sheet metal working used for sale (3,342)

Bending capacity: 3/8"-2" Bending angle: 180° Angle turret: 6-fold Mounted bending tool: Ø 28 mm Country of origin: Netherlands Motor power: 3 kW Machine weight: 250 kg Machine LxWxH: 1,000 x 800 x 950 mm

chamfer lenght: Gesamt ca. 1750 mmPacking: ca. 1900 x 200 mmShipping weight: 550 kg7-piece bending toolIndividual lengths approx. 100 / 155 / 180 / 245 / 255 / 300/ 510Profile approx. 20 x 20 mmHeight approx. 145 ( 165 ) mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8767 Type: Trumatic L3030 Producer: Trumpf Created: 2007, GO 2023 Parameters: Hours: 6099 h Switch-on hours: 12949 h Laser power: 3200 W Work table length: 3000 mm Work table width: 1500 mm

Inv. Num. : 8766 Type: SPITFIRE 1500 Producer: Pierce Created: 2012 Parameters: Software: Lantek Expert Duct Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 15 mm Plasma Source: HYPERTHERM 85A Machine height: 1400 mm Machine length: 3650 mm Machine width: 2520 mm Equipment: Exhaust fan

Complete coil-fed cutting and feeding line for disc production Composed of: • Feeder/Decoiler: LARA DEMAE-10000/100/1400-D • Cutter: TIMAC TZZ-1604 with double-station stacker • Shear and feed table up to 1400 mm by LARA Condition: In operation, ready for production. Designed mainly for working with carbon steel, stainless steel, and aluminum. The installation combines a servo-driven straightener-feeder from LARA with a TIMAC circular shear, scrap-cutting shear, and automatic double-station stacker, allowing for continuous, precise, and safe operation. Main components: Hydraulic motorized decoiler with loading cart and loop control via laser sensor. Equipped with safety barriers in the coil loading area for optimal visibility during the decoiling and cutting process. Combined straightener-feeder with 11 rollers and AC servomotor controlled by PLC + touchscreen HMI. TIMAC  ...

sheet width: 4040 mmplate thickness: 4,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 7,50 tdimensions of the machine ca.: mMotorized adjustable backgauge with digital display up to 1000 mmPneumatic sheet metal supportSide fence and table extensionsCut length limiterCut edge lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMotorized backgauge with digital displayManual kerf adjustmentVariable cutting lengthCutting edge illuminationNew bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 10,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 10,00 tdimensions of the machine ca.: mMotorized backgauge up to 1000 mm with digital displaySide fence and table extensionsCut length limiterCut edge lightingNote: Backgauge is slightly inaccurate (+/- 1 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Large working width: 3050 mm for sheet metal (with a strength of 45 kg) up to: 6 mm Clear stand width: 3400 mm Cutting angle adjustable by hand: 0.5 - 3° Number of hydraulic hold-downs: 18 Stroke rate approx.: 9 - 17 /min Stop adjustment: 1000 mm Hydraulic drive: 380 V, 7.5 kW Space required incl. back gauge: 3600 x 1800 x 1580 mm Weight: 5200 kg

pressure: 60 tchamfer lenght: 2050 mmdistance between columns: 1550 mmthroat: 255 mmstroke: 165 mmdayligth: 475 mmworking feed: 9,8 mm/secreturn speed: 117 mm/secajustment speed: 150 mm/sectotal power requirement: 5,5 kWweight of the machine ca.: 5000 kgdimensions of the machine ca.: 2300 x 1500 x 2470 mmEquipment:- DELEM DA65 CNC control- Electric backgauge (X-axis), 600 mm- Hydraulic upper tool clamping- Front light barrier- Side and rear protective grilles- Manually adjustable stop bar, foldable (R+Z-axis)- Upper tool- 2x support arms- Machine feet- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 350 kN (holes e.g. 23 m in 12 mm material) Cuts 150 x 10 mm on the flat steel shear Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side with stop cam Range of tools is included in the price

sheet width: 750 mmplate length: 1250 mmplate thickness: 4 mmtable surface area: 1600 x 1050 mmno. of strokes: 180 Hub/minmax. punching diameter: 105 mmpunching pressure: 25 ttotal power requirement: 4,0 kWweight of the machine ca.: 1,8 tdimensions: 1,9 x 1,9 x 1,7 mPunching and nibbling machine- Digital readout for X and Y axis- Tool cabinet with toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 2 mmdistance between columns: 1020 mmbending angle max.: 135 °total power requirement: 0 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 1350 x 850 x 1175 mMax. bending angle 135°Manually operated with auxiliary spring on both sides.Upper beam opening 40 mm,Upper and lower beams segmented,Segment division: 25-30-35-40-45-50-75-100-150-200-270 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MITSUBISHI ML3015eX PLUS laser cutting machine was built in 2019 in Japan by MITSUBISHI ELECTRIC CORPORATION. The machine, distinguished by the use of the most advanced technology available on the market, is an excellent choice for precision cutting of sheet metal made of, among others, steel, aluminium and copper. Workpieces with a maximum length of 3050 mm and a width of 1565 mm are machined by means of a reliable head with auto focus, which is powered by a 4.5 kW laser beam. The laser beam is generated by electrical discharges in a special gas mixture with a relatively slow flow and in a direction perpendicular to its axis. Real-time power monitoring, combined with a constant beam length, ensures the highest cutting quality over the entire work area and prevents power deviations of more than ± 1%, which are necessary for machining highly reflective materials. The entire machining  ...

Offer 25311 Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 /min - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Footswitch - Space requirement approx. W 1300 x H 1250 x D 1300 mm - Weight approx. 800 kg - Mobile undercarriage

plate thickness: 4 mm STplate thickness: 3 mm VAblade length: 225 mmengine output: 3,5 kWweight of the machine ca.: 650 kgdimensions of the machine ca.: 1250 x 900 x 1100 mmFeatures:- 2x miter stops- 90° fixed angle- Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8740 Type: VR 13-31 Producer: EHT Generated: Parameters: Maximum cutting length: 3100 mm Maximum cutting thickness: 13 mm

Inv. Num. : 8739 Type: TS 3006 Producer: HACO Created: 2004 Parameters: Maximum cutting length: 3000 mm Maximum cutting thickness: 6 mm

Inv. Num. : 8688 Type: Beyeler PR 150 IPC Producer: Bystronic Created: 2004 Parameters: Compressive force: 150 t Maximum bending length: 3100 mm Stroke: 215 mm Machine weight: 10000 kg Machine condition: out of order

Max. bending length: 1270 mm Max. sheet thickness: 1.75 mm steel Motorized upper bolster adjustment via foot switch Automatic backgauge

Max. bending length: 3200 mm Max. sheet thickness: 4 mm steel Motorized backgauge with hinged cams up to 2500 mm with stop extension (disassembled) Motorized bending beam adjustment Multibend 9001 controller Segmented upper beam tool with automatic tool clamping (height 100 mm) Operating instructions Weight: 5800 kg

: 3050 mm: 12,0 mm: -: 0,5-3,0 °: 1000 mmtable height: 930 mmwork height max.: 930 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KIMLA POWERCUT LF1020 fiber laser was built in 2022 in Poland by POLCOM Przemysław Kimla. The machine has worked for a total of 814 hours and is in very good condition. Laser cutting is performed by means of a stable 2 kW fibre beam, which is generated by a resonator of the highest energy efficiency. A focusing lens system inside the cutting head ensures optimum beam geometry for various types of workpieces. As a result, the edges of the machined workpieces are distinguished by their unprecedented smoothness and absence of irregularities. The entire machining process is fully automatic, thanks to the use of an automatic pallet exchange system. This system enables simultaneous loading and unloading of workpieces during cutting, thus increasing production efficiency and reducing machine downtime to a minimum. The POWERCUT LF1020 fibre laser is offered with an extensive range of equi ...

JORDI PHE-30180 CNC hydraulic press brake was built in 2013 in Spain by JORDI UNIVERSAL V.S.L. The machine, designed for precision machining of sheet metal with a maximum length of 3550 mm, is an excellent choice for any industrial plant. The combination of a high press force of 175 tonnes and an extremely stable design guarantees the best bending results, even during the most intensive challenges. All this is complemented by an intelligent CNC control with all the necessary functions. The PHE-30180 CNC press brake weighs 11000 kg. Technical specifications of the JORDI PHE-30180 press brake - CNC controller: ESA 530 - maximum press force: 175 t - maximum sheet metal length: 3550 mm - maximum slider stroke length: 265 mm - distance between columns: 2600 mm - top tool weight: 55 kg - bottom tool weight: 66 kg - light curtains - foot switch control - oil tank capacity: 250 l - ...

x-travel: 1000 mmy-travel: 600 mmz-travel: 600 mmcontrol: Heidenhain TNC 426spindle nose: 100-700 mmwork table:: 1.080 x 580 mmworkpiece weight max.: 550 kgT-slots: 7 Stk.T-slot - width: 14 mmtool piece magazine with: 36 Plätzenweight of tools max.: 8 kgtool length - max.: 340 mmtotal power requirement: kWweight of the machine ca.: 6,2 tdimensions of the machine ca.: 4.790 x 5.330 x 2.905 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used Forstner slitting line, control left, 0-line right, with motorized cross shear, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run was carried out. Working width: 250 - 1250 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminium: 1.5 mm Colour: blue/yellow Total power requirement: 400 V Machine weight: 775 kg Dimensions: 1500 x 2200 x 1500 mm Coil weight: 2 t without straightening rollers Number of blades: 5 pairs Knife shaft diameter: 100 mm Speed: 25 m/min without bevel cut Coil width (max.): 1250 mm Maschinennummer/Machine number 102728 MST

SENTE MAKINA HDTF-SI tube forming machine was built in 2022 in Turkey by SENTE MAKINA İNŞ. SAN. VE TIC. LTD. ŞTI. The machine is used in the HVAC industry for the production of precision ventilation ducts, compliant with Eurovent and Smacna standards. Spiro ducts are created from thin sheets of metal with a maximum thickness of 1 mm. The innovative cutting system eliminates the noise and hot sparks typical of traditional saws, guaranteeing smooth edges without the need for additional deburring. The HDTF-SI duct forming machine weighs 2480 kg. The SENTE MAKINA spiral duct machine is fully complete and consists of the following components: – main frame – sheet metal decoiler – forming heads (2 pcs.) – cutting system – stitching roller system for different sheet thicknesses – unloading table (2 pcs.) Technical data of the SENTE MAKINA HDTF-SI spiral tube machine  ...

AMOB MAH 40/3 CNC 3-roll bending machine was built in 2021 in Portugal by AMOB Group. The machine, designed for bending tubes and profiles, ensures the highest precision and repeatability of the produced parts. The machining process is performed by three hardened rollers, of which the upper roller has hydraulic adjustment. Each of these is driven by a reliable, high-power motor, which is located inside a fully welded body. This solution enables bending of even the most complex shapes both vertically and horizontally. All this is complemented by an advanced CNC control with memory for numerous programmes. The MAH 40/3 CNC tube and profile bending machine weighs 540 kg. Technical specifications of the AMOB MAH 40/3 CNC bending machine - control panel with CNC control - number of rollers: 3 - roller diameter: 148 mm - roller rotational speed: 12 rpm - number of shafts: 2 - shaft di ...

Offer 25328 Specifications: - Max. cutting width 3200 mm - Max. cutting capacity at 45 Kp/mm² 12 mm - Stand projection 175 mm - Cutting angle 1.48 ° -one. Cutting gap adjustment - Number of hold-downs 13 pcs - Stroke rate up to 10 1/min - Front angle stop approx. 1100 mm - 2 pcs. front support arms approx. 1100 mm -Mot. Back gauge with positioning control up to 1000 mm - Rear space protection with light barrier - Cut line illumination - Working height 860 mm - E - Footswitch - Drive 400 V / 19.5 kW - Space requirement approx. W 4150 x H 2150 x D 2300 mm - Weight approx. 8.5 t