sheet metal working used for sale (3,366)

sheet width: 3060 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdistance between columns: 3100 mmdown holder: 16 Stückno. of strokes: max. 10 - 15 Hub/minoil volume: 160 ltr.cutting angle: 1.6 °back stop - adjustable: 6.0 - 750 mmControl: ELGO P9521 total power requirement: 18.5 kWweight: 6300 kgrange L-W-H: 3900 x 2300 x 1630 mmFeatures:- Robust electro-hydraulic swing beam shear- ELGO digital display model P9521, for electric backgauge Backgauge travel X = 750 mm Backgauge-free ball screw drive Travel speed 100 mm/s- 1x stable side stop With T-slot, flip-stop, and millimeter scale- 2x stable front support arms- Electric cutting length limiter Cutting length limiter to increase the stroke rate/min.- Manual cutting gap adjustment Centrally operated on the right side stand- Front support plates- Front finger/interference guard- Inching operation with push buttons on the left c ...

plate thickness: 6,0 mm STplate thickness: 4,0 mm VAtable-size: 780 x 1000 mmblade length: 200 x 200 mmstrokes per minute: 60 minengine output: 3 kWweight of the machine ca.: 1100 kgdimensions of the machine ca.: 1400 x 800 x 1300 mmFeatures:- Electro-hydraulic notching machine- 3x locking precision stop- Adjustment range 30 - 120 degrees, adjustment with the 2x front hand wheels- Electric stroke adjustment via digital display- Replacement blade (used)- Machine light- Side cut material ejection- Freely movable foot switch- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1200 kgtable turning speeds: 80 - 1600 mm/min.roll diameter: 200 x 50 mmworkpiece diameter: 20 - 800 mmrange L-W-H: 520 x 470 x 390 mm Antriebrange L-W-H: dito mm Mitläufervoltage: 230 V / 50 Hzweight: 56.0 kg current new price approx. 3,000 euros special price on requestProduct description:- For processing cylindrical workpieces- Flat frame- Swivel castors with polyurethane coating- Clearly arranged operating elements- Infinitely variable speed- The control electronics are protected by a robust and. enclosed housing- With foot switch for start/stop- Drive with DC electric motors and gearboxThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40.0 tchamfer lenght: 1270 mmdistance between columns: 1000 mmcolumn arm: 200 mmstroke: 100 mmdayligth: 308 mmajustment speed: 150 mm/secworking feed: 1-10 mm/secreturn speed: 100 mm/sectable width: 100 mmtable height: 900 mmcontrol: DNC 60 PS oil volume: 100 lvoltage: 400 Vtotal power requirement: 5.5 kWweight of the machine ca.: 2750 kg- in checked conditions - machinevideo - https://www.youtube.com/watch?v=WRzqKruFUvYEquipment:- CNC electro-hydraulic press brake- CYBELEC DNC 60 PS CNC control Swiveling control panel, front left Tool & program library- CNC electro-motorized backgauge (X-axis) X-axis travel = 800 mm 2x manually adjustable backgauge fingers (R+Z axes) Backgauge on ball screws- CNC controlled axes Y1 - Y2 - X- Rehfuß upper tool system A with quick-change clamping Additional crowning device in the tool holder- 4V universal die block with 60 mm die shoe- 2x slidi ...

sheet width: 1280 mmplate thickness: 3.5 mmbending angle max.: 180 °stroke of upper beam: 200 mmSwing beam adjustment: 30.0 mmBending time for 90°: 5.5 sekControl: konv. voltage: 380 Vtotal power requirement: 2.0 kWweight: 1180 kgrange L-W-H: 1930 x 1750 x 1175 mmFeatures:- Simple electric motor-driven swivel bending machine- Manual angle adjustment via electric potentiometer- 1x bending tool set - Manual lower jaw adjustment .. 30.0 mm- Emergency stop button on the front - 1x freely movable dual foot switch- User manual (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tpunching cross-cut in cmm: 40.0 in 22.0 mm STstroke: 120 mmcolumn arm: 760 mmtotal power requirement: 8.5 kWweight of the machine ca.: ca. 3.800 kgdimensions of the machine ca.: ca. 2500 x 1700 x 2000 mm Original price, including stop system: approx. 45.000 euros Special price available upon request Features:- Robust / heavy-duty hydraulic hole punch- Punch stroke continuously adjustable- NC stop system MUBEA MATIC 82 Travel range in X and Y axes With FAGOR control unit Includes large support table Separate control cabinet - Various (custom) punching tools (see Figure 9)- Front safety guard, including sheet metal scraper- 1 freely movable foot switch- Operating instructions for machine and stop systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: -- mmworkpiece length: -- mmwork piece width: 15 mmrange of angles: 15-50 °plate thickness: 6-40 mmtotal power requirement: 1,5 kWFeed speed: 3,5 m/min.dimensions: 530 x 395 x 860 mmweight of the machine ca.: 94 kgThe UZ15 RAPID machine is one of the fastest beveling machines withautomatic feed on the market. It is not only suitable forworkshops, but also for assembly work. It has a steplessBevel angle adjustment system. Also, the machine with an automaticfeed equipped. Working with the UZ15 Rapid is therefore very convenient.- For conventional steel (up to a strength of 600 MPA/87022PSI), brass, copper and aluminum materials- For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm- Application range of sheet thickness 6 - 40 mm- The bevel angle can be easily adjusted from 15° to 50° continuously withoutthat a part needs to be replaced- Double-sided bevel (X ...

sheet width: 4100 mmplate thickness: 6.35 mmthickness at Niro-steel: 4.00 mmcutting angle: 0.5 - 2.5 °cutting gap adjustment: 0.05 - 0.8 mmno. of strokes: 9 - 26 Hub/minback stop - adjustable: 10.0 - 750 mmdown holder: 22 Stk.oil volume: 200 ltr.engine output: 7.5 kWweight: 8000 kg.range L-W-H: 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours () Current list price approx. 60.000 euros Special price upon request Features:- Robust electro-hydraulic, slide-guided sheet metal shear- LVD control panel centrally located on the front of the machine (left)- Electro-hydraulic cutting angle adjustment Includes digital display of actual values- Manual cutting gap adjustment via handwheel from the front (left) Includes analog value display- Electro-motorized backgauge with ball screws Includes digital actual position display Rapi ...

pressure: 200 tchamfer lenght: 3600 mmdistance between columns: 2650 mmdayligth: 500 mmthroat: 300 mmstroke: 250 mmworking feed: 10,5 mm/secreturn speed: 100 mm/secram stroke speed: 150 mm/sectable height: 900 mmoil volume: 500 ltotal power requirement: 37 kWweight of the machine ca.: 17800 kgdimensions of the machine ca.: 3710 x 1800 x 3390 mmEquipment:- Controlled axes Y1 + Y2- Manual X-axis with digital position display- Set of upper and lower tools- 2x stop fingers- 2x front support arms- Hand and foot controls- Side + rear safety guard- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 13.0 mmthickness at Niro-steel: 8.0 mmdown holder: 14 Stückno. of strokes: max. 11 Hub/mincutting angle: 1°15 work height max.: 770 mmcolumn arm: ? mmoil volume: 300 ltr.control: konv. total power requirement: 15.0 kWweight: 11800 kgrange L-W-H: 4255 x 2250 x 2400 mmFeatures:- Robust electro-hydraulic swing pruning shears- Operation, swivels to the front left- Electro-motorized backgauge on recirculating ball screws Movement by push-button (forwards backwards) including ELGO digital position indicator- Manual quick cutting gap adjustment by eccentric (right side stand)- Machine stand with overhang- 1x long side stop, with mm scale- 2x front support arms, with mm scale- Ball rollers in the front support table- Hinged front finger guard- 1x free-moving foot switch- Rear safety device (protective grille)- 2x front emergency stop button- Operating instr ...

working width: 950 mmworkpiece width - max.: 1,0 - 50 mmsandingbelt width: 970 mmsandingbelt length: 1900 mmweight of the machine ca.: 1,8 tThe SMD 123 RE is a universal entry-level machine for all-round deburringUniform edge rounding and surface grinding of sheet metaldry process. Suitable for processing steel, stainless steel and aluminium. The non-slip conveyor belt enables safe transport and theMachining even of small workpieces. The two rotor heads ensure an all-round uniformEdge rounding and a directionless finish. The intuitive operation via touch panel allows every employeeget to grips with the machine quickly. The SMD 1 models are installed and ready for operation in a short time. The compact design saves valuable production space. Low acquisition and operating costs lead to shortamortization periods and guarantee economical processing of yourworkpieces.consisting of:- Grinding  ...

sheet width: 1050 mmplate thickness: 4.0 mmthickness at Niro-steel: 3.0 mmdistance between columns: 1200 mmblade length: 1150 mmno. of strokes: 46 - 69 Hub/mincutting angle: 1.30 °Control: konv. oil volume: 100 ltr.total power requirement: 5.68 kWweight: 1100 kg From a maintenance workshop In good condition ()Features:- Robust electro-hydraulic sheet metal shear- Electric motor-driven backgauge Backlash-free ball screw for backgauge Travel speed 100 mm/sec- Electric cutting length limiter Cutting length limiter to increase the stroke rate per minute- Manual cutting gap adjustment (lateral adjustment)- Front support table with recessed grips- Front finger/interference guard- 1x side stop with T-slot and millimeter scale- 2x front support arms- 1x freely movable foot switch- Operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 1500 mmworkpiece width - max.: 0,5 - 50 mmdimensions: 3300 x 1500 x 1800 mmfeed stepless: 0-4 m/mintotal power requirement: 20,4 kWweight of the machine ca.: 2800 kgThe SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts.The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. It is also possible to easily connect automation solutions or integrate the machine into production lines. The machine design ensures ergonomic working and a pleasant ...

plate thickness: 0,8 mm0: 52 mmweight of the machine ca.: 30 kgProducer: SahinlerType: IK 0,8YOM: newShaft Length: 110 mmBordering Capacity: 0,8 mmRoll-Ø: 52 mmThroat Depth: 80 mmDimensions of the Machine (LxWxH): 380 x 180 x 380 mmWeight: 30 kgAdditional information: • Cast iron heavy duty main frame• Forward-backward adjustable sheet support• Easy to carry for workshops• Forward-backward adjustable bottom shaft• Rolls shafts are special steel material• 7 set of rolls standardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mmplate thickness: 3 mmtotal power requirement: 3 kWweight of the machine ca.: 1600 kgdimensions of the machine ca.: 2.060 x 1.140 x 1.210 mmProducer: OSTASType: RGM 1050 x 3YOM: newMax. Shearing Length: 1.050 mmShearing Capacity: 3 mmShearing Angle: 2°30Strokes Per Minute: 35 d/dMotor Power: 3 kWTable Width: 510 mmTable Height: 820 mmRear Gauge Distance: 500 mmDimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mmWeight: ca. 1.100 kgAdditional information: • Manual backgauge with 500 mm stroke• Squaring arm with T-slot, stopper and ruler• Foot pedal• Front sheet holding arms• Cutting line lighting• Protection Cagesoptional:• Cutting unit counter• Motorised backgauge with 500 mm stroke• Backgauge with NC control• Pneumatic Sheet Support System• Optical security bar• 0-180° angle cuttingThe data for this ad was created with ModulMWS - th ...

sheet width: 3100 mmplate thickness: 3 mmrear stop: 1000 mmdown holder: 18 Stkcutting angle: 0.5 - 1,0° 30° °oil volume: 150 ltotal power requirement: 5,5 kWweight: 4300 kgdimensions of the machine ca.: 3800 x 1950 x 1600 mmFeatures:- Manual rear stop (front via handwheel)- Manual cutting angle adjustment- 1x front support arm- 1x side stop- Front finger guard- Operating instructions (English)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1530 mmplate thickness: 4.0 mmthickness at Niro-steel: 2.0 mmno. of strokes: max. 34 Hub/mincutting angle: 2.70 Graddistance between columns: 1540 mmwork height max.: 920 mmvoltage: 400 VControl: konv. engine output: 3.2 kWweight of the machine ca.: 1115 kg.range L-W-H: 2275 x 2220 x 1400 mmFeatures:- Robust motorized swing-arm guillotine shear- Break-resistant, torsion-resistant welded steel construction- Compact and easy-to-use machine design- Manual backgauge, adjustable from the rear Stepless adjustment across the entire travel range- 1x hold-down bar- 1x freely movable foot switch- Front, extendable table extension- Rear safety device- Original operating instructions Optional accessories included:- Sheet metal holding device for thin sheet metal blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 tchamfer lenght: 4100 mmdistance between columns: 3100 mmdayligth: 425 mmthroat: 300 mmstroke: 225 mmworking feed: 10 mm/secreturn speed: 100 mm/sectable height: 900 mmoil volume: 260 ltotal power requirement: 11 kWweight of the machine ca.: 12000 kgdimensions of the machine ca.: 4400 x 1750 x 2500 mmEquipment:- Cybelec DNC 34 PC control system- Controlled backgauge 700 mm (X-axis)- Hydraulic tool clamping at the top- 2 support arms with sliding system- Upper tool- Lower tool- Side + rear safety device- 2 manual foot switchesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mmplate thickness: 4 mmwork height max.: 900 mm: 450 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4800 kgdimensions of the machine ca.: 4250 x 1500 x 1850 mmEquipment:- electric bending angle adjustment- electric upper beam adjustment- foot switch- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 8 mmdistance between columns: mmelectrical: . weight of the machine ca.: 6,3 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 300 mmmaterial thickness: 3 mmcross cut: weight of the machine ca.: 0,12 tdimensions of the machine ca.: 0,5, 1, 1 mCoil ShredderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1250 mm, 1 mm

Qty. 1 Second-hand cut-to-length line including straightening, polishing and grinding units Manufacturer: UNGERER / GEORG, EMG, IMEAS Built: 1986 / 1997 /1998 / 2009 still in operation Material: stainless steel Strip width: 500 – 1.250 mm Thickness: 0.40 – 1.00 mm Coil weight – DECOILER max.: 10.0 t RECOILER max.: 5.0 t Coil ID – Ø 500 mm OD – Ø 1.500 mm Sheet length: 500 – 6.000 mm Stacking weight max.: 4.000 kg Working speed – grinding max. 20 m/min. Working speed – grinding + brushing: 4 – 12 m/min. Working speed – brushing: 4 – 6 m/min. Working speed – cutting max.: 20 m/min. Working direction right ⇒ left Length tolerance ± 0.40 – 3.000 mm

Plasma cutting machine Satronik D300 BJ 1997

Separating tool, punching tool, punch, punch die, punch stamp, -Stamping tool: Die holder with fine adjustment -Bore: Ø 25 mm -Dimensions: see photos -Dimensions: 300/250/H210 mm -Weight: 32.1 kg

Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears -Sheet shear: hydraulic -Cutting width: 2580 mm -Maximum cutting thickness: Steel 2 mm / Aluminum 3 mm -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3020/2000/1320 mm -Weight: 3185 kg

guillotine shears, sheet metal shears, metal sheet shears, crank guillotine shears -mechanical guillotine shears -Cutting width: 2040 mm -max. cutting thickness: 2.0 mm -Equipment: back stop, side stop, 3 supports -Drive: 5.5 kW -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm -Weight: 1378 kg

Separating tool, punching tool, punch, punch die, punch stamp, -Punch tool: for holding dies -Hole: Ø 100/43 mm -Dimensions: see photos -Dimensions: 345/280/H245 mm -Weight: 55.9 kg

Cutting blades, replacement blades for guillotine shears, replacement cutting edges, cutting knives, shear blades, flat steel blades for profile steel shears, lever shears, sheet metal knives -Manufacturer: Peddinghaus, 2 cutting blades for profile steel shears 210/16 -Cutting length: 229 mm -Hole spacing: 140 mm / M18 see photos -Submission/Price: complete -Dimensions: 260/18/H70 mm -Weight: 2.4 kg

This 4-axis PLACKE QPB-4 150/3100 was manufactured in 2001. It features a press force of 1500 kN and a bending length of 3100 mm, making it suitable for various bending applications. The machine includes a mechanical crowning system and comes with a comprehensive set of tooling and accessories. If you are looking to get high-quality bending capabilities, consider the PLACKE QPB-4 150/3100 press brake we have for sale. Contact us for further details.

This 3-axis GWEIKE LF3015GA was manufactured in 2019. It features a powerful 3000 W laser and a generous working area of 3000 x 1500 mm, capable of cutting up to 20 mm steel and 12 mm stainless steel. The machine includes a robust exchange table and has a maximum moving speed of 120 m/min. If you are looking to get high-quality cutting capabilities, consider the GWEIKE LF3015GA fiber laser cutting machine we have for sale. Contact us for further details.