boring mills and machining centers used for sale (3,253)

spindle diameter: 80 mmx-travel: 1100 mmy-travel: 750 mmz-travel: 1350 mmsurface area: 1000 x 1000 mmtotal power requirement: 6 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 5x3x3 m• 3-axis-D.R.O.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1800 mmtable load: 12,5 ttable adjustment - longitudinal: 1.250 mmtable rotating: 360 Gradtable positioning: 4 x 90 °feeds - longitudinal: 0,63 - 2.000 mm/mintotal power requirement: 4 kWweight of the machine ca.: 7,6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mmthroat: 320 mmbore stroke: 135 mmthread dia.: M 20 mmspindle turning speed range: 72 - 2600 U/minfeeds: 0,1 - 0,2 - 0,3 mm/Uspindle taper: MT 3 table surface area: 370 x 360 mmDistance spindle/table max.: 850 mmdistance spindle/base plate: 1400 mmvoltage: 400 V / 50 Hztotal power requirement: 1,0 - 1,5 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,2 x 0,7 x 2,3 m• with cooling device• threading attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 90 mmx-travel: 900 mmy-travel: 900 mmz-axis: 1200 mmw-axis: 800 mmtable surface area: 900 x 1200 mmrotation movement: 360 Gradtable load: 6,0 tturning speeds: 25 - 1400 U/minspindle taper ISO: 40 voltage: 380 V / 50 Hzdrive milling spindle: 9,2 kWtotal power requirement: 35 KVAweight of the machine ca.: 10 tdimensions of the machine ca.: 4,5 x 2,8 x 2,5 m• Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,• radial face slide Ø 600 mm.traverse distance: 150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore diameter: 620 mmspindle diameter: 130 mmbore depth: 320 mmfeed stepless: 0 - 12 mm/minturning speeds: 10 - 70 U/minvoltage: 380 V / 50 Hztotal power requirement: 4 kWweight of the machine ca.: 1,6 tdimensions of the machine ca.: 2,0 x 1,2 x 1,3 mtransportable drilling out work, completely ready for connectiongear of drill spindle runs over LENZE planetary driveadvanced feed with LENZE direct current motor, output: 160 wattclockwise and counterclockwisewith tool holder for Ø 420 x 620 mm,tool holder for tooling equipment fabri. LENZ LPAS 3,diverse turning steelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 105 mmx-travel: 1200 mmy-travel: 1000 mmz-travel: 325 mmadjustment of cross-rail: 785 mmdistance between columns: 1600 mmdistance spindle - column min./max.: 215 / 1100 mmspindle feeds - stepless: 1 - 6000 mm/minspindle taper: ISO 40 spindle turning speed - stepless: 40 - 1800 U/mintable surface area: 900 x 1500 mmworkpiece weight: 2000 kgspindle drive: 5 kWtotal power requirement: KVAweight of the machine ca.: 6 tdimensions of the machine ca.: 3,3 x 3,0 x 2,8 mdimensions of the machine ca.: 3,3 x 3,0 x 2,9 m• with RENISHAW -detector OMP 40,• mechanical refurbishing and new control HEIDENHAIN TNC 410 in year 2002The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mmx-travel: 10.000 mmy-travel: 3.000 mmControl: total power requirement: 120/63 spindel kWweight of the machine ca.: 63 tdimensions of the machine ca.: 15x3.85x7.36 mStocknumber 1210057Type of machine CNC Floortype boring machineMake WOTANType Rapid 5CBuild in 2004Type of control HEIDENHAIN iTNC 530Spindle diameter 160 mmX-stroke (mm) 10.000Y-stroke (mm) 3.800Z-stroke (mm) 700W-stroke 700 mmTool Taper Iso 50Speeds (Rpm) 1,25 - 1250Feeds (mm/R) 1 - 5000 mm/min Rapid feeds 5 mtr/min.Total Power (KW) 120 /spindel 83Lenght (mm) 14.500Width (mm) 3.850Height (mm) 7.360Weight 62.300 kg Additional informationcompletely overhould in 2004 and retrofitted by Dorries Scharmann with CNC control HEIDENHAIN iTNC 530- 4 different angular milling heads- hydrostatic spindle bearing- aerostatic guideways- coolant device- chi ...

spindle diameter: 110 mmx-travel: 4000 mmy-travel: 2000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m Stocknumber 1210014Type of machine Floortype Boring MachineMake PEGARDType AF11Type of control ConventionalSpindle diameter 110 mmX-stroke (mm) 4000Y-stroke (mm) 2000Z-stroke (mm) 300/750Table dimensions (mm) 1200 x 1600 mmTable rotation (degrees) 360 Tool Taper Iso 50Speeds (Rpm) 4 - 1000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mmarm length: 1500 mmworkpiece height max.: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 1610008Type of machine Radial drillMake MASType VO 50Admision in drilling spindle MT 5Max. drill capacity 50 mmBase dimensions 1820 x 986 mmSpeeds (Rpm) 28 - 2500Feeds (mm/R) 0,5 - 2Lenght (mm) 3250Width (mm) 1120Height (mm) 3396Weight 4550The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mmx-travel: 10.000 mmy-travel: 3.000 mmControl: ICEM 402 total power requirement: kWweight of the machine ca.: 80 tdimensions of the machine ca.: mStocknumber 1210050Type of machine CNC Floortype Boring MachineMake SKODAType W 160 CNCBuild in 1974/retrofitted in 2002Type of control ICEM 402Spindle diameter 160 mmX-stroke (mm) 10.000Y-stroke (mm) 3.000Z-stroke (mm) 1600W-stroke 1250 mmSpeeds (Rpm) 1 - 1.200Feeds (mm/R) 0,5 - 8.000 mm/min.Rapid feeds 8.000 mm/minTotal Power (KW) 180 KvAWeight 80 tonThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mmx-travel: 1200 mmy-travel: 800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 5,6x3,4x3,x7 mBrand: FemcoType: WBT-100SR2CNC brand: MitsubishiCNC model: Meldas C3Year of make: 1995-05Facing supportTable length: 1.440 mmTable width: 1.600 mmSpindle diameter: 100 mm øMachine dimensions (lxwxh): 5.680 x 3.400 x 3.700 mmincl. right-angle milling head type HuronThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mmx-travel: 15000 mmy-travel: 4000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 1210060Type of machine Floortype Boring machineMake SKODAType W160HCBuild in 1990Spindle diameter 160 mmX-stroke (mm) 15.000Y-stroke (mm) 4.000Z-stroke (mm) 1.600W-stroke 1.250Tool Taper Iso 50 Additional informationWith 3 floorplates 1880x5615 mm en 3x 1880x6400 mm3 millingheads and 1 support1 rotarytable Skoda S-35 C, 35 ton 2800 x 3150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mmarm length: 2000 mmworkpiece height max.: mmtotal power requirement: kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 5,8x4,5x3,4 mBrand: BatliboiType: BPR-50Boiler radial drilling machineCapacity: 50 mmThroat depth: 2.000 mmSpindle taper: MK5Stroke: 350 mmDrilling Spindle: 75 mm øHead in degrees adjustableSpeed min: 16 RPMSpeed max: 800 RPMClamping surface: 2.610 x 1.050 x 260 mmMachine dimensions (lxwxh): 5.740 x 4.450 x 3.397 mmMachine weight: 6.570 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 105 mmx-travel: 1000 mmy-travel: 1000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: JuaristiType: MDR105 CNCCNC brand: HeidenhainCNC model: TNC145Year of make: 1983Table length: 1.000 mmTable width: 1.000 mmX: 1.000 mmY: 1.000 mmZ/W: 1.000 mmSpindle taper: ISO 50Spindle diameter: 105 mm øThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HURCO VM10 Vertical Machining Centre. Hurco WINMax Control Year of construction: 2010 Manufacturer: Hurco Model: VM10 Control: Hurco WINMAX Spindle Speed: 10000rpm Table size: 762 x 356 mm Tool change capacity: 20 Tool size: DIN40 Traverses XYZ: 560 x 356 x 457mm

Year of construction 2003 Control Heidenhain iTNC 530 Table size 280mm Table load 200kg A-axis +/- 110 degrees B-axis 360 degrees X-axis displacement 700mm Y-axis displacement 590mm Z-axis displacement 480mm Spindle 15000 rpm Rapid passage 32m / min Automatic tool changer Yes, Big Plus spindle system Number of tools32 Tool length 280 mm Tool diameter 88 mm or 125 mm with adjacent pocket area Tool weight 7 kg Input400 / 3 / 50hz 33kW Equipment gap conveyors, coolant, handwheel, oil cooler Features Fully enclosed guarding Length 4000 mm Width 3000mm Height 3000 mm Net weight actually 9,490 kg. / 9.4 tons.

bore capacity in steel (diameter): 40 mmthroat: 293 mmbore stroke: 120 mmspindle taper MT: 3 column diameter: 115 mmtable surface area: 514 x 360 mmspindle turning speed - stepless: 160 - 2250 U/mintotal power requirement: 1,0/1,6 kWweight of the machine ca.: 0,285 tdimensions of the machine ca.: mCondition: new / unused: The machine can be viewed under current.: 37981400 V, 50 Hz, colour: light grey RAL 7035continuous speed control, digital speed indication, push button for emergency switch off,turning switch for clockwise/counterclockwise rotation, motor protection switch, IP 54, connecting plug, finish: structure varnish, new spindle bearing, new step pulleys, belts aso.operation manual, wiring diagram.Machine has been checked in our workshop, including electr. testing report.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 23 / 28 mmthroat: 260 mmbore stroke: 120 mmtool taper: MK 3 table-size: 500 x 350 mmcolumn diameter: 100 mmtotal power requirement: 1,3 kWweight of the machine ca.: 400 kgdimensions of the machine ca.: 800 x 600 x 1750 mmDefective feed!Right-left rotationstepless speed adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmControl: Heidenhain TNC 430 total power requirement: 26 kWweight of the machine ca.: 6500 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmarm length: 410 - 1000 mmworkpiece height max.: 765 mmcoolant: ja boring spindle diameter: 38 mmdiameter of quill: 70 mmspindle stroke: 225 mmboring spindle: MK 4 mm/minspindle turning speed - stepless: 70 - 2000 U/minfeed range - spindle: 0,04 - 0,32 mm/Ucolumn diameter: 225 mmbore radius max./min: max. 1130 mmtable surface area: 630 x 1320 mmheight adjustment: 500 mmbase plate: 1500 x 1000 mmT-slots: 4 StückT-slot - distance: 18 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: mshift of supports: 590 mmwithout turntable and toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3100 mmswing diameter: 3600 mmturning height: 3600 mmcontrol: Fagor 8035 table load: 35 tturning speeds: 0,32 - 40 U/minmax. ram stroke: 3000 mmtable load: 35 tturning speeds: 0,32-40 U/mintotal power requirement: 70 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5 axis CNC – portal profile machining center for all materials - aluminum - steel - stainless steel - plastics - non-ferrous metals. Drilling + tapping, flow drilling, milling + thread milling, as well as sawing at free angles – for example, steel profile saws up to 6 mm wall thickness Largest saw blade diameter 500 mm Largest machining length 7,000 mm Largest workpiece cross-section 650 x H 300 mm Working range in five-axis operation 6,400 mm x 480 x H 300 mm Spindle drive power 17 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving tool magazine for 12 tools Tool holder HSK 63 Rapid speeds up to 100 m/min / acceleration 2.5 G Space requirement (including control cabinet and control panel) approx. 9 m x 2.5 m x H 2.6 m Weight approx. 5,000 kg. equipment: - OSAI® CNC control - YASKAWA® feed drives and feed controllers - HITECO® milling spindle w ...

Code 99902 Description Pillar drill Make CABER Modell 59 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 50 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 65 - 1150 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

Code 99901 Description Pillar drill Make CABER Modell 58 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 40 mm Spindle quill 200 mm Spindle taper 4 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 90 - 1550 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

Code 5284 UMSCHREIBUNG CNC Bohrmaschine Fabrikat Okuma Typ DCN - 4 Maschine Nr. 55020239 Steuerung OSP - 330 Diameter Aufspantisch (4x) Ø 400 mm Einbauhöhe Tisch-Spindel 400 – 200 mm Spindel Hub 200 mm Schnellgang vertikal 12.000 mm/min. Vorschübe 5 – 1200 mm/min. Spindeldiameter 45 mm Spindelaufnahme MK 3 Anzahl Spindelstufen 8 Stufen Geschwindigkeiten 125 – 3150 UpM Anzahl Werkzeugaufnahmen 10 St. Motor 1,5 kW 380 Volts Maschinemasse ( L x Br. ) 1540 x 1750 mm Höhe 2100 mm Gewicht 2000 kg Zustand normale Zustand

Code 71095 Description Pillar drill Make WEBO Modell Gradua 50 Serial No. 053 12 5 Year Table ( turnable ) 620 x 600 mm Base 620 x 600 mm Drilling capacity ( Steel 60 ) 60 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1250 mm Spindle speeds 8 steps 56 – 1250 rpm Spindle feeds 8 steps 0,06 – 0,84 mm/rpm Weight 1000 kg Motor 4,0 / 3,3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Optie 4 spindle drillinghead ( Price € 1.000,- ) Condition Machine is in good condition

Drilling capacity in steel (diameter): 80 mm Thread cutting in steel: M 80 x 4 mm Projection: approx. 500/2500 mm kl./gr. Distance between contact surface and drill pinole: 650/2300 mm Pinole stroke: 500 mm Table clamping surface: 1250 x 2800 mm Speeds: 9 - 1800 rpm Feeds: approx. 2 - 1250 mm Spindle drive: 7.5 kW Weight: 12000 kg Space requirement: 4000 x 1280 x 4100 mm

x-travel: 1000 mmy-travel: 508 mmz-travel: 460 mmsize of pallet: 1240 x 550 mmnumbers of pallets: 2 workpiece weight: 800 kgspindle taper ISO: 40 spindle motor: 5,5 kWturning speed range: 28 - 4000 U/minno. of tools in magazin: 30 control: MAZATROL M 1 total power requirement: kWweight of the machine ca.: 5,6 tdimensions of the machine ca.: 4,50 x 3,00 x 2,65 macc.: chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mmy-travel: 450 mmz-travel: 450 mmrotary table dia.: 270 mmrotary table tiltable: 0 - 24 °spindle taper ISO: 30 spindle turning speed range: 31,5 - 7100 U/minfeed speeds: 1 - 10.000 mm/mincontrol: SINUMERIK System 8 no. of tools in magazin: 40 wotkpiece diameter with 2 vacant positions: 100 mmworkpiece length: 255 mmweight of tools max.: 6 kgtotal power requirement: 32 kWweight of the machine ca.: 11,6 tdimensions of the machine ca.: m= 5 axis machining centreAccessories: various tool fixtures, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity in St 60: 40 mmthreading in St 60: M 24 mmthreading in GG 20: M 30 bore stroke: 120 mmShort spindle: MK 3 throat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle - machine table min./max.: 117 / 701 mmfeed: 0,10 + 0,20 mm/Uspindle turning speed range: 160 - 2250 UpMtotal power requirement: 1,45 / 1,9 kWheight of the machine: 1840 mmweight of the machine ca.: 285 kgStandard equipment:- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for right-left rotation- Motor protection switch- Speed adjustment stepless- Speed display digital- Feed overload protection- Protection IP 54- Connector (fully assembled, cable length 2 m)- Spindle protection with electrical protectionPos. 25Coolant device B, consisting of: separate container (33l),Pump with motor protection  ...