sheet metal working used for sale (3,287)

sheet width: 1270 mmplate thickness: 2,0 mmdistance between columns: 1300 mmdaylight opening: 48 mm: 135 °total power requirement: Handbetrieben weight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,6 x 0,9 x 1,2 mSegment-bending machineSegment widths:25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 35 (600) mm: 35 (900) mmL-beam: 50 x 50 x 5 (800) mmT - beam - web outwards: 60 x 7 (600) mmAxis diameter: 50 mmwork speed: 4,5 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,1 x 0,8 x 1,5 mProfile bending machine with:- Foot pedal right / left- Recording: wave 50mm- with digital display- hardened special steel shafts- 1 set of standard rollers- Lower rollers are driven- Upper roll up and down hydraulically deliverable- Horizontal and vertical operation- Engine with braking deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mmplate thickness: 8,0 mmdistance between columns: 1070 mmdiameter of upper rolls: 150 mmpre-bending capacity: 6,o mmconnected load: 4,0 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2,6 x 0,65 x 1,1 mm- Electrically adjustable rear roller- Electrically adjustable lower roll (material clamping)- Digital readout for rear roller movement- Digital readout for lower roll movement (material clamping)- Hardened rolls- Conical rolling- Swiveling top roll- Brake motor- Emergency stop- Documentation- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tno. of strokes: 40 - 120 Hub/minsheet width: mmtotal power requirement: 40 kWPressing capacity 160 tonTable clamping area 1,100 x 1,280 mmRam clamping area 850 x 890 mmDistance between guides 1,120 mmDistance between columns (below guide ways) 1,350 mmDistance between Table and ram in upper position approx. 400 mmNo. of strokes 40 - 120 /minAdjustment of stoke 67 / 115 / 160 mmRam adjustment, motor driven 125 mmEjector travel 50 mmTotal electrical load, approx. 40 kW - 500 V - 50 HzWeight, approx. 24,000 kgAccessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubrication. Hyd ...

: 35 mm: 35 mmbar material dia. max.: 70 x 2 mmrectangle: 60 x 60 x 3 mmflat steel: 60 x 10 mmAxis diameter: 50 mmwork speed: 4,3 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 0,9 x 0,95 x 1,4 mProfile bending machine with:- Foot pedal right/left rotation- Hardened special steel shafts- 1 set of standard rollers- 2 rollers are drivenThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24236 Specifications: - max. working width 2550 mm - max. cutting capacity St 40 4.0 mm - Cutting angle 1.30 ° - Positioning-controlled back gauge 20 - 750 mm - Front angle stop + support arms - E. footswitch - Stroke rate up to 34 rpm depending on cutting length - Drive 400 V / 3 kW - Table height approx. 850 mm - Space required including back gauge, without front support arms -ca. W 3250 x H 1250 x D 2000 mm - Weight approx. 3500 kg

Key data: 1250 mm

Exhibition machine (unused) Working width 1,250mm Bending capacity steel : 1.25 (400N/mm2) Bending angle max. 135 degrees

Brand new Schechtl segment bending machine Sheet width: 1250 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.8 mm Colour: blue Dimensions: 1730 x 740 x 1180 mm Machine weight: 290 kg without roller scissors Opening width: 90 mm Bending angle: 150 mm

ECKERT Opal WaterJet COMBO waterjet cutting machine was built in 2011 in Poland by ECKERT AS Sp. z o.o. The machine, designed for precision machining of workpieces with a maximum thickness of 250 mm, combines all the benefits of plasma and waterjet cutting. The machining process is performed on a robust, large work table by means of a powerful cutting head. All table travel components are protected by bellows guards to ensure uninterrupted operation for many years of use. The design made of high-quality closed steel profiles, in turn, guarantees the highest stability during even the most demanding challenges. The ECKERT Opal COMBO WaterJet is offered with, among others, CAD/CAM software and a 37 kW high-pressure pump. Technical specifications of the ECKERT Opal WaterJet COMBO water cutting machine - maximum workpiece thickness (water machining): 250 mm - feed rate: 25000 mm/min - w ...

Sheet Metal Shear, Power Shear, Hydraulic Shear, Strojarne Piesok CNTA 3130, Used Equipment Cutting Length: 3150 mm Maximum Sheet Thickness: 16 mm Dimensions (L x H x W): 4.15 x 2.65 x 2.65 m (measured as a whole, without disassembly) Weight: 16,300 kg Manufacturer: Strojarne Piesok Model: CNTA 3130/16A Electrical Data: 400 V; 50 Hz; 33 kVA

Press Brake, ESPE CTO 80, Used Machine Manufacturer: ESPE Model: CTO 80 Pressing force: 80 tons Bending length: 2500 x 3 mm Table dimensions: 2500 x 160 mm Main motor power: 10 kW Weight: 6100 kg

Inv. Num. : 8332 Type: TrumaBend V50 Producer: Trumpf Generated: Parameters: Compressive force: 85 t Maximum bending length: 1275 mm Distance between frame walls: 1040 mm Machine height: 2375 mm Machine length: 1930 mm Machine width: 2030 mm Machine weight: 4750 kg

Max. punching force: 50 kN Stroke actuation via footswitch

Max. sheet thickness: 2 mm steel Max. blank diameter: 1000 mm Motorized drive via foot switch

Punching capacity: 165 kNworking area: 2070 x 1280 mmplate thickness: 6,4 mmcontrol: CC 220 workpiece weight: 150 kgpunch diameter: 76,2 mm: 80 m/min: 55 m/minweight of the machine ca.: 8000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3050 mmtable width: 1530 mmburner heads: 1 stroke: 290 mmspeed: 120 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 2,5 mmbending angle max.: 135 °stroke of upper beam: 25 mmweight of the machine ca.: 285 kgdimensions of the machine ca.: 1,35 x 0,85 x 1,20 m PRICE: 2.045,-- EUR - with an oblique segmented upper cheek- distribution segment: 25-30-35-40-45-50-75-100-150-200-270- done with the foot brake applicationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 4-20 mmwall strength: 2 mmbending radius min.: 10 mmbending radius max.: 75 mmbending speed: 35 mm/minpull up length of tube: 2000 mmControl: total power requirement: 7,5 kWweight of the machine ca.: 1,1 tdimensions: ca. 3100x1000x1400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  PLC OVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 500 mm  sheet thickness max.: 4 mm  coil weight max.: 10.5 to  feedstock transport direction: right to left COIL CHAIR  coil weight max.: 10.5 to  stroke: 750 mmDECOILER  design: single reel   sheet width max.: 500 mm  sheet width (min): 150 mm  coil weight max.: 10.5 to  max. diameter of coil: 2020 mm  mandrel expansion range from: 470 mm  mandrel expansion range up to: 530 mm  feed velocity max.: 20 m/minCROP SHEAR  sheet thickness max.: 4 mm  working width max.: 530 mm  stroke rate (max.): 20 /minLEVELLER UNIT  sheet width max.: 500 mm  sheet width (min): 150 mm  sheet thickness max.: 4 mm  sheet thickness min.: 2 mm  number of leveller rolls: 9   diameter of leveller rolls: 56 mm  diameter of feed rolls: 150 mm  feed velocity max.: 20 m/minELECTRICAL SPECIFICATION ...

3000w Year: 2018 5 Axis Fiber Laser 3000w Y Axis: 1500mm Twin Cell Machine

pressure: . tsquare measurement: 55 mmdiameter: 63 mmflat material: 170x20 mmtotal power requirement: kWweight of the machine ca.: tThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - Stepless cutting angle adjustment 30 - 135 ° - Stroke rate 60 1/min - Table support surface with T-slots 800 x 1000 mm - Depth stops with scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - E. - Footswitch - Space requirement approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1100 kg

NARGESA C3006 hydraulic guillotine shears were built in 2015 in Spain by PRADA NARGESA, S.L. The machine, which is designed for precision cutting of sheet metal with a maximum thickness of 6 mm, has quality knives with four cutting edges with increased service life. The beam is driven by a powerful hydraulic unit, which, like the electronic system, is made up of components from renowned brands. Easy operation of the machine, on the other hand, is ensured by a digital LCD display with an installed NC controller. The NARGESA guillotine shears weigh 8000 kg. Technical specifications of the NARGESA C3006 guillotine shears - maximum workpiece thickness (black steel 450 N/mm2): 6 mm - maximum workpiece thickness (stainless steel 700 N/mm2): 4 mm - maximum cutting length: 3030 mm - number of strokes: 12/min - cutting angle: 1,75° - maximum back stop distance: 700 mm - back stop posit ...

NARGESA MC 400 3-roll bending machine was built in 2015 in Spain by PRADA NARGESA, S.L. The machine, designed for precision machining of steel components, is an excellent choice for the production of, among others, gates, fences, railings and balustrades. The extremely rigid body is distinguished by the use of guide shafts and 3-axis rollers made of hardened steel, whose drive eliminates slippage during the rolling process. This solution, combined with independent, manual adjustment of the lower axes, increases overall ergonomics and productivity. The NARGESA tube and profile bending machine weighs 365 kg. Technical specifications of the NARGESA MC 400 tube and profile bending machine - number of rollers: 3 - roller diameter: 130 mm - roller rotation speed: 8 rpm - number of shafts: 2 - shaft diameter: 40 mm - shaft usable length: 80 mm - power: 1.5 kW - power supply: 3x 400 V ...

TRUMPF TruLaser 3060 laser cutting machine was built in 2007 in Germany by TRUMPF Werkzeugmaschinen Teningen GmbH. The machine, distinguished by its excellent precision and high productivity, is used for machining workpieces with a maximum thickness of 20 mm. The machining process is performed by a stable laser beam with a power of 4 kW and a thickness of only a few μm, which is generated by a reliable laser source with the highest energy efficiency. The automatic pallet exchange system, in turn, allows simultaneous loading and unloading during the cutting process, reducing machine downtime to a minimum. The offered TruLaser 3060 laser cutting machine also features a number of state-of-the-art technical solutions that significantly affect the cutting quality and expand the machine’s machining capabilities. This includes, for example, the ControlLine distance measuring system, which ...

BYSTRONIC ByStar 4020 laser cutting machine was built in 2011 by the renowned Swiss brand BYSTRONIC. The machine, designed to meet the highest industrial standards, is used for precision cutting and engraving of workpieces with a maximum thickness of 25 mm. Materials made of e.g. steel or aluminium are machined using a laser beam with a maximum power of 6 kW and a thickness of just a few μm. It ensures extremely precise workpiece edges, which are characterised by unprecedented smoothness and absence of irregularities. The offered ByStar 4020 laser cutting machine is also extremely easy to operate. The process parameters are programmed in the intuitive ByVision CNC control, which allows the creation of advanced machining programmes in just a few steps. All this makes the BYSTRONIC laser the perfect choice for any industrial plant. Technical specification of the BYSTRONIC ByStar 402 ...

Key data: 3020 mm, 2 mm

with motor backgauge, numerical NC control, manual bending beam lowering, foot switch Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3020 mm Sheet thickness steel: 2.0 mm Sheet thickness aluminium: 3.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: green Total power requirement: 400 V Dimensions: 3800 x 1000 mm Machine weight: 4500 kg Upper beam stroke: 200 mm without roller scissors/ Opening width: 200 mm

Key data: 2500 mm, 2 mm

with foot switch, with simple control up to 6 bending angles, potentiometer preset, manual bending beam lowering, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2500 mm Sheet thickness steel: 2.5 mm without backgauge Colour: green Total power requirement: 16 A Space requirement: approx. 3400 x 1000 x 1600 mm Machine weight: 2000 kg without roller scissors Bending angle: 145 degrees Machine Number: 50/3

sheet width: 3050 mmplate thickness: 13 mmweight of the machine ca.: 8 tdistance between columns: mmtotal power requirement: kWdimensions of the machine ca.: mmotorized limit stopcutting crack adjustmentcutting angle adjustmentfoot switchTechnische Daten / technical details:Schnittlänge / max. cutting length 3050 mmSchnittleistung / cutting capacity 13 mmHinteranschlag / limit stop 1000 mmAntriebsleistung Motor/ drive capacity motor 22 kWGewicht der Maschine ca. / weight 8000 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4 mm, 1500 kg

Fasti Beading Machine Size 4 150x 4mm Power max projection 500mm hydr. Feeding of the upper roller by foot switch Right-left rotation Nkebmd R E Ijv Tqy Njgsw Stepless speed adjustment by handwheel Holder 60mm Weight approx. 1500kg with accessories Built in 1963 Space requirement approx. 1000x1000x1750mm