We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- 3-Roller Round Bending Machines (12)
- Axis Laser Processing Equipment (5)
- Beading Machines (12)
- Bending And Straightening Machines (1)
- Bending Machines (76)
- Bending Tools (61)
- Blanking Presses For Sheet Metal (1)
- Circular Shears (12)
- CNC Bending Machines (8)
- CNC Hydraulic Plate Shear (14)
- CNC Laser Cutting Machines (135)
- CNC Plasma Cutting Machines (28)
- CNC Pressbrakes (124)
- CNC Punching Machines (29)
- CNC Punching Nibbling Machines (7)
- CO2 Laser Marker (3)
- Combination Machines (4)
- Combined Punching, Nibbling, Forming And Beam Cutting Machines (7)
- Concrete Bar Bending Machines (1)
- Container Rotating Devices (13)
- Coper-Notcher With Punch For Profiled Materials (8)
- Coper-Notcher With Punch For Sheet Metal (1)
- Cutting-To-Length Lines (13)
- Deburring Machines (12)
- Decoilers (41)
- Feed Straighteners (3)
- Flame Cutting Units (4)
- Flanging Machines (6)
- Flat, Bar And Section Shears (7)
- Folding Machines (156)
- Guillotine Shears (96)
- Hand Lever Shears (5)
- Hand Plate Shear (3)
- Hole Punches (38)
- Hydraulic Shear (141)
- Ingot, Billet And Slab Shears (1)
- Laser And Plasma Cutting Centres (1)
- Laser Cutting Machines (64)
- Laser Cutting Presses (1)
- Laser engraving machines (6)
- Laser gas cutting installations (3)
- Laser Machines (9)
- Longitudinal Cutting Lines (20)
- Longitudinal cutting machines (2)
- Mandrel Bending Machines (3)
- Mandrel Pipe Bending Machines (9)
- Metal spinning machines (6)
- Motorized Beading Machines (11)
- Motorized Plate Bending Machines (84)
- Motorized Shears (20)
- Nibbling And Curve Cutting Shears (1)
- Nibbling Machines (6)
- Notching Machines (59)
- Other Combined Sheet Metal Working Machines (3)
- Other Metal Forming Machines (2)
- Other Sheet Metal Working Shears (2)
- Other Wire Working Machines (1)
- Pipe Bending Machines (4)
- Pipe Drawing Machines (1)
- Pipe Manufacturing Machines (7)
- Plasma Cutters (11)
- Plasma Cutting Machines (26)
- Plate And Section Shears (1)
- Plate Edge Pre-Bending Machines (3)
- Profile Bending Machines (40)
- Profile Steel Cutters (50)
- Profiling Machines (12)
- Profiling Systems (9)
- Punches (5)
- Punching Machines (58)
- Recoilers (4)
- Reel Straightening Units (2)
- Reels (5)
- Ring Bending Machines (8)
- Roll Bending Machines (9)
- Round Bending Machines (50)
- Section round bending machines (2)
- Shears For Profiled Materials (1)
- Shears For Sheet Metal Working (4)
- Sheet Metal Bending Machines (19)
- Sheet metal blowroom machines (15)
- Sheet Metal Clamp (1)
- Sheet metal cutting machines (4)
- Sheet Metal Deburring Machines (18)
- Sheet Metal Die (3)
- Sheet Metal Machining Centres (19)
- Sheet Metal Punching, Nibbling And Forming Machines (4)
- Sheet Metal Shears (12)
- Sheet Metal Straightening Machine (2)
- Sheet Notching Machines (3)
- Sheet Strip Feed Leveler (10)
- Smooth planer (2)
- Special Purpose Machines Built Up From Units For Metal Cutting Operations (1)
- Special Purpose Sheet Metal Forming Machines (1)
- Straighteners (11)
- Tape Straightening Machines (15)
- Three-roll plate bending machines (12)
- Tube Bending Machines (60)
- Universal CNC Bending Machines (2)
- Universal Lockforming (1)
- Volume bending machines (2)
- Water Jet Cutting Machines (22)
- Wire And Strip Working Machines (3)
- more
- A+B (1)
- A+B ERBEND (1)
- ABBEY (1)
- ABS (1)
- ABWICKELHASPEL (1)
- ACCURL (2)
- ACD (1)
- ACF (2)
- ACHENBACH (1)
- ADIGE (3)
- ADIGE BLM (1)
- ADIRA (2)
- AGIE CHARMILLES (1)
- AJAN (4)
- AK BEND (17)
- AK-BEND (29)
- AKYAPAK (6)
- ALBA (1)
- ALFRA (1)
- ALMI (7)
- ALMORE (1)
- ALPHA LASER (1)
- ALPMAC (7)
- ALU (1)
- AMADA (56)
- AMADA PROMECAM (5)
- AMF SPANNTECHNIK (1)
- AMG (1)
- AMGA (1)
- AMOB (2)
- AMT (1)
- Apfel (14)
- aps (3)
- ARKU (7)
- ARYMA (1)
- ASSERVIMENTI (1)
- ATLANTIC (15)
- ATS (4)
- AUTOMATIC (1)
- B+S GROUP (1)
- BAIWEI (1)
- BALLIU (2)
- BAUBLYS (1)
- BAUER (1)
- BAYKAL (24)
- BAZHOU (1)
- BBM (1)
- BEHRINGER (1)
- BELGIUS (1)
- BEMA (1)
- BENDMAK (1)
- Bernardo (22)
- BERNARDO, PWA HANDELS GES (1)
- BETSCHKE WEGERHOFF (1)
- Beyeler (6)
- Biegemaster (5)
- BIELOMATIK (1)
- Bihler (2)
- BLEMAS (2)
- BLM (4)
- BLM Adige (3)
- BLM-ADIGE (1)
- BODOR (6)
- BOLDRINI (3)
- BOLLINA (1)
- BOMBLED (1)
- BORTOLIN KEMO (1)
- BOSCHERT (23)
- BOSCHERT GIZELIS (2)
- BPR (1)
- Braun (3)
- BRAUN HIMMEL (1)
- BRAUN MAIER (1)
- BRONSWERK (2)
- BRONX (1)
- BRUDERER (1)
- BUCK (1)
- BURNET (4)
- BWM (3)
- BWRM (2)
- BÜLTMANN (1)
- Bystronic (61)
- BYSTRONIC BEYELER (1)
- BöLLHOFF (1)
- CABYCAL (1)
- CAMU (1)
- CANSA (1)
- CARL KNEUSEL (1)
- CEVISA (2)
- cewe (7)
- CHESTERMAN (1)
- CHIRON CNC-FERTIGUNGSZENTRUM (1)
- CIDAN (3)
- CINCINNATI (1)
- CISAM IMPIANTI (1)
- CMS (3)
- CMS Tecnocut (2)
- CMU (2)
- CoastOne (16)
- COILTEC (1)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
subcategories
(3rd category level)
CNC Pressbrakes 124
Decoilers 41
Folding Machines 156
Hole Punches 38
Hydraulic Shear 141
Punches 5
Reels 5
more 1451
Manufacturer:
(Category: 107)
A+B 1
ABBEY 1
ABS 1
ACCURL 2
ACD 1
ACF 2
ADIGE 3
ADIRA 2
AJAN 4
AK BEND 17
AK-BEND 29
AKYAPAK 6
ALBA 1
ALFRA 1
ALMI 7
ALMORE 1
ALPMAC 7
ALU 1
AMADA 56
AMG 1
AMGA 1
AMOB 2
AMT 1
Apfel 14
aps 3
ARKU 7
ARYMA 1
ATLANTIC 15
ATS 4
BAIWEI 1
BALLIU 2
BAUBLYS 1
BAUER 1
BAYKAL 24
BAZHOU 1
BBM 1
BELGIUS 1
BEMA 1
BENDMAK 1
Bernardo 22
Beyeler 6
Bihler 2
BLEMAS 2
BLM 4
BODOR 6
BOLDRINI 3
BOLLINA 1
BOMBLED 1
BOSCHERT 23
BPR 1
Braun 3
BRONX 1
BRUDERER 1
BUCK 1
BURNET 4
BWM 3
BWRM 2
BÜLTMANN 1
Bystronic 61
BöLLHOFF 1
CABYCAL 1
CAMU 1
CANSA 1
CEVISA 2
cewe 7
CIDAN 3
CMS 3
CMU 2
CoastOne 16
COILTEC 1
COLGAR 3
COLLY 1
COMAC 2
COMACA 4
COMESSA 1
CORMAK 1
CORNO 1
Costa 2
CSM 1
CUTLITE 1
DAI HYUN 1
DALMEC 1
DAMAMT 1
DANOBAT 2
DARLEY 11
DAVI 6
DENER 5
DERATECH 1
DESTACO 1
DIGEP 2
Dimeco 2
DMF 3
DMG 3
DOLAST 1
DONEWELL 2
Dreher 5
Dräco 2
DUMETA 16
DURMA 70
DYNOBEND 2
EAGLE 3
ECKERT 15
ECKOLD 67
Eclair 2
EDEL 11
EHT 21
EIGL 1
ELECTROX 1
ELMEA 1
Elumatec 7
EMMEGI 1
ERBEND 10
ERCOLINA 21
ERMAK 17
Ermaksan 4
ERNST 2
ESAB 9
ESPE 1
EUEN 1
EURAM 22
Euromac 11
EVERS 1
EXPERT 1
FACCIN 22
FAGOR 1
FALCON 1
FALKEN 11
Farina 2
FARROS 1
Fasti 65
FEMAS 1
FERMAT 1
FIBRO 3
FICEP 1
FIM 1
FIMI 2
Finn-Power 10
FINTEK 1
FISCHER 5
FLADDER 1
Flow 5
FOBA 2
FOMP 1
FORMAT 1
FORSTNER 1
FRECH 1
FRÖHLING 1
FUJICAR 1
G-WEIKE 1
GABELLA 2
GABRO 1
GADE 1
GECAM 4
approved
dealer
dealer
Max. punching and shearing capacity: 400 kN For example, punches 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request With an assortment of stamps and dies as desired
approved
dealer
dealer
sheet width: 700 mmplate thickness: 4,0 mmdistance between columns: 720 mmdiameter of upper rolls: 95 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 0,95 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
x-travel: 635 mmy-travel: 510 mmz-travel: 460 mmspindle turning speed - stepless: 20-14000 U/minweight of the machine ca.: 4 tdimensions of the machine ca.: 5 x 3.5 x 2.7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
x-travel: 1600 mmy-travel: 900 mmz-travel: 800 mmcontrol: HEIDENHAIN iTNC 530 for axes: 3 table surface area: 1700x850 mmtool magazin:: 30 spindle taper:: SK 40 spindle turning speed - stepless: 100-10000 U/minfeeds infinitely variable to rapid traverse: 2-20000 mm/minvoltage: 400 Vdimensions of the machine ca.: 385x420x325 cmweight of the machine ca.: 18.6 tCoolant through spindle: pressure: 18 bar3D measuring tracer: RENISHAW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
with CNC-path-control: HEIDENHAIN type: iTNC 530 for axes: 3 x-travel: 1020 mmy-travel: 560 mmz-travel: 600 mmtable surface area: 1000x560 mmtable load: 1.35 ttool magazin:: numbers of tools: 40 max. tool diameter: 76 mmmax. tool-dia with free toolbox: 125 mmmax. tool length: 305 mmmax. tool weight: 7 kgmilling head: spindle taper:: SK40 spindle turning speed - stepless: 100-10000 U/minPower: 12/18 KWfeeds -stepless-: 16000 mm/minrapid motion -longitudinal/cross/vertical: 40 m/mindimensions of the machine ca.: 3x2.3x2.6 mweight of the machine ca.: 6.8 t3D measuring tracer: RENISHAW OMP40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
x-travel: 2000 mmy-travel: 550 mmz-travel: 560 mmweight of the machine ca.: 10 tdimensions of the machine ca.: 5.5 x 3.2 x 3.1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
control: SIEMENS 828 D for axes: 4 x-travel: 1800 mmy-travel: 800 mmz-travel: 700 mmtable surface area: 1960x750 mmtool magazin:: numbers of tools: 24 max. tool diameter: 110 mmmax. tool length: 300 mmmax. tool weight: 15 kgspindle taper ISO: 50 spindle turning speed - stepless: 0-6000 U/minspindle drive: 18.5 kWfeeds -stepless-: 0-10000 mm/minrapid motion -longitudinal/cross/vertical: 10 m/minvoltage: 400 Vdimensions of machine: 5000x3630x3295 mmweight: 16 trotary table:: GSA+ CNC-320R tail stock: TS-B21 Coolant through spindle: pressure: 20 Bar3D measuring tracer: RENISHAW OMP-60 Coolant installation: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: 1000 mmplate thickness: 3,3 mmdistance between columns: 1050 mmdiameter of upper rolls: 90 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,39 tdimensions of the machine ca.: 1,4 x 0,9 x 1,2 mmSheet metal bending machine with special dimensions:- Capacity 700 x 4 mm- Conical bending- Swing-out top roller- Emergency release safety device- Documentation- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: 700 mmplate thickness: 4,0 mmdistance between columns: 720 mmdiameter of upper rolls: 95 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 0,95 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
weight max.: 10 tworkpiece diameter: 320 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,1 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: 1070 mmplate thickness: 3,0 mmdistance between columns: 1100 mmdiameter of upper rolls: 95 mmtube diameter: 140 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 1,35 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
plate thickness: 2,5 mmroll diameter: 98 mmthroat: 160 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 550x1400x1500 mDelivered with:• hydraulic version• 4 set of wheels• Foot control• Brake motor• Emergency stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
: 100 x 5 mmsquare edge steel: 16 x16 mmround bar steel: 18 mmL-beam: 100 x 8 mmdimensions: 400 x 290 x 280 mmweight: 35 KgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: 2000 mmplate thickness: 8 mmpre-bending: total power requirement: 7,5 kWweight of the machine ca.: 3,6 tdimensions of the machine ca.: 3600x1250x1350 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
plate thickness: 1,2 mmroll diameter: 62 mmthroat: 100 mmtotal power requirement: 0,75 kWweight of the machine ca.: 130 kgdimensions of the machine ca.: 1,1 x 0,5 x 1,3 mFlanging machine is equipped with:- Emergency switch- Footswitch- 7 pcs. Roll setsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
material width: 1015 mmmaterial thickness: 1 mmspeed: von Hand weight: 240 Kgdimensions: 1420 x 600 x 750 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: 1050 mmplate thickness: 3 mmdistance between columns: 1100 mmback stop - adjustable: 600 mmconnected load: 3 kWweight of the machine ca.: 1,1 tdimensions: 1,7 x 2,1 x 1,3 mThe machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
plate thickness: 2,5 mmroll diameter: 98 mmthroat: 160 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 550x1400x1500 mDelivered with:• manual version• 4 set of wheels• Foot control• Brake motor• Emergency stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: 2070 mmplate thickness: 4 mmdistance between columns: 2100 mmdiameter of upper rolls: 140 mmtotal power requirement: KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: 1270 mmplate thickness: 3,0 mmdistance between columns: 1300 mmdiameter of upper rolls: 95 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 1,35 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
weight max.: 40 tworkpiece diameter: 150 - 4500 mmdrum diameter: 400 x 160 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 1,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: 1070 mmplate thickness: 2,0 mmdistance between columns: 1100 mmdiameter of upper rolls: 76 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 1,8 x 0,8 x 1,3 mmSheet bending machine with:- Capacity 1050 x 2 mm- High strength wrought iron rollers with SAE 1050 certificate.- Upper and lower roller driven, feed roller without drive- Footswitch- conical bending- Swiveling top roller- Safety device emergency leash- Documentation- 400 volts- CE certificateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
weight max.: 20 tworkpiece diameter: 500 - 3800 mmdrum diameter: 350 x 150 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
weight max.: 40 tworkpiece diameter: 150 - 4500 mmdrum diameter: 400 x 160 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 1,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
weight max.: 20 tworkpiece diameter: 500 - 3800 mmdrum diameter: 350 x 150 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,5 kWweight of the machine ca.: ca. 1,8 tDimensions (LxWxH): 2,2 x 2,7 x 0,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
working width: 1380 mmworkpiece height: 70 mm: total power requirement: 45 kWweight of the machine ca.: 5.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
plate thickness: 1,6 mm: 4 tblade length: 156 mmangle adjustable from - to: fest Gradtable surface area: 450m x 305 mmtotal power requirement: Handbetrieb kWweight of the machine ca.: 95 KgDimensions (LxWxH): 530 x 380 x 480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: 2050 mmplate thickness: 3 mmdistance between columns: 2100 mmback stop - adjustable: 600 mmconnected load: kWweight of the machine ca.: 1,1 tdimensions: 2,7 x 2,1 x 1,4 mThe machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
material width: 305 mmmaterial thickness: 1,0 mmspeed: von Hand weight: 45 Kgdimensions: 500 x 340 x 420 mCombined sheet metal working machine with:- Bending, tool widths 25 - 50 - 75 - 75 - 105 mm.- Rolls, roll diameter 38 mm- scissors, max. 1015 x 1mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
: 30 x 8 mmsquare edge steel: 12 mmround bar steel: 15 mmweight: 0,025 t: 51 x 31 x 22 cmdimensions: 135 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
