sheet metal working used for sale (3,311)

CONTROLS  PLC SIEMENS S7 300 OVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 500 mm  sheet thickness max.: 4 mm  coil weight max.: 10.5 to  feedstock transport direction: right to left COIL CHAIR  coil weight max.: 10.5 to  stroke: 750 mmDECOILER  design: single reel   sheet width max.: 500 mm  sheet width (min): 150 mm  coil weight max.: 10.5 to  max. diameter of coil: 2020 mm  mandrel expansion range from: 470 mm  mandrel expansion range up to: 530 mm  feed velocity max.: 20 m/minLEVELLER UNIT  sheet width max.: 500 mm  sheet width (min): 150 mm  sheet thickness max.: 4 mm  sheet thickness min.: 2 mm  number of leveller rolls: 9   diameter of leveller rolls: 56 mm  diameter of feed rolls: 150 mm  feed velocity min.: 1 m/min  feed velocity max.: 20 m/minCUT-TO LENGTH SHEAR  sheet width max.: 530 mm  sheet thickness max.: 4 mmCut ...

Coil weight: 1 ton Material width: 150 mm Coil exterior diameter: 1200 mm Expansion range: 480 - 520 mm Thickness: 0,5 - 4 mm

Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW

Offer 25079 Specifications: - max. working width 3100 mm - max. cutting capacity - at 400 N/m² strength 13 mm - at 700 N/m² strength 10 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 14 pcs - Engine backgauge - E. footswitch - Front angle stop - Stroke rate 15 rpm - Drive 380 V / 22 kW - Table height 800 mm - Space required including back gauge, without front support arms -ca. W 3400 x H 2250 x D 2150 mm - Weight approx. 12000 kg

Offer 25086 Specifications: - Flat steel shears - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Profile steel shears - L- and T-irons at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notches - With square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 100 t - Projection 510 mm - Stroke approx. 10 to 50 mm - Perforates in steel up to Ø 31 in 25 mm - E. contact stop - div. 10 pcs. punches + dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Qty. 1 Second-hand recently overhauled rolling mill Mfc.: Shinkwang Type: 4-Hi Built: 2014 – recently overhauled Previous rolling material: Aluminum 1000 and 3000 alloy Strip width: 650 mm max Strip thickness: 6.5 - 0.2 mm Work Roll: Dia. 210 x 750 mm length Backup Roll: Dia. 600 x 700 mm length Coil weight: 3000 kgs max Rolling speed: 180 m/min Main Motor: 300 kW, 400 V Winder: 150 kW, 400 V Rewinder: 150 kW, 400 V Spare Rolls: WR 4 ea, BR 2 ea

Offer 23250 Specifications: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Max. bending angle 180 ° - Max. bending radius 145 mm - Drive 400 V / 1.7 kW - Space requirement approx. W 900 x H 1100 x D 1400 mm - Weight approx. 600 kg -with - Pipe circular saw - Inside and outside tube end burr device - Pipe collaring device - Without tools

Qty. 1 Second-hand 4-Hi Cold Rolling Mill – Still in operation Mfc.: Japanese Company Built: 1972 Moved to present location and revamped in 2017 Status: Still in operation! Type: 4-hi cold mill 180Φ/650Φ600 mm Material: Aluminum alloy 1000 and 3000 alloy Strip Width: 400 ~ 700 mm Thickness: 0.3~7 mm Rolling speed: 150 m/min Main Motor: 300kW, 0-330/650 rpm

Bystar 4020 Year of construction 2006 4.4 Kw with pipe cutting axis very good condition

Manual Swivel Bending Machine Specifications: - Max. working width 1030 mm - Max. material thickness 3 mm - Bending angle approx. 0 - 135 ° - lockable with end stop - Upper beam is operated with side hand crank - Max. stroke upper beam 120 mm - Max. adjustment bending beam 45 mm - Bending process is supported by eccentric weight - Space requirement approx. W 1750 x H 1120 x D 450 mm - Weight approx. 620 kg

Key data: 3020 mm, 3 mm

one. Bending cheek presentation, foot pedal Sheet width: 3020 mm Sheet thickness steel: 3.0 mm Sheet thickness aluminum: 4.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: white/blue Total power requirement: 32 A Upper beam stroke: 200 mm Bending angle: 145 degrees Dimensions: 4300 x 2600 x 1900 mm Machine weight: 3960 kg Machine number: 220478

Gr. working width: 1250 mm for sheet metal up to: 1.75 mm Opening width upper beam: 70 mm Adjustability bending brace: 50 mm Space requirement: 1880 x 740 x 1140 mm

Key data: 220 t, 4000 mm

220 ton x 4000mm / 8 Axis CNC

Offer 25059 Specifications: - Bending capacity pipe at 45 kg / mm² to Ø 48 X 3.5 mm - Solid material up to 30 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 225 mm - Smallest inner bending radius Ri 10 mm - Drive 220 V / 1.7 Kw - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with - bending angle preselection - Digital bend angle display + bend angle fine adjustment - Bending tools , Ø 1/2" R 67 mm, Ø 1" R 67 mm ,

sheet width: 2000 mmplate thickness: 2,25 mmdistance between columns: 2040 mmtotal power requirement: 7,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,2x1,7x1,1 mSN-No. 380/6The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4 mmblade length: 250 mmangle adjustable from - to: fest 90 Gradtable surface area: 900 x 800 mmtotal power requirement: kWweight of the machine ca.: 0,65 tdimensions: 1,2 x 0,9 x 1,1 mHydraulic notching machine- Footswitch- 2 pcs. sheet metal stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 32 mmsquare edge steel: 30 mmL-beam: 80 x 80 x 8 mm: 80 x 13 mm: 36 tthroat: 170 mmwork stroke: 28 mmwork height max.: 980 mmmaterial thickness: 28 x 13 mmhole diameter in sheet thickness: 25x10 / 30x8 mmtotal power requirement: kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 1,2 x 0,8 x 1,9 mProfile steel scissors with- 4 workstations- 1 foot trigger- hydr. drive- Support tables- Rectangular notcher- Hole punch including toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 12 mmdistance between columns: 3100 mmtable height over floor: 900 mmcutting angle adjustment: 0,5 - 3 °no. of strokes: 6 - 13 Hub/minback stop - adjustable: 1000 mmdown holder: 18 Stoil volume: 350 ltotal power requirement: 22,5 kWweight of the machine ca.: 8 tdimensions of machine L x W x H: 3,96 x 2,10 x 2,22 m- with adjustment of cutting gap - Accessories: electr. back gauge, spare knivesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Trumpf 3030 3000W 1999 Perfect machine, always under maintenance, with a new 3200 generator. CNC Siemens (no Bosch) Complete with everything, including disassembly.

Trumpf 3030 3000W 1999 Perfect machine, always under maintenance, with a new 3200 generator. CNC Siemens (no Bosch) Complete with everything, including disassembly.

Trumpf 3030 3000W 1999 Perfect machine, always under maintenance, with a new 3200 generator. CNC Siemens (no Bosch) Complete with everything, including disassembly.

Rothenberger Robull Type L Hydraulic Pipe Bending Machine Larger, Sturdier Version Think it's type L. The number on the nameplate begins with L. The version that you can still buy at the moment is smaller and the bending glasses at the front are not so stable. Good used condition, full function, without the tripod foot. This is available to buy at Rothenberg, or simply build it yourself. Total weight 68 kg. Further dimensions can be found in the pictures. Shipping is done on several packages due to the weight

Hydraulic folding machine - ordering machine (delivery time approx. 10-14 weeks), incl. hydraulic dynamic crowning, touch screen, Pressure regulation of the upper beam, back gauge (1000mm), goat's feet with automatic tool clamping, electr./hydr. Adjustment of the bending beam -Similar to illustrations- hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touch screen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar-

accumulator pressure: 780 bar0: 38 mlCapacity: 55 kWcontrol: Siemens KP400 weight: 3.300 kgPower connection: 80 kVAvoltage: Hz 50 / 3 x 400 Vrange L-W-H: 3.240x1.200x2.800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m-Max. flow rate: 38 l/min-Power HP pump: 55kW-Max. water temperature: 40 degrees-Operating voltage: 3x400V/50Hz-Connected load: 80kVA-Total current consumption: 115A-Curb weight: 2300kg-Control: Siemens Comfort Panel KP400The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8191 Type: Xpert 320 Producer: Bystronic Created: 2018 Parameters: Compressive force: 320 t Maximum bending length: 4100 mm Lifting height: 565 mm Motor power: 30 kW

round bar steel: 30 mmsquare edge steel: 28 mmL-beam: 90 x 8 mm: 150 x 8 mmpressure: 35 ttotal power requirement: 2,8 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 0,75 x 1,0 x 1,5 mProfile steel shears combined with:- Foot switch- Length cutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: 2 castors hydraulically adjustable 3 rollers driven Bending moment: 48 cm/3 Roll diameter: 360 mm Main motor power: 7.5 KW Dimensions (length x width x height): approx. 2000 x 1300 x 1900 mm Weight: approx. 5.5 tons Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Specifications: 2 castors hydraulically adjustable 3 rollers driven Shaft diameter: 120 mm Roll diameter: 390 mm lateral hydr. Controlled arm correctors left and right Bending capacity square: 65 x 65 mm Bending capacity flat steel: 125 x 25 mm Motor power: 15 kW Mobile control panel with digital display Dimensions (length x width x height): approx. 1500 x 1650 x 2050 mm Weight: approx. 5 to The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Specifications: Working length: 2550 mm Stand width: 2125 mm Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Stroke: 200 mm Projection : 420 mm Crowning Working height: 960 mm Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons Accessories: 1-set AMADA standard tool The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Specifications: 2 castors hydraulically adjustable 3 rollers driven Resistance torque: 80 cm³ Shaft diameter: 100 mm Roll diameter: 315 mm lateral hydr. Controlled arm correctors left and right CE. Mark Bending capacity square: 120 x 60 x 5 mm Bending capacity flat steel: 130 x 25 mm Bending capacity tube: 114.3 x 6 mm Bending power angle: 100 x 10 mm Round steel: 80 mm Motor power: 11 kW Control panel with digital display Dimensions (length x width x height): approx. 1750 x 1850 x 1650 mm Weight: approx. 3.6 tons Accessories: Various bending rollers Condition: we will still carry out a complete service on the machine The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.