milling machines used for sale (2,494)

This 3-axis Hyundai Wia F500 was manufactured in 2012. It features a table size of 1,000 × 450 mm and a maximum table load of 600 kg. The spindle speed can reach up to 10,000 rpm, with a continuous power output of 15 kW. If you are looking to get high-quality machining capabilities, consider the Hyundai Wia F500 vertical machining centre we have for sale. Contact us for further details.

This 3-axis KNUTH X-MILL 1500 CNC was manufactured in 2011. It features an impressive X-axis travel of 1500 mm, Y-axis travel of 800 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1700 x 800 mm with a load capacity of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KNUTH X-MILL 1500 CNC vertical machining centre we have for sale. Contact us for further details.

This 3-axis HAAS VF5-HE vertical machining centre was manufactured in 2005. It features a spacious table size of 1372 x 610 mm and a maximum table load of 1800 kg. The machine offers impressive X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VF5-HE machine we have for sale. Contact us for further details.

This 3-axis HAAS VM-6 was manufactured in 2018. It features an impressive X-axis travel of 1,626 mm, Y-axis travel of 813 mm, and Z-axis travel of 762 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 vertical machining centre we have for sale. Contact us for further details.

x-travel: 1750 mmy-travel: 1400 mmz-travel: 700 mmcontrol: Heidenhain TNC 530 Torque: 101 Nmturning speeds: 15000 U/minspindle taper: HSK A63 engine output: 22 / 18 kWtable-size: 1200 mmtable load: 5000 kgtool change unit: 60-fach column daylight: 1430 mmdistance table - lower edge spindle: 105 - 905 mmA-Axis: 360 / 0,001 °B-axis (table): 0,001 °column daylight: 1430 mmtotal power requirement: 52,9 kWweight of the machine ca.: 22 tdimensions of the machine ca.: 6,2 x 3,75 x 4,3 m5 axes simultaneous- CNC control Heidenhain TNC 530- Milling head - Coolant design: external cooling + air, internal cooling + air (60 bar)- Tool changer 60-fold (HSK-A63)- chip conveyor- Electronic handwheel- CEThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stroke between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity spraying device Pneumatic material feed via foot switch Weight: approx. 280 kg

A CNC high-speed machining center OPS Ingersoll in gantry design is available. Materials: graphite/copper/aluminum/plastics/hard machining, travel X/Y/Z: 700mm/550mm/450mm, table dimensions X/Y: 850mm/700mm, max. workpiece weight: 2000kg, tool holder to table distance range: 20mm-520mm, tool holder: HSK-E40, spindle: Fischer mW 9/10-4, speed: 42000rpm, spindle power: 17kW, spindle runout accuracy: µm, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3200mm/2500mm/2700mm, weight: approx. 9000kg, control: Andronic 2060. Documentation available. An on-site inspection is possible.

This 3-axis HAAS VF-6SS was manufactured in 2016. It features impressive X, Y, and Z travels of 1,626 mm, 813 mm, and 762 mm respectively, along with a high-power 22.4 kW spindle capable of reaching 12,000 rpm. The machine includes a high-speed side-mount tool changer with 24+1 stations and a robust table load capacity of 907 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-6SS vertical machining centre we have for sale. Contact us for further details.

This 4-axis HAAS VF-10/50 was manufactured in 2022. It features an impressive X-axis travel of 3048 mm, Y-axis travel of 813 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 3048 x 711 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-10/50 vertical machining centre we have for sale. Contact us for further details.

This 4-axis DOOSAN NHP6300 was manufactured in 2014. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 900 mm, and Z-axis travel of 1,000 mm. The machine includes a maximum pallet load of 1,500 kg and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN NHP6300 horizontal machining centre we have for sale. Contact us for further details.

This 3-axis DMG MORI CMX 600V was manufactured in 2017. It features a spindle speed range of 12,000 rpm and a spindle motor power of 13 kW. The machine offers an X-axis travel of 600 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm, along with a table size of 900 x 560 mm. If you are looking to get high-quality milling capabilities, consider the DMG MORI CMX 600V vertical machining centre we have for sale. Contact us for further details.

POS POSmill CE 1000Year of manuf. : 2022 Control : Heidenhain TNC 640 Speed : 10000 rpmMovement X/Y/Z : 1000/600/600 mmTool holder : SK40 ____________Description:Spindle:Technology:Belt driveSpeed:10,000 rpmTool holder:SK40Media feed-through:Blown air + cooling lubricantWorking table:Clamping surface:1,200 x 600 mmTableloading (max.):750 kgGeneral:Tool magazine:40 stationsFeatures/Accessories:Coolant Management:IKZ system with filter and high pressure, 20 barChip Management:Chip conveyorWorkpiece Measurement:25.50-HDRTool Measurement:Pick UP wireless 35.40 TSPosition Measurement System:Heidenhain linear measurement system (direct) X/Y/ZSetup Mode:Electronic handwheel

This 5-axis POSmill H 800 U was manufactured in 2023. It features an impressive X-axis travel of 670 mm, Y-axis travel of 830 mm, and Z-axis travel of 600 mm. The machine includes a table diameter of 800 mm and a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the POSmill H 800 U vertical machining centre we have for sale. Contact us for further details.

For aluminium and PVC profiles Max. cutter diameter: 280 mm Max. milling length: 400 mm Max. milling depth: 110 mm Max. milling height: 150 mm Pneumatic material tensioners Automatic feed Minimum quantity spraying Weight: approx. 200 kg

InfoTEC 2515 Energy CNC router was built in 2017 in Poland by 4CNC Sp. z o.o. The machine is designed for the production of precise, repeatable parts made of a wide range of materials, i.e. wood, plastics and light metals. Its versatility and cost-effectiveness make it an excellent choice for companies with diversified production profiles. Materials are machined on a large work table using a brushless HSD spindle with automatic tool changing (ATC) system. This system allows the use of several tools in a single machining cycle, significantly saving the time required for changeover of the workhead. What’s more, the innovative control system has been integrated with powerful digital AC servo motors to achieve excellent dynamics and feed repeatability. The InfoTEC 2515E CNC milling machine weighs approximately 2200 kg. Technical specifications of the InfoTEC 2515 Energy milling machi ...

For sale is a classic universal tool milling machine Deckel FP4A with Dialog 11 control. The machine comes from a company closure and was reliably in use until the end. The machine was stored and was not energized for a long time. Due to the downtime, the buffer batteries of the control system will probably have to be replaced and the machine parameters reset. Manufacturer: Lid Model: FP4A Control: Dialog 11 Tool holder: SK40 Working range approx.: X: 400mm / Y: 300mm / Z: 400mm The machine is at ground level and dry. The transport must be taken care of by the buyer himself. An indoor crane, pallet truck, forklift, etc. are available on site for loading. The machine can be viewed by appointment. To make an appointment, call 0171 216 414 3 from Mon. - Fri. 9:00 a.m. to 5:00 p.m.

This 3-axis CHIRON DZ15W MAGNUM HS was manufactured in 2015. It features an X-travel of 730 mm, Y-travel of 400 mm, and Z-travel of 425 mm. The machine is equipped with a robust table surface measuring 1,060 mm x 430 mm. If you are looking to get high-quality machining capabilities, consider the CHIRON DZ15W MAGNUM HS vertical machining centre we have for sale. Contact us for further details.

This 4-axis DECKEL MAHO DMU-60T was manufactured in 2005. It features a robust vertical machining centre with X, Y, Z travels of 630 mm, 560 mm, and 560 mm respectively. Equipped with a high-speed spindle up to 18,000 rpm and a HSK-63A taper, it ensures precision and efficiency. The machine includes a Heidenhain MillPlus CNC control and a 20-tool magazine. Consider the opportunity to buy this DECKEL MAHO DMU-60T vertical machining centre. Contact us for further details regarding this machine.

Model: Metrom PG2000 Control: Andronic 2060 Year of Make: 2007 Axes: 5 Travel: X = 1,600 mm Y = 2,800 mm Z = 1,000 mm A = 90° C = 360° V = 3,200 (travel distance Pentapod on portal in Y direction) Table: X = 1,600 mm Y = 1,800 mm Groove spacing = 250 mm 20 mm grooves, 7 pcs. Spindle: HSK 63 Speed: 15,000 rpm IKZ and AKZ 25/32 kW Work table enlarged 200L Coolant Tank Automatic 3D button (Blum TC 50) Handwheel Incl. additional milling spindle Incl. holder Machine will be ready for collection from September.

Model: Hedelius BC60 Year of Make: 1998 Type: 3-axis machining center Control: Heidenhain TNC426 Total connected load: 40 kVA Weight: approx. 16500 kg Travel: X = 2,490 mm Y = 630 mm Z = 750 mm Table: X = 3,200 mm Y = 650 mm Groove spacing = 125 mm 20 grooves Spindle: Tool holder: SK40 Speed: 8000 1/min ICS and AKZ Tool changer 48 places Handwheel available 350L Coolant Tank Divisible workspace Chip conveyor The machine will be ready for collection from September.

This 3-axis DAEWOO Mynx 500 was manufactured in 1999. It features an X-axis travel of 1020 mm, Y-axis travel of 510 mm, and Z-axis travel of 575 mm. The machine includes a T-slotted table size of 1200 mm x 500 mm and a maximum table load capacity of 800 kg. If you are looking to get high-quality machining capabilities, consider the DAEWOO Mynx 500 vertical machining centre we have for sale. Contact us for further details.

This 3-axis Optimum Optimill F105 was manufactured in 2015. It features an X-axis travel of 550 mm, Y-axis travel of 305 mm, and Z-axis travel of 460 mm. The machine is equipped with a spindle power of 7.5 kW and a maximum spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the Optimum Optimill F105 vertical machining centre we have for sale. Contact us for further details.

This 4-axis Burkhardt-Weber MC100 was manufactured in 1998. It features a working range with an X-axis travel of 3,000 mm, Y-axis travel of 2,500 mm, and Z-axis travel of 1,500 mm. The machine has a maximum table load capacity of 20,000 kg and a spindle speed of 3,500 RPM. If you are looking to get high-quality milling capabilities, consider the Burkhardt-Weber MC100 horizontal machining centre we have for sale. Contact us for further details.

x-travel: 12000 mmy-travel: 2500 mmz-travel: 1000 mmcontrol: Heidenhain TNC 415 taper ISO: 50 P.D.B. spindle speeds: 20 - 1800 mmvoltage: 380 Vtotal power requirement: 37 kWweight of the machine ca.: tdimensions of the machine ca.: mA.T.C. 60 pos.Indexing universal headThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software sol ...

Key data: 7000 mm, 1600 mm, 1400 mm

Complete system with all the accessories necessary for installation and operation, see below! x = 7000 y = 1600 z = 800 / w = 600mm General overhaul 2007, production year 1991: New Siemens Sinumerik 840D control system, new drive motors, guide guides renovated, new control cabinets. ECOCUT 1 was then operated for only a few months Rapid traverse 12000 mm / min / w axis 6000 mm / min Turntable TDV 2 max. workpiece weight 6t / clamping surface 1000x1000 Turntable TDV 3 max. workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 angle milling heads / chain tool changing system / plate field / complete housing / Knoll hopper feeder / extraction / coolant system with belt filter. With all BWF fixators for the installation of machine bed and plate

Used Reckermann Delta 1300 K, milling machine built in 1989, Working distances 1000x400x450mm, vertical speed range 60-3000 horizontal 30-1500 1/min, control Heidenhain TNC 151 weight 5000kg, Accessories: Tool holders.

milling machine, year 2009. Used machine in good condition. More info & price on IndustrialBuyer.

milling machine, year 1997, CNC TNC. Used machine in good condition. More info & price on IndustrialBuyer.

This EUMACH FBE-4000 Vertical Machining center was manufactured in the year 2013 in Taiwan. It is equipped with a Fanuc Series 31i control unit and has 3 axis. The machine has a spindle speed of 3500 rpm.

Control: Heidenhain 355 x-travel: 850 mmy-travel: 550 mmz-travel: 450 mmtool taper: SK50 hydraulic vise: documentation: weight of the machine ca.: 5,5 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.