sheet metal working used for sale (3,361)

Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, notching unit -Dimensions: see photos -Dimensions: 150/130/H80 mm -Weight: 4.4 kg

Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, counter blade only, without notching unit -Hole spacing: 200/150 x Ø 18 mm -Dimensions: 255/200/H100 mm -Weight: 14 kg

Separating tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, die-cutting tool intermediate block -Dimensions: see photos -Dimensions: 310/17/H110 mm -Weight: 22.6 kg

Separating tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, die-cutting tool for holding dies -Bore: Ø 73 mm / Mounting Ø 90 mm / Hole spacing 90/75 mm M10 -Dimensions: see photos -Dimensions: 200/100/H120 mm -Weight: 6.8 kg

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Mubea, die-cutting tool for holding dies -Hole: Ø 35 mm -Dimensions: see photos -Dimensions: 235/105/H130 mm -Weight: 11.1 kg

sheet width - max.: 0240 mmcoil weight: 0,150 tcoil internal dia.: 320 - 520 mmcoil outside - diam. ca.: 800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m• Motor drive• Rear limit disc• Front limit ring• Switch-on delay adjustable via potentiometer• Manually adjustable brake• Loop control via contact switch on the reel baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0150 mmcoil weight: 0,150 tcoil internal dia.: 230 - 545 mmcoil outside - diam. ca.: 800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m• Motor drive• Rear limit disc• Front limit ring• Left/right rotation selector switch• Manual/automatic mode• Loop control via contact switch on the reel baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 100 t, 2600 mm

Manufacturer: ERMAKSAN Model: Speed-Bend Pro 2600×100 Year: 2022 Condition: Used Stock number: 9340 Control system: Delem DA-66T Press force: 100 t Maximum bending dimension: 2600 mm Motor power: 11 kW Machine height: 2550 mm Machine length: 4350 mm Machine width: 2500 mm Machine weight: 6273 kg Equipments: Back stop Front Support Arms Foot control Safety Covers Bending fixtures

This 5-axis TRUMPF TRUPUNCH 3000 was manufactured in 2007. It features a maximum cutting force of 180 kN, making it suitable for various punching applications. The machine has undergone major contract maintenance in February 2026, ensuring its operational reliability. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUPUNCH 3000 CNC punch press we have for sale. Contact us for further details.

This 3-axis BLM Adige LT9 Combo Fiber 3kW was manufactured in 2012. It features a maximum raw material length of 6,500 mm and can process round tubes with a diameter of up to 225 mm. The machine is equipped with a powerful 3 kW fiber laser, ideal for cutting tubes, profiles, and sheet metal. If you are looking to get high-quality cutting capabilities, consider the BLM Adige LT9 Combo Fiber 3kW machine we have for sale. Contact us for further details.

with CNC-path-control: FANUC type: 0i - MC for axes: 3 x-travel: 1020 mmy-travel: 530 mmz-travel: 560 mmtable surface area: 1200 x 500 mmtool magazin:: numbers of tools: 32 max. tool-dia with free toolbox: 75 mmmax. tool length: 280 mmmax. tool weight: 7 kgmilling head: spindle taper:: BT40 spindle turning speed - stepless: -12000 U/minPower: 15 KWrapid motion -longitudinal/cross/vertical: 32 m/mindimensions of the machine ca.: 2470 x 2540 x 2750 mmweight of the machine ca.: 7 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2010 mmy-travel: 3010 mmz-travel: 200 mmCapacity: 4000 bartable load: 1200 kg/m2feed: 10/5 m/minTable: 3000 x 2000 mmcontrol: FANUC weight of the machine ca.: tdimensions of the machine ca.: 10,3 x 4,2 x 3,25 mused CNC water cutting machine in gantry style- high pessure pump 4000 bar- cutting tool WJS Basic cutting head, abrasiv dosing device- CAD/CAM software IGEMS 2D CAD, 2D CAM and AWJ modul- pressure vessel 200 ltr./ abrasive tower 1 tonne- abrasive controling package- abrasive disposal package- Remote control software- collision protection package- nesting level 1 + 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tube cutting machine manufactured in 2024. This Bodor T2-65-3000W features advanced technology for efficient cutting operations. If you are looking to get high-quality tube cutting capabilities, consider the Bodor T2-65-3000W machine we have for sale. Contact us for further details.

Key data: 1020 mm, 6 mm

Max. sheet thickness: 6 mm steel Upper roller diameter: 150 mm Motorized rear roll infeed Clockwise and counterclockwise rotation via footswitch Safety rope pull switch Conical rounds possible Weight: 1200 kg

Max. sheet thickness: 4 mm steel, 3 mm stainless steel Adjustable angle: 30° - 120° Pneumatic angle adjustment Stroke actuation via footswitch Single stroke or double stroke adjustable via selector switch Weight: approx. 1000 kg

Key data: 2540 mm, 6 mm

Max. cutting length: 2540 mm Max. sheet thickness: 6 mm steel Motorized adjustable back gauge (2 speeds) up to 1000 mm with analogue display Side stop and table extensions Cutting length limitation Cut edge lighting Knife sharpened Weight approx. 5500 kg

FINN-POWER LP6 punch laser machine was manufactured in 2008 in Finland by FINN-POWER OY. The machine was used for machining AISI 304 and AISI 316 stainless steel sheet metal. Since its purchase, it has been regularly serviced by the manufacturer and has undergone annual technical inspections. The FINN-POWER LP6 is designed for the comprehensive machining of sheet metal with a maximum thickness of 8 mm. It enables both punching and laser cutting in a single work cycle, reducing the need for additional operations on other machines. The combination of both these technologies in a single system speeds up task completion times and increases the efficiency of the production process. The punching process is performed by means of a hydraulic cylinder, whose stroke and speed are fully numerically controlled. The ability to programme the upper stroke limit enables the punch movement to be pr ...

FINN-POWER LP6 punch laser machine was manufactured in 2008 in Finland by FINN-POWER OY. The machine was used for machining AISI 304 and AISI 316 stainless steel sheet metal. Since its purchase, it has been regularly serviced by the manufacturer and has undergone annual technical inspections. The FINN-POWER LP6 is a high-performance sheet metal machining center that combines punching and laser cutting technologies. It enables comprehensive machining of workpieces with a maximum thickness of 8 mm, eliminating the need for additional operations on other machines. The use of both these technologies in a single system reduces task completion times and increases overall production efficiency. Punching is performed by means of a hydraulic cylinder, whose stroke and speed are fully numerically controlled. The ability to programme the upper stroke limit enables the punch’s movement to be ...

This 3-axis Bystronic BySpeed 3015 was manufactured in 2006. It features a powerful 4.4 kW CO2 resonator and can accommodate a maximum sheet size of 3000 x 1500 mm. The machine includes 20 pallet positions for efficient operation. If you are looking to get high-quality laser cutting capabilities, consider the Bystronic BySpeed 3015 CO2 laser cutting machine we have for sale. Contact us for further details.

This 8-axis AMADA HFBO 100-30 press brake was manufactured in 1998. It features a maximum press force of 1000 kN and a bending length of 3100 mm, providing robust capabilities for various applications. The machine has undergone software upgrades and cylinder replacements in 2024. If you are looking to get high-quality bending capabilities, consider the AMADA HFBO 100-30 press brake we have for sale. Contact us for further details.

Key data: 40 t, 2050 mm

Hesse E 2040 - Hydraulic press brake - Cybelec DU 6000 CNC control - 3 controlled axes (Y1, Y2, X) - Manual Wila crowning table - 2 adjustable support arms - Light barriers - Incl. bending tools & operating instructions - Year of construction 2008 Technical data - Pressing capacity: 40 t - Bending length: 2050 mm - Distance between stands: 1650 mm - Rapid traverse: 150 mm/s - Bending speed: 15 mm/s - Retraction speed: 100 mm/s - Stroke: 160 mm - Projection: 350 mm - Motor power: 4 kW - Operating voltage: 3x 400 V - Oil tank capacity: 60 l - Machine dimensions WxHxD: 2800 x 2400 x 1600 mm - Weight: 4060 kg

sheet width: 3050 mmplate thickness: 10 mm: 11 kWrange L-W-H: 4000 x 2220 x 1830 mmweight: 6.300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 10 mmcontrol: Elgo 87 P2 : 11 - 31 Hub/mincutting angle adjustment: 1 - 4 °Number of hold downs: 16 Stück: 900 kg: 11 kWtable width: 700 mmtable height: 800 mmrange L-W-H: 4000 x 2220 x 1830 mmweight: 6300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tube cutting machine manufactured in 2015. This TRUMPF TruLaser Tube 5000 features a working range of 6500 mm in the X-axis and 310 mm in the Y-axis, with a maximum workpiece length of 3000 mm. It supports various tube diameters and has a maximum workpiece weight of 130 kg. If you are looking to get high-quality tube cutting capabilities, consider the TRUMPF TruLaser Tube 5000 machine we have for sale. Contact us for further details.

Manual beveling line for round tubes and bars 4-spindle deburring and chamfering machine For interior and exterior taping/chamfering Spindle speeds 70/140 rpm Material: steel, stainless steel, aluminium, non-ferrous Diameter: Ø 2 – 75 mm Min. workpiece length from 100 mm Deburring time: 3–4 sec. / front side The machine is equipped with deburring tools from the manufacturer Kopal. Tool holder is MK3 The deburring tools are adjustable so that the same chamfer depth is always achieved. Very good condition

sheet width: 2000 mmplate thickness: 3,5 mmdistance between columns: 2050 mmdaylight opening: 355 mmtotal power requirement: kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 3,5 x 1,5 x 1,5 mBending machine- Bending angle preselection via limit switchesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press brake manufactured in 2023. This GWEIKE GKS-BC0315 features a pressing force of 50 t and a maximum sheet length of 1,600 mm. It is capable of bending dimensions up to 1,500 x 1,500 x 170 mm, making it suitable for large-scale boxes and panels. If you are looking to get high-quality bending capabilities, consider the GWEIKE GKS-BC0315 machine we have for sale. Contact us for further details regarding this machine.

A hydraulic AMADA NC guillotine shear is offered. Cutting length: approx. 3050mm, max. sheet thickness: approx. 6mm, min./max. cutting angle: approx. 0.4°/2.2°, backgauge travel: approx. 1000mm, backgauge traverse speed: 100mm/s, max. stroke: approx. 160mm, max. stroke rate: 45strokes/min, control: AMADA NC control. Including sheet handling system. Machine dimensions X/Y/Z: approx. 3800mm/2250mm/2100mm, weight: approx. 6500kg. Inspection by appointment possible.

Key data: 5 t, 350 mm, 310 mm

Small Electric Table Press Brake with Spindle Drive TableOne 5 - CoastOne Made in Finland Press force: 5T Bending Length: 350mm Spindles: 1x5T Control: TC15-2D Graphics Back gauge: 1 axis controlled X axis - R axis manual Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; Available now! Viewing under power possible at any time by appointment!

Hyllus 285 three-roll manual plate bending machine for bending and calendering sheet metal.