milling machines used for sale (2,488)

This EUMACH FBE-4000 Vertical Machining center was manufactured in the year 2013 in Taiwan. It is equipped with a Fanuc Series 31i control unit and has 3 axis. The machine has a spindle speed of 3500 rpm.

Control: Heidenhain 355 x-travel: 850 mmy-travel: 550 mmz-travel: 450 mmtool taper: SK50 hydraulic vise: documentation: weight of the machine ca.: 5,5 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Heidenhain TNC 355 x-travel: 1.000 mmy-travel: 400 mmz-travel: 450 mmsurface area: 1.300 x 400 mmfeed range: 1 - 6.000 mm/minnumber of spindle speeds: 60 - 3.600 U/min vertikalnumber of spindle speeds: 30 - 1.800 U/min horizontaspindle taper: SK50 vertical and horizontal milling possible: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine MH1600 The basic machine was built in 1990 but was rebuilt from scratch in 2015 by the company MMD Bad Emstal, as well as control conversion to iTNC530 (Guideways sanded and scraped, KGT new or overhauled, bearings new, etc. etc..) (so the machine was new again in 2015) iTNC530 IKZ air and water through spindle center Rotoclear Chip conveyor SK 50 Chain 32 WZ Transport beam Crane loading possible Machine is provisionally connected to the power connection and can be visited by appointment

max. wheel diameter: 160 mmgear width: 355 mmmax. module: 4,5 min. module: 0,5 centre distance: 450 mmtotal power requirement: 11 kWweight of the machine ca.: 3,8 tdimensions of the machine ca.: 2x17,1,6 mWheel diameter - max. 160.175 mmWheel width 355 mmModule - max. 4.5Spindle bore 75 mmCenter distance 410 mmNumber of teeth - min. 2, 3Cutter diameter max. 115 mmCutter length max. 105 mmCenter distance between milling cutter and workpiece - max. 138 mmCenter distance between milling cutter and workpiece - min. 30 mmMilling head - swivels 120 °Milling cutter speeds 70 - 400 rpmAxial feeds 0.25 - 4.0 mm/revRadial feeds 0.09 - 1.5 mm/revTotal power requirement approx. 9.5 kWMachine weight approx. 3.5 tSpace requirement approx. 1730x1400x1440 mmEquipment/accessories:- Changing wheels- milling arbors- Clamping deviceDra8M7- documentation The data for this ad was created with ModulMWS - the  ...

This 5-axis SHW PowerSpeed 4000 CNC horizontal machining center was manufactured in 2022. It features an impressive X-axis travel of 1,500 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 750 mm. The machine includes a rotary table with a diameter of 1,400 mm and a maximum table load of 4,000 kg. If you are looking to get high-quality machining capabilities, consider the SHW PowerSpeed 4000 machine we have for sale. Contact us for further details.

This 3-axis KNUTH KB 1400 was manufactured in 2018. It features a travel of 950 mm on the X-axis, 400 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a spindle speed range of 30 to 1800 rpm and a table setup area of 1400 mm x 400 mm. If you are looking to get high-quality milling capabilities, consider the KNUTH KB 1400 vertical machining centre we have for sale. Contact us for further details.

This 3-axis Hurco VM10i was manufactured in 2016. It features an X-axis travel of 661 mm, Y-axis travel of 407 mm, and Z-axis travel of 508 mm. The machine includes a robust table size of 762 x 406 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VM10i vertical machining centre we have for sale. Contact us for further details.

This 5-axis CHIRON FZ 15K S was manufactured in 2001. It features a spindle speed of 12,000 rpm and a tool magazine with 48 positions, providing efficient machining capabilities. The machine is equipped with a Peiseler swivel rotary table and an internal through-spindle cooling system. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 15K S vertical machining centre we have for sale. Contact us for further details.

This 5-axis CHIRON FZ 15FX was manufactured in 2002. It features a spindle speed of 12,000 rpm and a 48-station tool magazine for efficient operation. The machine is equipped with a Peiseler rotary table and an internal through-spindle cooling system, ensuring optimal performance. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 15FX vertical machining centre we have for sale. Contact us for further details.

x-travel: 7000 mmy-travel: 3200 mmz-travel: 1500 mmControl: Heidenhain TNC 530 table-size: 6000 x 3000 mmtable load: - tspindle turning speed range: 6000 / 18000 U/mintool taper: ISO 50 / HSK 63 feed: 50000 mm/minspindle motor: 34 kWA-Axis: + / - 180 °c-axis: 0-360 °distance between columns: 4300 mmPassage height: 2300 mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: 12,2 x 9,3 x 5,9 mEquipped with:- Heidenhain TNC 530 CNC control- 1 milling head (TAEM) ISO 50, 6,000 rpm- 1 electric spindle head (TUPC) 18,000 rpm, HSK 63- 1 extended head ISO 50, 6,000 rpm- 40-position tool changer (15x HSK A63, 25x ISO 50)- Coolant system (40 bar IKZ / 4 bar external)- CE mark- EnclosureThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Belotti FLU 2617Year of manuf. : 2022 Control : Siemens 840Dsl Speed : 24000 rpmMovement X/Y/Z : 2600/1700/950 mmTool holder : HSK-A63 ____________Description:Spindle:Technology:Swivelhead with MotospindleSpeed:24.000 rpmPower (max.):15 kWTorque (max.):14,3 NmTaper:HSK-A63A-Axis:+/- 120°C-Axis:270°In general:Toolmagazine:18 stationsClampingsurface:2.350 x 1.700 mmRapid travers in X/Y/Z:80/80/60 m/minEquipment/Accessory:Workpiecemeasurement:Touch probe, m&h RWP 20.50Toolmeasurement:Laser, HexagonToolbreakagecontrol:Probe, m&h TS 35.20Setup operations:Electronic Handwheel3D-Extruder:CEAD S25Granulatedryer-/conveyor:VismecFurther Accessory:Spindlechiller

Brother Speedio S700X2Year of manuf. : 2021 Control : Sonstige Brother C00 Speed : 10000 rpmMovement X/Y/Z : 700/400/300 mmTool holder : BBT 30 ____________Description:Mainspindle:Technology:DirectdriveSpeed:10.000 rpmPower (max.):26,2 kWTorque (max.):92 NmTaper:BBT 30Workingtable:Clampingsurface:800 x 400 mmTableloading (max.):250 kgIn general:Toolmagazine:21 StationsRapid travers in X/Y/Z:50/50/56 m/minEquipment/Accessory:Chipmanagement:Chip coveyorCoolingmanagement:Minimumlubrication (IKZ), Company Lubrix V54.-Axis:Lehmann EA-510 with CounterbearingWorkpiececlamping:Hydrulic, 80-210 barContactcontrol:PneumaticAutomationinterface I:Automatic Door (electrical)Automationinterface I:RobotinterfaceOilmistseparation:Mechanical extraction, company Sara UC1 SDColumnextention:150 mmSetup operations:Electronic HandwheelFurther Equipment:Trafo

x-travel: 1800 mmy-travel: 700 mmz-travel: 1200 mm: ja : 2 control: Heidenhain 155 table:: 700-2000 mm documentation: ja dismantled: ja weight of the machine ca.: 12,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, step blocks -Manufacturer: AMF, Stepped block clamping pad 2 pieces / 1 set -Type: 6500E-2 -Order No.: 6500E Size 2 - 73304 -Width: 30 mm -Quantity: 10 sets available -Price: per set, minimum order 2 sets -Dimensions each: 65/30/H40 mm -Weight: 1.2 kg/set

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, step blocks -Manufacturer: AMF, Stepped block clamping pad 2 pieces / 1 set -Type: 6500E-1 -Order No.: 6500E Size 1 - 73266 -Width: 30 mm -Quantity: 11 sets available -Price: per set, minimum order 3 sets -Dimensions each: 33/30/H24 mm -Weight: 0.2 kg/set

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 99 mm -Type: 36/8/20P -Number of teeth: 36 teeth / Belt width: 20 mm -Mount: Taper clamping bushing: Taperlock 1610-24 Ø 24 x 28 mm -Quantity: 1x timing belt pulley included -Dimensions: Ø 99 x 28 mm -Weight: 1.0 kg

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, cranked clamping irons -Manufacturer: AMF, clamping iron type 6314Z-9x100, 20 pieces -Order No.: 70243 -Groove: 9 x 60 mm -Number: 20x clamping irons available -Price: per piece / Minimum order quantity 4 pieces. -Dimensions: 100/25/H12 mm -Weight: 0.2 kg

This 3-axis Bridgeport VMC 1000 22 was manufactured in 2001. It features a working area X travel of 1020 mm, Y travel of 610 mm, and Z travel of 610 mm. The machine includes a robust table size of 1150 x 580 mm with a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 22 vertical machining centre we have for sale. Contact us for further details.

This 4-axis Bridgeport VMC 1000 was manufactured in 2003. It features an X-axis travel of 1,000 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN 530 control unit, a BT40 spindle holder, and a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 vertical machining center we have for sale. Contact us for further details.

This 5-axis Bridgeport VMC 800/30 was manufactured in 2000. It features an X-axis travel of 800 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a Heidenhain 426 control and has a spindle speed of 6000 RPM, along with 30 tool places. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 800/30 vertical machining centre we have for sale. Contact us for further details.

This 5-axis Bridgeport VMC 1000/30 was manufactured in 2002. It features an impressive X-axis travel of 1000 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN TNC 530 control and a NIKKEN 5-axis rotary table. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000/30 vertical machining centre we have for sale. Contact us for further details.

This 4-axis Bridgeport VCM 800-30 was manufactured in 2004. It features an X-axis travel of 800 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a NIKKEN 4th Axis Rotary Table and a HEIDENHAIN 530 Control, along with a BT40 Spindle Holder and 30 tool positions. If you are looking to get high-quality machining capabilities, consider the Bridgeport VCM 800-30 vertical machining centre we have for sale. Contact us for further details.

This 5-axis Bridgeport VMC 800/30 was manufactured in 2000. It features an X-axis travel of 800 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN 426 control and offers 30 tool positions, along with a BT40 spindle holder. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 800/30 vertical machining centre we have for sale. Contact us for further details.

Machine Type: Milling Machine Manufacturer: Lid Type: 2102 / FP1 Year of manufacture: coming soon Condition: used / good Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference number M-DEC-0626 DESCRIPTION We offer you a used milling machine from the manufacturer Deckel. Control: TNC 113 Central lubrication Weight approx. 750kg Availability: CW27 / 2026 Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

Droop (small), Manufacturer: DROOP + REIN, Model: FOG 2500 HS11/13NW, Year of manufacture: 1995, Serial number 01028, Control, Manufacturer Droop + Rein, Type System IBF/Grundig Electronics, Table dimensions 5,000 x 3,000 mm, Travel X/Y/Z 4,500 x 2,500 x 1,200 mm, Spindle speed 10,000 rpm, Tool holder HSK 63/100, 32-fold tool changer, Tool monitoring, manufactured by Brankamp, WTS roller shutter cabinet, metal, equipped with 40 tool holders, drawer unit W 1,000 mm, 7 drawers, equipped with inserts, milling cutters, etc., mobile WTS frame, equipped with clamping devices and accessories 2 spare spindles, 16,000 rpm Droop (small), Manufacturer: DROOP + REIN, Model: FOG 2500 HS11/13NW, Year of manufacture: 1995, serial number 01028, control system, manufacturer Droop + Rein, type System IBF/Grundig Electronics, table dimensions 5,000 x 3,000 mm, travel range X/Y/Z 4,500 x 2,500 x  ...

This 3-axis POSmill C 1050 was manufactured in 2014. It features a travel of 1050 x 530 mm and a spindle speed of 10,000 rpm, making it suitable for various machining tasks. The machine includes a paper belt filter and optional chip conveyor. If you are looking to get high-quality machining capabilities, consider the POSmill C 1050 vertical machining centre we have for sale. Machine currently not funcional. Contact us for further details.

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, cranked clamping irons -Manufacturer: AMF, Clamping tool, cranked clamping iron, 2 pieces -Type: 18x160 -Dimensions: see photos -Price/Fee: complete -Dimensions each: 163/50/H170 mm -Weight: 1.8 kg

x-travel: 300 mmy-travel: 160 mmz-travel: 340 mmtool taper: SK40 Speed: 40-2000 U/min.control: Aktiv HEIDENHAIN table-size: 600 x 210 mmtotal power requirement: 2 kWweight of the machine ca.: 0,73 tdimensions of the machine ca.: TBH 1,20x1,10x1,60 mComes from a vocational school- Powered feed in X, Y, and Z axes- Coolant system- Machine vice- Work lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis DMG MORI DMU 75 monoBLOCK was manufactured in 2017. It features a Siemens SINUMERIK 840 D control system and a high-pressure pump for internal coolant supply at 20 bar. The machine includes a 3D measuring probe from Heidenhain and has 60 magazine positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 monoBLOCK universal machining centre we have for sale. Contact us for further details.