sheet metal working used for sale (3,286)

Spare parts kit 1975863 consists of (see pictures) Errors in the technical data and prior sale excepted.

Manufacturer: TRUMPF Type L 2525 Year of construction 2007 Working area 2,500 x 1,250 x 115 mm Siemens Sinumerik 840D control system Laser power 3,200 watts Accuracy +/- 0.1 mm Equipment: Rotolas Enclosed machine frame PCS Automatic pallet changer Longitudinal conveyor belt for small parts/waste Laser Power Control Siemens control system: open PC-based control, easy operation, online help, diagnostic functions, maintenance hole book, technological data, teleservice Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin DIAS Height Control AutoLas Plus automatic focus position adjustment Network connection (RJ45) by installation via teleservice The machine is in good condition. Location Germany, viewing by appointment. Errors in the technical data a ...

used press brake Trumpf TrumaBend V320 Year of construction 198 Bending length: 4100 mm Working stroke height: 365 mm Back gauge: 6 axes Bending aid: 2 pcs.

Key data: 44 t, 1600 mm, 1550 mm

Electric Press Brake C15 CoastOne - Made in Finland Pressing force: 44T Bending length: 1600mm Spindles: 2x22T Light barrier: Lazersafe IRIS Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake tool holder: Hydraulic WILA tool clamping up / down 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Key data: 22 t, 900 mm, 850 mm

Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Key data: 22 t, 900 mm, 850 mm

Electric Press Brake Cone C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Serialnumber: 20610011 Year of construction: 2020 Volt / Hz / Kw: 400 V / 50 Hz / 0.75 Kw Country of origin: Germany

Key data: 3000 W, 1500 , 6000

New fiber lasers of the HLB series - Optimised equipment with an eye on the essentials – low acquisition costs despite high-quality components. 6kW resonator, Raycus cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs EQUIPMENT: Cutting Head: Raycus - Auto Focus MAX Photonics Resonator 6KW (12kW optional) Automatic changeover table incl. light barriers Suction Welldone CE certified CypcutControl Sheet format 3,000mm x 1500mm (4,000 x 2,000 optional) Max sheet thicknesses at 6KW FE 20m VA 15mm ALU 10mm CU 6mm Connected load max. 30kW Footprint approx. 9,000mm x 3,000mm x 2,200mm The machine is included 24 Months Warranty Commissioning Delivery within Germany and Software/operator training offered Gases, electricity, and you're done. In our showroom we have various laser machines from our manufacturers  ...

Key data: 2 mm

Strip width 1,500 mm, strip thickness 0.5-2.0 mm, number of straightening rollers 6 pcs., feed rollers 2 pcs., coil weight 3,000/ 5.000 kg., longitudinal shears 4 cutting heads manually adjustable, min. width 100 mm electric control new, Hasp can be used as both an unwinding and rewinding reel. Appendix cpl. Outdated, i.e. new.

ECKERT JANTAR 2 plasma cutting machine was built in Poland in 2008. The 14 metre long and 4 metre wide stable frame of the machine allows for efficient cutting of large-size details while maintaining excellent precision and quality of processing. In order to ensure a high level of comfort and safety, the work table is equipped with ventilation and an extraction system for exhaust fumes into tanks and feed bags, which effectively eliminates the dust generated during cutting. The JANTAR 2 plasma cutting machine can be expanded with other elements, such as devices for cutting and processing steel pipes or welding thin metal sheets using the piezoelectric method, giving the possibility of adapting the machine to the individual needs of a production facility. In addition, the machine comes with extensive equipment, including an easy-to-use ECKERT CNC controller and FastCAM software with a  ...

sheet width: 3200 mmplate thickness: 6 mmdistance between columns: 3200 mmthroat: mmback stop - adjustable: 20 - 600 mmdown holder: dimensions: ca. 4010 x 1610 x 1620 mmengine output: 7,5 kWControl: eView weight of the machine ca.: 7,2 tCNC swing cut panel shears3 support arms and 1 angle stopBall rollers in the tableOperating instructions availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transversal Sheet metal Stiffening machine ALMORE type DS RT 1500 Year of construction:1988 Capacity: 1550 x 1,5 mm Thickness: from 0,4 to 1,5 mm Speed: from 7 to 15 m/min. Foot control Length: unlimited Useful machine for making ventilation ducts Voltage: 380 V Dimensions (L x W x H): 2000 x 800 x 1500 mm Weight: approx 1500 kg

WaterJet KIMLA STREAMCUT 3116 build in 2017 in Poland, uses innovative waterjet cutting technology for machining among others steel, plastics and glass. Workpieces with a maximum thickness of 200 mm are cut on an easily accessible working area by the 3D head, programmed in the intuitive KIMLA software with many useful functions. The use of state-of-the-art technology combined with reliable components and a sturdy design guarantee the achievement of clean and precise edges along the entire length of the workpiece, regardless the type of machined material. During its use, the KIMLA 3116 water cutting machine was used to cut rubber using only water and underwent regular maintenance. The total weight of the machine is 2500 kg. Technical specifications of the KIMLA STREAMCUT 3116 water cutting machine - machinable materials: steel, stone, glass, plastics, tiles, etc. - work area dime ...

sheet width: 1570 mmplate thickness: 10 mmpre-bending: 8 total power requirement: 7 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,5 x 1,5 x 1,55 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0600 mmcoil outside dia.: 1500 mmweight max. in kg: 4000 kgwidth of sheet max. ca.: 3,60 mmsheet thickness - min.: 0,80 mmdiam. of the rolls ca.: 80 mmnomb. of straightening rolls: 7 feed rolls: 2 speed: 5-30 m/minrange of expansion ca.: 475-535 mmexpansion: hydraulisch pinch roll: hydraulisch total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDecoiler type MS 4000- Hydraulic spreading- Hydraulic pressure roller from above- Swivel-in limit roller at the front, contact disc at the rear- Auxiliary drive- Reel movable- Coil lifting tableStraightening machine type MR 58Rollers hardened and ground.- Pneumatically ventilated feed roller- Straightening rollers adjustable as a block- Lateral belt guidance at the inlet- Hydraulic band insertion aid- Straightening head can be opened- Large roll basket and transfer table at the outlet- Ultrasonic  ...

WE ARE SELLING AN NICE CONDITION TRUMPF ROTATION. MACHINE IS READY FOR USE. MACHINE INCLUDES ALSO TOOL GRINDER AND EXISTING TOOLS FOR CUSTOMER WE ORGANIZE TRANSPORT AND DISMANTLING AS WELL

Key data: 1050 mm, 3 mm, 1000 mm

Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized backgauge up to 1000 mm with fine adjustment via handwheel Shear angle adjustment Knife sharpened Operating instructions Weight: approx. 1400 kg

TIMESAVERS 41 SERIE 1350 WRD deburring machine was manufactured in 2004 in the Netherlands. The wide belt deburring machine is used in both small and large production facilities for precision smoothing of sharp edges and finishing work. The machine provides high performance and reliability throughout its service life. The surface machining of workpieces made from e.g. steel, aluminium and titanium is performed wet by a grinding system comprising a reliable abrasive belt and brush unit. The workpiece is dried at the end of the machining process so that the parts leaving the machine are dry and free of contamination. The deburring machine has an integrated paper belt filter into which the used coolant is transferred at the end of the process in order to separate the swarf and allow the coolant to be reused. Technical specifications of the TIMESAVERS 41 SERIE 1350 WRD deburring machin ...

large working width: 2520 mm for sheets up to: 1.5 mm Upper beam opening width: 180 mm Adjustability bending beam: 40 mm Bending angle adjustment: 135° Weight: 1970 kg Dimensions: 1970 x 750 x 1250 mm

4000 x 2000mm 10KW Fiber laser / 10,000w Fiber laser

200 ton x 4000mm Y1 Y2 X R Z1 Z2

3000 x 100 ton Regularly maintained by Bystronic with recent oil change. Modeva 10 graphic CNC X1, Y1,Y2, R1, Z1, Z2 New Fiessler light guards fitted 2021 Hydraulic top tool clamping Full set of 250 V30 R1 top tool including segmented sections

6000w TruDisc 3000 x 1500mm Big specification

TRUMPF 5130 B23 Year: 2021 Machine - C frame Press beam Spherical bearing of the press beam with press beam tilting On-Demand Servo Drive with 4-cylinder technology Distance measurement system (Y axis) with dynamic deflection compensation Hydraulic oil filling (life-long fill) Backgauge - Gauge fingers (two pieces) MACHINE OPTIONS Extension of the open height/stroke + 230 mm CNC-controlled wedge crowning 5-axis backgauge (X, Delta X, R, Z1, and Z2 axis) TRUMPF hydraulic upper tool clamp Keyboard and mouse Additional screen Shop floor programming TecZone Bend Tool Setup Optimizer (TSO) ACB Wireless (Automatically Controlled Bending) ACB Laser (Automatically Controlled Bending) Tool Indicator Part Indicator Front work area illumination Rear work area illumination Support bracket x 2 BendGuard Automatic

IMAC Plasma Cutter Working range 3000x1500 Workable thickness 15/20 mm. complete with vacuum cleaner Updated Software CD

material width: 300 mmmaterial thickness: 3 mmno. of straightening rolls: 7 weight of the machine ca.: 0,5 tdimensions of the machine ca.: BxTxH mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 250 mmmaterial thickness: 2 mmno. of straightening rolls: 19 weight of the machine ca.: 1,5 tdimensions of the machine ca.: BxTxH 1500x1500x2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 500 mmmaterial thickness: 0 mmno. of straightening rolls: 9 weight of the machine ca.: 2 tdimensions of the machine ca.: BxTxH 2000x1500x2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty.1 Second-hand Aluminium cold rolling mill Mfc.: SPIDEM Type: 4-Hi Non Reversing Built: 1964 Installed: 2017 (new mechanical & hydraulic, PLC – ABB, AGC) Stopped: 2020 Strip width: 1700 mm Thickness Entry: 11 mm Exit: 0.2 mm Rolling speed: 450 m/sec. with edge trimming: 300 m/sec. Mill force: 1500 T WR Length: 1830 mm Dia.: 465 / 500 mm Back-up rolls Length: 1830 mm Dia.: 1100/1200 mm De-coiler Max. counter traction force: 5500 kgP Reduction ratio: 1:5.53 Revolution: 72.3 – 199 RPM Speed: 136.5 – 375 m/min. Coiler (2 x 400-1100 RPM) Max. traction force: 15000 kgP Reduction ratio: 1:4.41 (470 m/min.) Speed: 9.9 – 200 m/min.

Inv. Num. : 5464 Type: 1250x1.2 Producer: China Created: 2014 Parameters: Maximum sheet thickness when cutting: 1.2 mm Maximum length of sheet plate: 1250 mm Equipment: 7-cylinder sheet metal straightening machine 2 knives for longitudinal cutting Unwinding and rewinding of sheet metal