lathes used for sale (2,997)

SEDIN 1512 vertical lathe YOM 1987 Table diameter 1120 mm Max. turning diameter 1250 mm Max. workpiece height 1000 mm Max. workpiece weight: - 3200 mm (5…80 rpm) - 1000 mm (250 rpm) Main motor power 30 kW Installed power 37 kW Dimensions L/W/H 2750/2975/4100 mm Weight 16000 kg

turning diameter: 720 mmturning length: 2.000 mmcontrol: FAGOR 8055 turning diameter over slide: 470 mmfeed: 8 m/minspindle nose: DIN-55027-11 spindle passage: 104 mmnumber of spindle speeds: 0-1600 U/min/rpmspindle drive: 17/ 20.5 kWTorque: 1590/1920 Nmtotal power requirement: 28 kWweight of the machine ca.: 4.9 tdimensions of the machine ca.: 6.600 x 2.300 mmTailstockTailstock quill diameter: Ø 100 mmTailstock quill travel: 200 mmTailstock quill taper: Morse taper MT 6Turret4-position automatic turretMachine EquipmentFull rear protection enclosureHydraulic 3-jaw chuck SMW AUTOBLOCK 400 GHFixed steady rest, capacity 50–220 mmMaximum Permissible WeightsMax. workpiece weight between centers: 2,560 kgWith 1 steady rest / with 2 steady rests: 3,200 kg / 4,000 kgFree-standing, center of gravity at 250 mm: 800 kgThe data for this ad was created with ModulMWS - the software solution of Lo ...

centre height: 280 mmcentre distance: 1200 mmturning diameter over bed: 570 mmturning diameter over slide: 365 mmturning length: 1000 mmspindle taper: DIN 55027 Gr. 8control: Sinumerik 810 D SIEMENSbed width: 360 mmspindle bore: 62 mmturning speed range: 3 - 2500 U/minfeed:: 5000 mm / minrapid travel - longitudinal/face: 10 m/min3-jaw-chuck diameter: 250 mmquick change toolholder: SANDVIK Coromant Captodrive capacity - spindle motor: 25 kWtaper in tailstock-quill: MK 5 dia. of quill: 100 mmquill stroke: 190 mmcoolant: voltage: 400 Vweight of the machine ca.: 5,0 tdimensions of the machine ca.: 3,55 x 2,20 x 1,95 m- Serial No.: 2022-3742-03- CNC-Control SIEMENS Sinumerik 810 D- Rapid feed- Coolant equipment- Machine lampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 840 mmturning diameter over slide rest: 640 mmturning length: 3300 mmspindle bore: 74 mmturning speeds: 7,1-1400 U/min3-jaw chuck: 315 mmsteady: rapid traverse: turning dia. in gap: 920 mmlength of gap: 370 mmtotal power requirement: 22 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 8x2x1,8 mMultifix steel holder with insertsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward t ...

turning diameter over bed: 3800 mmturning diameter over slide rest: 3200 mmturning length: 12000 mmfaceplate diameter: 3100 mmsteady: 2 bed width: 4000 mmturning speeds: 200 U/minworkpiece weight: 90.000 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHydrostatik SpindellagerungHydrostatik LynetteThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch ...

turning diameter over bed: 1000 mmturning diameter over slide rest: 760 mmturning length: 6000 mmspindle bore: 82 mmturning speeds: 4,5-900 U/minfaceplate: 1000 mm3-jaw chuck: 500 mmsteady: rapid traverse: total power requirement: 22 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 8x2x1,8 mMultifix steel holder with insertsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsc ...

turning diameter: 1600 mmturning length: 6200 mmcontrol: Siemens type: Sinumerik turning diameter over slide rest: 1300 mmtransmission ratio: . 3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 630 mmbed width: 750 mmlive tooling: steady: 1200 mmsteady: 670 mmsteady: 408 mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mSerial number: 262/01Machine number: 08122394Quick-change tool postCoolant systemMonitorChip conveyorThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us ...

turning diameter over bed: 1450 mmturning diameter over slide rest: 1000 mmturning length: 8000 mmspindle bore: 160 mmturning speeds: 2,8-560 U/minfaceplate: 1400 mm3-jaw chuck: mmbed width: 850 mmturning diameter in the gap: 1800 mmlength of gap: 600 mmsteady: 1070 mmsteady: 1070 mmdigital readout: Rapid travel: chip conveyor: kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMultifix steel holder with insertsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can f ...

turning diameter over bed: 1000 mmturning diameter over slide rest: 760 mmturning length: 2750 mmspindle bore: 82 mmturning speeds: 3,55-710 U/minfaceplate: 1000 mm3-jaw chuck: 500 mmsteady: 2 turning diameter in the gap: 1400 mmlength of gap: 900 mmtotal power requirement: 22 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 8x2x1,8 mMultifix steel holder with insertsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We lo ...

turning diameter over bed: 1200 mmturning diameter over slide rest: . mmturning length: 5000 mmdigital readout: Digitalanzeige centre height: 600 mm: 55 PS spindle turning speed range: 5-1000 U/minRapid movement: längs 4000 mm/minaccessories:: Futter, Planscheibe accessories:: Stahlhalter, Lynetten Weight without Lynette: zwischen Spitzen 8000 kgWeight with Lynette: zwischen Spitzen 11500 kgRapid movement: quer 2000 mm/mintotal power requirement: kWweight of the machine ca.: ca. 20 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, p ...

turning diameter over bed: 2200 mmturning diameter over slide rest: 1650 mmturning length: 6000 mm0: 75 kWcoolant: spindle turning speed range: 2,8-600 U/minspindle bore: 102 mmHeight of centres: 1100 mmaccessories:: Planscheibe, Futter accessories:: Lynetten total power requirement: kWweight of the machine ca.: 45 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Ma ...

Key data: 340 mm, 2000 mm

Emco Emcomat E-300 2-Axis Teach-In/Cycle-Controlled CNC Lathe CNC control Fagor 8055 i Power TC Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2,500 rpm X-axis travel 310 mm Travel Z-axis 2000 mm If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Description Heyligenstaedt Lathe NDb-630 Details Year of manufacture 1980 Tip height above bed 630 mm Turning length 3,000 mm Turning diameter over bed 1,240 mm Turning diameter over bed slide 960 mm Max. workpiece weight without support 10,000 kg Bed width over guideways 850 mm Number of guideways 2 Bed height 650 mm Slide path 3,000 mm Face plate diameter 1,100 mm Main spindle diameter in the front bearing 280 mm Max. torque at the face plate 25,000 Nm max. workpiece weight clamped on the fly at center of gravity distance 250 mm in front of face plate 4,000 kg Main spindle speed range 2.24 - 450 rpm. Number of main spindle speeds 4 mech. Levels Power main motor 50 kW Main motor speed 100-1,000-2,500 rpm. Number of supports: 1 Cutting force support 4,000 kg Guide length front bed ...

Description Seiger lathe SLZ 800E x 4000 Details Machine no. 4443 Year of construction 2008 Siemens Cycle Control Spindle holder according to DIN 55027 size 11 Spindle bore Ø 130 mm Spindle diameter in the front bearing 170 mm Spindle taper 1:20 Drive power 20/28 kW Main spindle speed switching stage "I" 9-1,800 min-1 Main spindle speed switching stage "II" 9-400 min-1 Maximum torque: 3,200 Nm Center width 4,000 mm Circulation Ø above the bed 810 mm Circulation Ø above the face slide 540 mm Bed width 480 mm Machine dimensions 2,000+center width x 2,750 x 2,000 mm Permissible workpiece masses between points without setting stick 2,000 kg Permissible workpiece masses between points with a setting stick 2,200 kg Permissible workpiece masses between tips with two setting sticks 2,500 kg  ...

turning diameter: 270 mmturning length: 630 mmcontrol: SIN840D swing over bed: 400 mmswing diameter over slide rest: 220 mmlongitudinal slide -travel: 745 mmcross slide - travel: 200 mmturning speeds: 10 - 4.000 U/minpower capacity at 100 % load: 15,00 kWspindle head DIN 55026 - Size: 6 spindle bore: 62 mmchucking diameter: max. 315 mmfeed x-axis: 1 - 12.000 mm/minrapid traverse X-axis: 12,00 m/minFeed z- axis: 1 - 20.000 mm / min.rapid traverse Z-axis: 20,00 m/mintailstock quill taper MT: 3 quill stroke: 112 mmquill pressure: 10,00 kNtool turret with 12 work positions: tool taper DIN 69880: Ø 30 mmTool drive speed max.: 4.000 1/mintotal power requirement: 37,00 kWweight of the machine ca.: 4,00 tdimensions of the machine ca.: 4,00 x 2,75 x 2,30 mWith SIEMENS SINUMERIK 840D control system, turret with driven tools, C-Axis, tailstock, chip conveyor, various tool holders.The data for thi ...

swing diameter: 560 mmturning length: 800 mmcontrol: C200-4D Siemens 840 DMain spindle:: spindle head: 8 DIN 55026/55021 ISO 7027/1bar capacity: 90 mmspindle diameter in front bearing: 140 mmturning speed range - spindle: ~ 3.500 U/mindrive capacity - spindle motor: 100% / 40%: 43 / 57 kWTorque: 275 / 363 NmIndexing: 2,5 °C-Axis: 0,001 °turret:: Number of Turrets: 1 number of toolpositions: 12 pos.Spindle speed - driven tool stations: ~ 6.000 min -1power capacity - driven tool-stations: 11 kWtool taper: 40 x 63 mm DIN 69880Torque: 21,5 Nmtravel -x axis: 300 mmtravel -z axis: 800 mmrapid traverse: X/Z: 30 / 22,5 m/minfeed power: X: 7.200 Nfeed power: Z: 9.000 NTailstock:: dia. of quill: 65 mmCone: SK 30 longitudinal travel: 800 mmrapid traverse: 10 m/mintotal power requirement: 51 kVAweight of the machine ca.: ca. 14 tdimensions of the machine ca.: 7,3 x 4,0 x 2,6 mChip conveyor: Co ...

turning length: 4.500 mmgreates pass round over bed: 810 - 760 mmswing diameter over slide rest: 740 mmcontrol: SIEMENS - 840 C max. turning diameter: 800 mmturning diameter over slide: 740 mmtravel -x2 axis: 875 mmtravel -z2 axis: 5.200 mmCNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500equipped with a turret for driven tools as well as NC steady rest and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-40 | N 40 | N40MCT4500 | N40MCTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heid S-200 CNC Lathe Manufacturer: Heid Type: S 200 Machine Type: CNC Lathe Tailstock travel: 175 mm Tailstock quill holder: Morse cone: 4 MK Quill stroke: 140 mm Quill diameter: 95 mm Pressure capacity: 17 kN Connection 50 Hz 3x: 380 Volts Total power requirement: 65 kVA Spindle speeds: Infinitely variable from 0 rpm to: 4000 rpm Spindle bore: 77 mm Tool shank cross-section: 25x25 mm Turning diameter above the bed: 420 mm Turning diameter maximum: 250 mm Turret slide: Longitudinal travel (Z-axis): 1150 mm Flat travel (X-axis): 230 mm More items - new and used - can be found in our shop! International shipping costs on request!

We offer in the context of an insolvency liquidation: 2 x CNC lathe ( 1 x sub-spindle ( 1 x lower turret ), used + Bar feeder + Accessories 1 . CNC lathe with sub-spindle Make : MIYANO Type : BNC 34-S Year of construction : 1989 Control : Fanuc 0-T - Bar feeder HYDROBAR - 2 x collet chuck - 1 x 3 - Cheek chuck 2. CNC lathe with 2 x turret Make : MIYANO Type : JNC 45-T Year of construction : 1989 Control : Fanuc 0-T Bar Feeder HYDROBAR - 1 x collet chuck - 1 x 3 - Cheek chuck 3. Accessories - Approx. 65 x collet - Approx. 40 x Baking Sets - Various tool holders + tools -Documentation The machines are untested, but they were in use until the end. Sales are made ex site, loading can take place at an additional cost.

We offer in the context of an insolvency liquidation: 2 x CNC lathe ( 1 x sub-spindle ( 1 x lower turret ), used + Bar feeder + Accessories 1 . CNC lathe with sub-spindle Make : MIYANO Type : BNC 34-S Year of construction : 1989 Control : Fanuc 0-T - Bar feeder HYDROBAR - 2 x collet chuck - 1 x 3 - Cheek chuck 2. CNC lathe with 2 x turret Make : MIYANO Type : JNC 45-T Year of construction : 1989 Control : Fanuc 0-T Bar Feeder HYDROBAR - 1 x collet chuck - 1 x 3 - Cheek chuck 3. Accessories - Approx. 65 x collet - Approx. 40 x Baking Sets - Various tool holders + tools -Documentation The machines are untested, but they were in use until the end. Sales are made ex site, loading can take place at an additional cost.

We offer in the context of an insolvency liquidation: 2 x CNC lathe ( 1 x sub-spindle ( 1 x lower turret ), used + Bar feeder + Accessories 1 . CNC lathe with sub-spindle Make : MIYANO Type : BNC 34-S Year of construction : 1989 Control : Fanuc 0-T - Bar feeder HYDROBAR - 2 x collet chuck - 1 x 3 - Cheek chuck 2. CNC lathe with 2 x turret Make : MIYANO Type : JNC 45-T Year of construction : 1989 Control : Fanuc 0-T Bar Feeder HYDROBAR - 1 x collet chuck - 1 x 3 - Cheek chuck 3. Accessories - Approx. 65 x collet - Approx. 40 x Baking Sets - Various tool holders + tools -Documentation The machines are untested, but they were in use until the end. Sales are made ex site, loading can take place at an additional cost.

General Manufacturer: Stama Type: MT 733 two Year of Make: 2020 Control: Siemens Sinumerik 840D SL Travel: X 615 mm Y 290 mm Z 500 mm Rapid traverse: 65 m/min Feed: x 4,000 N / Y 4,000 N / Z 8,000 N Main spindle unit Speed: 12,500 rpm Tool holder: HSK-T63 Pull-in force: 18 kN Spindle bearing diameter: 80 mm Tool magazine Number of available magazine slots: 64 Tool diameter max. when fully equipped: 78 mm Tool diameter max. with free secondary positions: 140 mm Tool length: max. 300 mm Tool holder: HSK-A/T63 Tool weight: max. 10 kg Total chain load: max. 115 kg Rotary swivel unit Swivel angle: +30 to -180° Swivel axis repeatability: ±1" Swivel axis speed: max. 61 1/min Clamping torque tangential swivel axis: 3,000 Nm Clamping torque tangential counter bearing: 1,800 Nm Condition Condition: Used Functional: tested and fully functional

The machine is in good technical condition, can be inspected and tested.

Digital Center height 150 mm Circulation over bed 300 mm Center width 1000 mm 3-jaw chuck, Arbor Chip protection Chip tray

Control: Siemens Sinumeric 828 D Turning length: 1,600 mm Turning diameter: 900 mm X axis travel: 470 mm Z axis travel: 1,650 mm Speed: 3 – 1,500 rpm Tool turret: 12 places (all driven) Tool holder: BMT 85P Equipment: Self-centering bezel Conveyor Touchsetter 3-jaw chuck Programmable tailstock Aspirator Coolant pump 20bar with cyclone filter Oil mist extraction

Lathe SARO SP 1250x3000, working condition

Control Siemens 828D - ShopTurn Rotary diameter. [mm] 360 Turning length [mm] 520 Main spindle: Belt spindle technology Speed 3,500 rpm Power (max.) 33.6 kW Torque (max.) 515 Nm Bar passage 67 mm Workpiece Clamping 3-Jaw Chuck, Samchully MH-208 BVI Sub-spindle: Motor spindle technology Speed 6,000 rpm Power (max.) 8.1 kW Torque (max.) 68 Nm Workpiece Clamping 3-Jaw Chuck, Samchully HS-06VI Travel in W 565 mm Rapid traverse in B 24 m/min Tool carrier (X/Y/Z): Technology Turret with 12 stations Tool holder BMT65 Tool drive 5,000 rpm, 9.3 kW, 44 Nm Travel in X/Y/Z 235/100/580 mm Rapid traverse in X/Y/Z 18/12/24 m/min Equipment/accessories: Chip Management Chip Conveyor Coolant management IKZ pump with oil skimmer and high pressure, 10 bar Tool Measurement Automatic Measuring Arm, Marposs T18 Raw material feed interface bar feeder prepared Precast Remova ...

Turning lenght 450 mm Turning diameter 210 mm With C axis Spindle bore 52 mm Number of tools 12 Spindle speed 5000 rpm Controller Heidenhain Plus it

A combined vertical CNC turning and cylindrical grinding center EMAG is available. Chuck diameter: 250mm, max. swing diameter: 260mm, travel X/Z: 680mm/200mm, rapid traverse X/Z: 45m/min/30m/min, grinding spindle speed: 45000rpm, tool stations: 12, basket dimensions X/Y: 400mm/600mm, basket stack: 3. Machine dimensions X/Y/Z: approx. 3200mm/1900mm/2650mm, weight: approx. 8000kg, control: Siemens 840DS, operating hours: approx. 35000h, program hours: approx. 22000h. Documentation available. An on-site inspection is possible.

- Tool eye- SMW 3 chuck 630-165 mm- SMW Steady rest 85 - 350 mm- LNS Chip conveyor- DORMATEC Air Filter 30 m3