine we have for sale. Contact us for further details.