sheet metal working used for sale (3,311)

Key data: 3100 mm, 6 mm

Hinged backgauge, manual cutting gap adjustment, lighting, cutting length adjustment, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3100 mm Sheet thickness steel: 6.0 mm Sheet thickness front: 4.0 mm Colour: grey/blue Total power requirement: 11 kW Machine weight: 900 kg Dimensions: 4000 x 2150 x 1640 mm Cutting gap adjustment: 0.05 -0.80 mm Hold-down: 14 Stroke rates per minute approx.: 19 stroke/min Cutting Angle: 1.2 Adjustable back gauge Back gauge: 1000 mm Machine number: SN20080583

Key data: 3190 mm, 6 mm

Note: Machine is currently still being revised, the illustrations were made before the Revision. Sheet width: 3190 mm Sheet thickness steel: 6.3 mm Colour: grey Total power requirement: 18.5 kW Machine weight: 6800 kg Dimensions: 3830 x 3820 mm with cutting gap adjustment Stroke rates per minute: 30 - 50 strokes/min Angle stop: 1500 mm Throat: 5 - 1000 (1500) mm

Inv. Num. : 8609 Type: 1600 KOMBI Producer: NESSAP Generated: Parameters: Control system: NESSAP Software: WRYKRYS Work table length: 3000 mm Work table width: 1500 mm Minimum sheet thickness: 0.5 mm Maximum sheet thickness when cutting: 100 mm Plasma Source: Cebora 160A Cutting speed: 12 m/min

Max. cutting length: 3100 mm Max. sheet thickness: 6 mm at 490 N/mm² Motorized backgauge with digital display Manual cutting gap adjustment Cutting length variably adjustable Cut edge lighting New knives

Punching force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shear With pipe notch on the steel bar shears Foot switch for stroke release Support table on the punching side Quick-change device Range of tools is included in the price

Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat bar Range of tools is included in the price Weight: 3,000 kg

Saw blade diameter: 300 mm Manual material tensioner Minimum quantity spraying device 120 kg

Long bending machine, with the following equipment: - 1 sharper rail 20°, offset, radius 1 mm for the upper beam - 1 insert rail 10/100 mm and 14/100 mm each for the bending beam - 2 foot switches for 2-man operation - S-Touch control with graphical profile display - 21.5" LCD touch color monitor with high-resolution graphics - Motorized depth stop 8-1000 mm - F-Geometry - within the EU with 32 amp plug with 5 m cable Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out. Working length: 4040 mm Sheet thickness max. steel: 1.5 mm Sheet thickness max. aluminium: 2.0 mm Sheet thickness max. VA: 1.0 mm Back gauge (min.): 8 mm Back gauge (max.): 1000 mm Colour: blue/grey Total power requirement: 400 V Dimensions: 5325 x 2232 x 1924 mm Weight: 5000 kg Upper beam stroke (opening width): 140 mm Plate thickness  ...

Microstep MG 6001.25 PRBG Working Area : 6000mm x 2500mm Kjellberg 360i with automatic gas console With rotator 1 x Autogenous 1 x drilling unit with tool changer Including filter system more information on request

CONTROLS  PLC SIEMENS S5 115U OVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 140 mm  sheet thickness max.: 6 mm  coil weight max.: 3 toCOIL CHAIR  coil weight max.: 3 to  stroke: 500 mmDECOILER  design: single reel   sheet width max.: 300 mm  coil weight max.: 3 to  max. diameter of coil: 1300 mm  mandrel expansion range from: 360 mm  mandrel expansion range up to: 430 mmLEVELLER UNIT  sheet width max.: 140 mm  sheet thickness max.: 6 mm  sheet thickness min.: 3 mm  number of leveller rolls: 21   diameter of leveller rolls: 50 mm  feed velocity max.: 43 m/minELECTRICAL SPECIFICATIONS  total power consumption: 35 kWKOHLER coil line consisting of:- Coil loading chair CS3000- Decoiler 300.1 H- VSRM 50.140/21 leveller- HK 140 upright leveller

Key data: 4040 mm, 4 mm

Max. cutting length: 4040 mm Max. sheet thickness: 4 mm steel Motorized adjustable backgauge with digital display up to 1000 mm Pneumatic sheet hold-up Side stop and table extensions Cutting length limitation Cut edge lighting Weight approx. 7500 kg

Key data: 3000 mm, 1500 mm, 4000 W

3000 x 1500mm / 4000w / MP FLEXIT Automatic loading & unloading

Key data: 160 t, 4000 mm

160 ton x 40000mm Multi Axis CNC

Description Guillotine Shears Hera HSS-5 Details Machine no. 511 Year of construction 1982 Cutting capacity 10 mm to 2m width with spare blade

Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire feeder Plain text display Compression Force Monitoring Wire straightener Bosch Stripping Devices Bracket and brush motor with mounted tool W32/1-32 Soundproof booth Fäßerb CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as shown in the pictures. Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

DAVI MCA 1513 4-roll plate rolling machine was built in 2023 in Italy by Promau S.r.l.. This highly efficient machine is the perfect choice for precision rolling of cylindrical, elliptical and conical forms. Sheet metal with a maximum thickness of 6,5 mm is machined fully automatically by four rollers, which are driven by planetary gears. In turn, the advanced control system allows, among others, the generation of a full programme from CAD files and an offline performance test. The offered DAVI MCA 4-roll plate bending machine is a guarantee of achieving repeatable parts of the highest quality. Technical specifications of the DAVI MCA 1513 plate rolling machine - number of rollers: 4 - maximum sheet metal thickness (mild steel, yield point 260 MPa): 6,5 mm - maximum sheet metal length: 1500 mm - control system: DAVI - motor power: 5.5 HP - power supply of the MCA 1513 machine: 4 ...

A punch riveting tool Böllhoff is available. Documentation available. An on-site inspection is possible.

Machine is in good technical condition, a visit and a test run are possible by prior arrangement.

Max. punching and shearing capacity: 800 kN For example, punches 25 mm holes in 20 mm steel Shears on the flat steel shear on 350 mm to 15 mm steel Further technical data on request With an assortment of stamps and dies as desired

A cylinder roll punching machine Adolf Illig is available. Pass-through width: approx. 850mm, pass-through height: approx. 120mm, roll diameter: approx. 190mm, table dimensions X/Y/Z: 2x approx. 1200mm/1200mm, working height: approx. 800mm, machine dimensions X/Y/Z: approx. 2700mm/1350mm/1550mm, weight: approx. 900kg. An on-site inspection is possible.

Sheet thickness iron: 0.75mm, sheet thickness steel: 0.5mm, working width: 780mm, stroke rate: 135/min. An on-site inspection is possible.

Lg.Nr. 25062 Specifications: - with pressure joining pliers ECKOLD, type MZ + hole punching device - Working pressure infinitely adjustable max. up to 500 bar - Compressive force joining pliers 25 Kn - Single cycle or continuous cycle - Cycle rate infinitely adjustable - Hose package unit – pliers approx. 4 m - Hydraulic oil capacity 15 ltr - Drive 400 V / 3 kW - Space requirement approx. W 550 x H 850 x D 650 mm - Weight approx. 150 kg

Qty. 1 Second-hand lathe CNC machine Manufacturer: VERNET BEHRINGER Machine type: FG 2005 CNC Definition: Sheet metal drilling line Year of construction: 2012 Voltage supply: 380 V, 3 ph., 50 Hz, Ground Control voltage: 24 V DC Installed power: 90 kVA Hydraulic unit: 15 l/min Central motor power: 4 kW Medium pressure: 130 bar Oil volume: ≈120 liters Limits of sheet metal dimensions to be machined Min. section: 100 x 100 x 5 mm Max. section: 2000 x 1000 x 40 mm & 1340 x 1000 x 60 mm

4-rolls Kramatorsk plate bending machine Ultimate tensile strength of material: 500 MPa (50 kg/mm²) Yield strength – cold bending: 250 MPa (25 kg/mm²) Yield strength – hot bending (primary): 100 MPa (10 kg/mm²) Yield strength – hot forming (secondary heating): 45 MPa (4.5 kg/mm²) Elongation at cold state: ±18% Maximum sheet width: 4000 mm Max sheet thickness – cold, without pre-bend: 71 mm Max sheet thickness – cold, with pre-bending: 63 mm Max sheet thickness – hot forming: 150 mm Minimum bending radius – cold: 560 mm Minimum bending radius – hot: 600 mm Maximum radius for closed bending (curled edge): 1000 mm Main motor: 160 kW Weight: 730 tons

Key data: 350 mm, 2 t, 1500 mm

Double decoiler Load - 2 x 1500 kg Belt width 350 mm Coil outer diameter - up to 1600 mm Coil inner diameter - 360-530 mm Manualle hydraul. Spread Pneumat. Pinch roller mechanical brake Dimensions - approx. 2 x 2 x 2.2 m WxDx H Bto - 1000 kg

Belt width 350 mm Number of straightening rollers - 11 pcs Diameter 60 mm Capacity 350 x 2.5 mm Motor 4 kW Speed adjustable by variator drive

STROJARNE PIESOK NTC 2500/4 guillotine shears were built in 1985 in Czechoslovakia. The machine, distinguished by its extremely sturdy design, is used for cutting sheet metal with a maximum thickness of 4 mm. The machining process is performed by high-quality cutting blades with an electrically adjustable gap between the blades. The NTC 2500/4 guillotine shears weighs approximately 3800 kg. Technical specifications of the STROJARNE PIESOK NTC 2500/4 guillotine shears - maximum sheet metal thickness (Rm=450 MPa): 4 mm - minimum sheet metal thickness: 0.6 mm - maximum sheet metal length: 2500 mm - cutting angle: 1°33′ - reach: 200 mm - back stop stroke: 4-750 mm - back stop drive: electric - back stop motor power: 0,25 kW - main motor power: 4 kW - installed power: 6.5 kVA - power supply: 3x 380 V; 50 Hz - dimensions (L x W x H): 3100 x 1600 x 1500 mm - weight of the mac ...

Key data: 40 t, 2000 mm

Inv. Num. : 8524 Type: PPM 20040 Producer: HACO Created: 2015 Parameters: Compressive force: 40 t Maximum bending length: 2000 mm

useful stroke: 1.700 mmworkpiece weight: 2,20 trotation: +/- 190 °stroke speed: 1,00 / 0,50 m/minRotating speeds: 0,50 U/mincomponent measurement max.: 6.000 x 2.550 x 1.400 mmControl: SIEMENS HMI total power requirement: 8,00 kWweight of the machine ca.: 8,00 tdimensions of the machine ca.: 6,00 x 4,00 x H4,00 mHYWEMA lifting and turning device.The product is used as a work aid to lift loads for ergonomically favorable assembly- or welding work.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8519 Type: MicroCut 3001.15P Producer: MicroStep Created: 2007, GO 2017 Parameters: Software: AsperWin Basic (2007) Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 40 mm Maximum sheet thickness when cutting (stainless steel): 40 mm Maximum sheet thickness (brass): 12 mm Maximum sheet thickness (copper): 12 mm Plasma Source: Formica ForCut 163W Burner: MT120