sheet metal working used for sale (3,227)

: neu : 2023 : 9656 : prompt, Zwischenverkauf v : Türkei : 2600 €: 1 : 1 : 1050 mm: 1 mm: 56 mm: 1400 mm: 700 mm: 1120 mm: 185 kg3 Walzenasymmetric rolls - prebendinglongitudinal grooves in lower and lateral rollInfeed of the lower roller by a central lever - with gear reductionmachine standuser manual in GERMAN orENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 14700 €: 282.24 €: 1550 mm: 4 mm: 140 mm: 3,5 m/min: 2.2 kW: 2700 mm: 750 mm: 1000 mm: 1420 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS (PRICES ON REQUEST):hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5200 €: 100.36 €: 1270 mm: 1.5 mm: 75 mm: 1.5 kW: 1830 mm: 700 mm: 1160 mm: 400 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by ratchet leverlongitudinal grooves in lower and lateral rolltiltable upper rollright / left rotation with double foot switchuser manual in GERMAN or ENGLISHOPTION (PRICE ON REQUEST):hardened rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 98600 €: 1863.54 €: 3100 mm: 16 mm: 16 mm: 13 mm: 16 mm: 14 mm: 12 mm: 300 mm: 300 mm: 240 mm: 50 mm: 1140 mm: 18.5 kW: 5310 mm: 1660 mm: 1140 mm: 11100 kg4 rollsfully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear boxhydr. side rolls positioning with electronical synchronisationhydr. lower roll feed with mechanical synchronisationadjustable pinching pressurevariable rolling speedhardened rollsconical bending devicehydraulic drop-end bearingmoveable control paneloverload protectionuser manual in GERMAN or ENGLISHaccording to CE rulesOPTIONAL:NC controlupper and lateral supportsIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 21900 €: 420.48 €: 80 to: 285 mm: 300x25 mm: 750x1425 mm: 300 mm: 105 mm: 10 mm/s: 10 mm/s: 10 kW: 930 mm: 1430 mm: 750 mm: 1450 mm: 1700 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0043 : 129 €: 1 : 835 mmPhase: 1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Guillotine shears Schröder with hand depth stop Price Net shipping possible

Key data: 3000 mm, 2 mm

Fasti Swivel bending machine 3mx2mm with hand depth stop in top condition. Price net, shipping possible

Griebel feed straightener with automatic length measurement. The machine has 6 straightening rollers, length measurement and shear. Price Net shipping worldwide possible.

CONTROLS  CNC controls WAFIOS TECHNICAL SPECIFICATION  Max. diameter of tube: 12.7 mm  Max. wall thickness: 1 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2810 mm  space requirements -front/back-: 1350 mm  total height: 1380 mm  total weight approx.: 2600 kgTechnical Specifications:- 3-axis bending head- 3-axis gripper- Tube diameter, max. 12.7 x 1 mm- Wire diameter, max. 8 mm- Single stroke: 750 mm- Bar length: up to 2500 mm- Pneumatic gripping pliersProgramming: Graphical interface

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12630 €: 242.5 €: 0.4 - 2 mm: 200 mm: 300 mm²: 63 mm: 150 m/min: 10 m/s²FESTO pneumatic systemSIEMENS servo drive and control system7’ colour touch screen SIEMENS2 feed rollersOption:Handwheel and Simlinx remote maintenance module € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis TRUMPF TruLaser 3030 was manufactured in 2011. It features a working area of 3000 x 1500 mm and a laser power of approximately 5–6 kW. The machine is designed for high-performance industrial CO₂ laser cutting, providing stable and precise cutting performance for serial production. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 CO₂ laser cutting machine we have for sale. Contact us for further details.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 27800 €: 530.98 €: 3030 mm: 4 mm: 4 mm: 2 mm: 180 mm: 4 kW: 4600 mm: 1120 mm: 1020 mm: 4250 kg3 rollsAsymmetrical rolls arrangement - with pre-bending2 driven rollsMotorized adjustment of lateral and clamping rollDigital read-out for lateral and clamping rollSwiveling top roll to the frontForward/reverse runHardened rollsMoveable control panelUser manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12150 €: 233.28 €: 0.4 - 2 mm: 100 mm: 200 mm²: 63 mm: 150 m/min: 10 m/s²FESTO pneumatic systemSIEMENS servo drive and control system7’ colour touch screen SIEMENS2 feed rollersOption:Handwheel and Simlinx remote maintenance module € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 36800 €: 702.88 €: 3200 mm: 1 mm: 0.6 mm: 15 mm: Motorisch : 155 °: 110 mm: 4500 mm: 2100 mm: 1650 mm: 2900 kg: 750 mm: 300 mm/s: 0.1 +/- mm: 20 mm: 100 °/sek: 90 mm/sCNC CONTROL WITH TABULAR PROGRAMMING- 15,6", touchscreen controller on swivel arm- tabular programming by entering the axes values- open or drop hemming function- multi radius bending function as by pressing or by bending- programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length- piece counter- autorisiation with password- 128GB HDD allows almost unlimited data storage- remote service connection via WLAN- detailled alarm, tool and paramter pageBACK GAUGE 750 MMwith servo drive, pull back sliders to create space for down flanges at the back of the bottom tool, ball castersupper  ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 4010 mm: 1.5 mm: 2 mm: 4 ELECTROCINEMATIC DRIVE OF THE BENDING JOINTSmillmeter precise adjustment of the clamping beamBMS MULTI-Touchcontrolelectric powered rotary shearelectronic depth stopflexible material supportsinclined bending beamoptimized geometry of the clamping beamsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Extended depth 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request clamping beam made out of hardox price on requestPrices ex works Germany.Transport and commissioningat customers place on request.The data for this ad was created with ModulMWS - the software solu ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 47600 €: 909.16 €: 3100 mm: 2.5 mm: Hydraulisch : 135 °: 4300 mm: 1770 mm: 1890 mm: 4000 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sell MUBEA profile shears with hole punch, Profile shears for angle, square, round, and flat steel with notching device.By hand and Foot trigger. Machine is in very good condition Condition. Cutting force 350kN. Cutting force for Sheet metal 150x13mm, hole punch 28mm in 10pcs Sheet metal, angle steel up to 90x8, round steel up to 30mm, square steel up to 24mm (steel up to 400N /mm). For this purpose, various Hole and slotted hole stamp.

This BLM Adige LT8 4kW Co2 was manufactured in 2014. It features a Rofin DC035 3.5kw laser source and is equipped for tube cutting with a 3D cutting head. It handles materials up to 12mm thick and 206mm round, with lengths up to 6500mm. Consider the opportunity to buy this BLM Adige LT8 4kW Co2 tube cutting machine. Contact us for more information about this machine.

: gebraucht : WA0039 : 180 €: 1 : 415 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29460 €: 562.69 €: 0.4 - 4 mm: 100 mm: 400 mm²: 80 mm: 75 m/min: 10 m/s²: 10 Nmhelical gear boxWATTDRIVE (Made in Austria)FESTO pneumatic equipmentservo drive and control SIEMENS7", colour touchscreen SIEMENS2 driven rollsOPTIONAL EQUIPMENTHandrwheel and Simlinx remote control € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 6200 mm: 1.5 mm: 2 mm: 1.5 mm: 7 : 7 : 1130 mm: 180 mm: 915 mm: 4 kW: 7380 mm: 1435 mm: 1980 mm: 3700 kg: 145 °hydraulic drivestandard controladditional rail on the bending beam2x foot pedalremoveable material supportsafety equipment accoring to the control rules BG GermanyOPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany.Transport and commissioningat customers place on request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 4010 mm: 1.5 mm: 2 mm: 1.5 - 2 mm: 3 : 3 : 1000 mmFully automatic bending in two ways without the need to rotate the sheetHydraulic driveBMS MULTI-Touch with automatic depth stopPowered rotary shearAdditional rail on the bending beamMaterial support2x foot pedalSafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gr ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12100 €: 232.32 €: 2500 kg: 1300 mm: 450 mm: 550 mm: 600 mm: 50 mm: 80 mmmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlALTERNATIVES (PRICES ON REQUEST):Version with pneumatic pressure armVersion with brake, without motor, with or withaout pneumatic pressure armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 31080 €: 593.63 €: 0.4 - 3 mm: 400 mm: 1200 mm²: 80 mm: 75 m/min: 10 m/s²: 10 Nmhelical gear boxWATTDRIVE (Made in Austria)FESTO pneumatic equipmentservo drive and control SIEMENS7", colour touchscreen SIEMENS2 driven rollsOPTIONAL EQUIPMENTHandrwheel and Simlinx remote control € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1 Bending tools with excellent value for moneyInduction hardened, with ground working surfacesStandard lengths: 835 mm, 415 mm and 835 mm (split).For tool clamping systems such as: Amada, Promecam, Euro, Durma, Baykal, Ermaksan, Dener and many moreThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1988 : 070008 : prompt, Zwischenverkauf v : Deutschland : 1200 €: 1 : 400 mm: 700 mm: 1500 mm: 2050 mm: 820 mm: 1000 mmwith brakeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 6400 mm: 1.5 mm: 2 mm: 1.5 - 2 mm: 5 : 5 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gr ...

CNC Punching Machine manufactured in 2005. This DANOBAT P1631 features a punching force of 30 tons and can handle a maximum sheet thickness of 6 mm. It includes an automatic loading system, servo-driven axes, and a hydraulic punching system. If you are looking to get high-quality punching capabilities, consider the DANOBAT P1631 machine we have for sale. Contact us for further details.

Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, roller stand rotating device -Roller stand: Container rotator without drive, 2 pieces -Roller spacing: 220 mm -Rollers: Ø 185 x 117 mm -Load capacity: kg -Dimensions each: 1070/200/H240 mm -Submission/Price: complete -Transport dimensions: 1070/410/H240 mm -Weight: 265 kg