sheet metal working used for sale (3,286)

Offer 22569 Specifications: - Max. working width 2040 mm - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Motorized stroke upper beam - Max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm - Manual bending process is supported by eccentric weight - Connection 400 V - Space requirement approx. W 3700 x H 1250 x D 450 mm - Weight approx. 1700 kg

Edgebander PB Engineering RIT 1200 - diam. 900

Offer 22408 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 10 mm - Projection 270 mm -Cutting angle° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Mechanical backgauge 20 - 650 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 12 per/min - Hydraulic drive 400 V / 22 kW - Table height approx. 820 mm - Space requirements incl. back gauge, without front support arms -ca. W 3850 x H 2000 x D 2000 mm - Weight approx. 8500 kg - With: - E-foot switch - Cutting line illumination

SMO-4008-N QC12Y 8x4000 Hydraulic Press Brake Specifications - Maximum thickness of mild steel (PN-EN S235): up to 8.0 mm - Maximum working length: 4000 mm - Cutting angle: 1.5 - Strokes/minute: 8 - Kickback distance: 600 mm - Motor power: 11.0 kW - Length: 4800 mm - Width: 1800 mm - Height: 1950 mm - Total weight: 7300.0 kg Equipment - Backgauge driven by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade spacing adjustment - Ball transfer units built into the table - Task lighting - Front supports - Mobile footswitch Rear ramps The rear ramp has been equipped with ball transfer units, so that shutdowns are never left on the machine. E21S Controller (Located on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be saved - up to 25 different steps in each program - R ...

Fiber Tube Laser with Automatic Wire Feed FLV-TA-6024 3kW Technical Parameters - Maximum profile height: 240 mm - Maximum profile length: 6000 mm - X- and Y-axis positioning accuracy: ± 0.05 mm/m - Repeatable positioning accuracy of X and Y axis: ±0.03 mm - Maximum Acceleration: 0.0G - Power: 3.0 kW - Source brand: Raycus or MAX Photonics to choose from - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Depth: - Steel S235: recommended depth 20.0 mm, maximum depth 22.0 mm - Stainless steel: recommended depth 8.0 mm, maximum depth 10.0 mm - Aluminum: recommended depth 6.0 mm, maximum depth 8.0 mm - Brass: recommended depth 5.0 mm, maximum depth 6.0 mm Construction The machine is very stable thanks to the welded construction. High-speed movement of the head with high precision is ensured by Japanese Fuji servo drives. Automatic lubrication system for axle ...

Offer 23293 Specifications: - Printing capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - Infinitely adjustable stroke 0 to 28 mm - Stroke rate 26 to 36 1/min - Projection 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - Weight approx. 1300 kg - With: - Foot switch - Grain detection device, - Support table with foldable stops W 1100 x D 850mm - Sliding paths of the stops from the center of the punch - Width between Li and Re approx. 470 mm x D 510 mm

Key data: 2 mm

Bandwidth 15.00 mm Strip thickness. 0.5 - 2.0 mm Coil weight... 7,000 kg Profiles... 4 pcs. Speed approx. 20 m/min. Straightening rollers 7 pcs. Complete cut-to-length and cut-to-length line with decoiler, insertion table, straightening machine, cross shears, Longitudinal scissors, electric control.

BIHLER GRM100 multislide punching and forming machine, Made in Germany. Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc. Equipped with 4x forming slides and 18 ton press station. Gripper feed on right-hand side with straightener. Max width of strip 100 mm. Max wire diameter 10 mm. Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Servo motor. Touch screen control. Air clutch. Weight cca. 6000 kg. Power supply 400/480V, 50 Hz. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.

Laser Salvagnini L5 FIBER 3 KLW Year 2011 with automatic stacker Unloading robots Visible in operation Available January 2024

Key data: 2 mm

Bandwidth... 1,550 mm Strip thickness 0.5-3.0 mm Coil weight. 15,000 kg Coil I Diameter 508 mm Coil A Diameter... 1,600 mm Straightening rollers 23 pcs. Execution. 6 high Stainless steel / aluminium

Bandwidth. 500 mm Strip thickness.. 0.3-2.5mm Coil weight. 5,000 kg Velocity. 70 - 120 m/min. Coil I Diameter.. 508 mm Coil A diameter. 1,500 mm

Key data: 3000 mm, 1500 mm, 6000 W

3000 x 1500mm Dynamic Edition

Ref. -No.: 10371Manufacturer: LVDYear of construction: 2013Type of control: CNCControl: 31ilbStorage location: HalberstadtCountry of origin: BelgienStructural steel: 15 mmstainless steel: 8 mmaluminum: 6 mmLaser source: Co2 - 4KW Edit size: 6000 x 2000 mmchanging table: Yes tension: 50 Hz - 400 Volt Serial no.:: 348XX Operating hours: 31280 HElectrical connection: IEC X-Axis: 6200 mmY-Axis: 2100 mmMax capacity: 4 kNMax. weight: 25055 KG DanPerformance: 75 kWMachine type: 62-21 cutting head: LM2000 NC Focus Process control: LM2500 Capacitive sensor: LM2301 EG8030 Further information:Last maintenance incl. new PC in 04/2023

Ref. -No.: 10368Manufacturer: BYSTRONICYear of construction: 2011Type of control: CNCControl: Bystronic ByVisionStorage location: Halberstadt - GermanyCountry of origin: SchweizManufacturer: BYSTRONIC Laser medium: CO² Kohlenstoffdioxid wavelength: 10600 NmMaximum power: 6000 CwWorkspace X: 3048 mmWork area Y: 1524 mmStroke Z axis: 100 mmPositional deviation Pa: +/- 0.1 mm/mPosition spread Ps: +/- 0,05 mmPositioning in axis-parallel X and Y maximum: 120 m / minPositioning simultaneously X/Y maximum: 169 m / minAxis acceleration X/Y maximum: 30 m/s^2table load capacity: 890 kgtable change time: 25 s

ECKERT AGAT SPEED gas cutting machine was manufactured in Poland in 2014. The machine designed for precision cutting of metal sheets with a maximum thickness of 100 mm is distinguished by a high-quality portal with an open structure, ensuring excellent stability during the performed cutting process and free access of the operator to the working space. The contamination generated during the cutting process is continuously removed by a sectional extraction table covering the entire working area of the machine. The ECKERT gas cutting machine is also equipped with, among others, a state-of-the-art CNC ECS 872 controller and an oxygen torch support with capacitive distance sensor. Technical data of the ECKERT AGAT SPEED CNC cutting machine - CNC control: ECS 872 - maximum workpiece thickness: 100 mm - work table surface (L x W): 3000 x 2000 mm - oxygen torch support with capacitive dis ...

ECKERT JANTAR 2 plasma cutting machine was manufactured in Poland in 2010. The machine with a reliable plasma torch and a large work table with a length of 3000 mm and a width of 1500 mm guarantees its user excellent precision in the machining of thin and thick metal sheets, as well as ensures a high degree of operational safety and long-term failure-free operation. The contamination generated during the process is effectively eliminated by the extraction table, covering the entire working area of the machine. The ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR130XD plasma source with a power of 130 A and a modern CNC ECS 872 controller. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC control: ECS 872 - work table area (L x W): 3000 x 1500 mm - work area (L x W): 3000 x 2000 mm - plasma source: HYPERTHERM HPR130XD - extraction tabl ...

Specifications Type: KBLH 700 Dimensions (LxWxH): 1850 x 680 x 2050 mm Working height: 700 mm Cutting length: 510 mm Knife length: 520 mm Max. shear cross-section: 3500 mm Stroke of the scissors, infinitely variable: 0 – 45 Max. stroke number of scissors: 11 PMG knife for: L-steel 90°+45°/ T-steel 90° Required power : 8.5 kW Weight approx.: 2950kg

Key data: 1020 mm, 3 mm

Specifications • Sheet thickness max. 3.0mm • Working width max. 1020mm • Bending angle max. 120° • Opening width of the upper beam max. 160mm • Description: suitable for prototypes • Power: Manual operation • Dimensions: 2300 x 1600 x 1500 mm • Weight: 760 kg

TRUMPF TruPunch 3000-1300 (S11) punching machine was built in Germany in 2013. The reliable machine with extensive equipment and modern components offers its user unparalleled precision and accuracy in machining both thick and thin sheet metal. In addition to standard punching and marking, the punching machine also allows fast grooving, surface embossing, forming and chipless threading in stainless steel, structural steel and aluminium. On the machine’s sturdy and welded C” shaped structure, sits a specially designed brush table with integrated balls, designed to facilitate the loading and unloading of workpieces. The use of this type of table prevents scratches and nicks from appearing on the surface of the sheet, which results in a significant increase in the quality of the machining. During the entire production process, the sheet is held rigidly by hydraulic clamps fixed to th ...

FINN POWER PRIMA POWER EBe system Year 2011 4kw All-electric machine tower warehouse 10 levels punching machine with electric shear Loading and unloading robots Electric panel bender 2200 height 205 Available April 2024

Max. width: 3200 mm Nominal width: 3050 mm Max. thickness width: 40 mm Min. thickness width: 12 mm Max. material speed: 12 m/min Work rolls: -Units: 7 -Diameter: 340 mm Backup rolls: -Units: 5 -Diameter: 340 mm Supporting rolls: -Units: 15 -Diameter: 334 mm Diameter of feed and eccentric rolls: 380 mm Electrical motor: 132 kW Floor space: -Length: 3657 mm -Width: 5486 mm -Height: 3048 Total weight:105 tons

sheet width: 0500 mmcoil outside dia.: 1400 mmweight max. in kg: 4000 kgplate thickness: 0,80 - 3,60 mmdiam. of the rolls ca.: 80 mmfeed rolls: 2 nomb. of straightening rolls: 7 exit pinch rolls: 2 speed: 5-30 m/minrange of expansion ca.: 445 - 530 mmexpansion: manuell total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mControl conversion to SIEMENS S7 in 2012- pneumatic pressure roller on the side- pneumatically ventilated feed roller- Straightening rollers manually adjustable- lateral belt guide at the inlet- Large roller basket at the outlet- Ultrasonic transmitter for loop control- Roller feed type 1125 D- Bandwidth max. 510 mm- Band thickness max. 6 mm with full width 5.50 mm- Roll diameter 125mm- Feed speed: max. 100 m/min.- pneumatically ventilated top roller- Lateral tape guide with digital display- Inlet roller basketThe data for this ad was ...

weight max.: 5 tworkpiece diameter: 300 - 2500 mmdrum diameter: 250 x 100 mmfeed: 100 - 1000 mm/mintotal power requirement: 0,75 kWweight: 0,6 tdimensions: 1,5 x 1,0 x 0,6 mcharacteristics• Self-aligning for multiple diameters• Infinitely variable speed of the drive unit• Polyurethane coating of the rollers• Optimum load distribution (4 rolls/unit), particularly gentle for workpieces with low wall thickness and sensitive surfaces• High stability due to the solid construction of the machine• CE certificate• Very good value for money• Remote control on the cable• Documentation in EnglishThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 60 mm, 2 mm

Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Turret: 12-way adjustment Mandrel length: 4500 mm Bending tools: - Ø 22 mm - Ø 25 mm - Ø 48 mm Equipped with: - 3 thorns - Mandrel retraction device - Foot pedal - Bending speed adjustment Country of origin: the Netherlands Motor power: 7.5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg

Key data: 3100 mm, 6 mm

Working length: 3100 mm Cutting capacity: 6 mm Backgauge range: 750 mm Equipped with: - 3 sheet metal support arms - Rear access protection - Foot pedal Engine power: 11 kW Machine LxWxH: 3750 x 2350 x 1850 mm Machine weight: 5500 kg

Bystronik By Speed Laser year - .2004- 4400w Machine equipped with Bytrans loading and unloading connected to a sheet metal magazine with 76 drawers divided into 12 unloading and the remainder of virgin sheet metal.

Inv. Num. : 6924 Type: Roto Mini 1100 Producer: Nessap Created: 2018 Parameters: Max. working length: 1100 mm Working diameter: 500 mm Power: 80 A Maximum cutting thickness: 8 mm Equipment: Anti-collision system Extraction of the flue gas inside the cut pipe Cover of the X-axis with protective bellows Extendable ashtray A few clues

Inv. Num. : 6907 Type: B/90 Producer: Curvatubi Generated:- Parameters: Tube diameter: 50-60 mm

Inv. Num. : 6794 Type: 3015 Producer: BODOR Created: 2023 Parameters: Laser power: 12 kW Working table length: 3000 mm Working table width: 1500 mm Machine weight: 9000 kg

sheet width: 1250 mmplate thickness: 3,0 mmdistance between columns: mmpower requirement: 2,2 kWdimensions: 3,27 x 1,69 x 1,29 mweight of the machine ca.: 1,6 tused compact mech. guillotine shear- strokes per minute: 50The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.