other machines for plastic used for sale (441)

Power 2100 W Auction-ID: A1-49516-6

Range 20-110 mm, butt welding machine dimensions 680x900x570 mm, without rolling table, incl. accessories and transport box Auction-ID: A1-49516-7

A PUR foaming system with Yaskawa industrial robot is offered. Min. dispensing rate: approx. 0.15g/s, max. dispensing rate: 1.6g/s, material system: polyurethane Penguin Foam 3151/3157, drum capacity: 200l, operating voltage: 3 × 400V/N/PE, frequency: 50Hz, control voltage: 24V DC, upstream fuse: 16A. Approx. 30000 assemblies were foam-applied using the system. The system was shut down in 2024 according to the manufacturers instructions. Documentation available. An on-site inspection is possible.

Year: 2013 - technically efficient, ready to work – after full service - 4 spindles - internal rebate support, resulting in fewer milling unit adjustments - simultaneous milling of 2 offset, length-adjustable water slots in 2(3) planes - selection of milling units for the right or left end of the profile bar using a two-handed switch - selection of unit for visible or hidden drainage using a manual switch - adjustment of units to milling position using handwheels and adjustment aids - two-handed operation

The used single-shaft shredder MR2260 is a powerful and energy-efficient shredder for the pre-shredding of cables, electronic waste, waste plastics, wood and much more... It has two stator knives for better product quality and higher hourly output. The shredder is equipped with an electronic control system. This monitors the hydraulic feed and the cutting shaft. As a result, the single-shaft shredder rarely has to reverse and retains its high throughput. Machine pre-equipped for cooling Weight: approx. 1,800 kg Dimensions: approx. 1750 x 1300 x 1800 mm Capacity: max. 200 – 400 kg/hour Year of Make: 2019 Machine in good condition and ready for immediate use!

Uniloy Milacron AQS2-810 PDR SGS Uniloy Leakage Control (2014)8-head, side-shift, high-throughput leak tester designed for continuous inline inspection of HDPE/PP bottles.Featuring BMC Controls AQS2-810 ConveyorApplications: HDPE dairy bottles, juice bottles, household chemical bottles, personal-care bottles, and any blow-molded container requiring high-speed leak verification Auction-ID: A1-48805-106

Dimensions butt welding machine 670x840x950 mm, heating power 1300 W, without table, incl. accessories and transport box Auction-ID: A1-49516-9

Current consumption 16 A, heating capacity 9 kW, medium water, heating temperature 100/120 °C, filling volume 6 l Auction-ID: A1-49516-4

Current consumption 13 A, total power 8.5 kW, medium water, temperature range up to 180 °C, filling volume 1 l, max. flow rate 40 l/min, system pressure 14 bar Auction-ID: A1-49516-5

Medium oil, volume 300 l, temperature range up to 300 °C, total connection 35 A, total power 22.8 kW, flow rate 90 l/min Auction-ID: A1-49516-3

Uniloy Milacron RTM 4 Uniloy Trimmer (2012) Auction-ID: A1-48805-90

Auction-ID: A1-49333-11

For sale is a molding machine, manufacturer Erlenbach, type EHV-C 120/670.The machine is in good condition and can be viewed under power by appointment

For sale is a Kurtz automatic molding machine of the type A-Line, built in 2010, The machine is equipped with a tool for EPS plates and a manipulator. The condition is very good and can be visited under power by prior appointment.

DL-2400 THREE LAYER CASTING MACHINE SINGLE EXTRUDER CASTING MACHINE

X-axis stroke 100mm, Y-axis stroke 700mm, Z-axis stroke 90°, current consumption 1.6A, voltage 105-250V Auction-ID: A1-49333-22

Maguire WSB-940T Gravimetric Blender (2012)2x Moretto R10 C52 Hopper loader2x Moretto R50 C52 Hopper loader Auction-ID: A1-48805-110

Calender

Auction-ID: A1-49333-23

Auction-ID: A1-49333-30

Auction-ID: A1-49333-39

Control voltage 220 V, current consumption 2kW Auction-ID: A1-49333-21

Voltage 400 V, belt width 500 mm Auction-ID: A1-49333-6

Moretto R50 C52 Hopper Loader (2019) Auction-ID: A1-48805-93

Breaking capacity: 8kA, power supply: 400V, 50Hz, connected load: 5500VA, weight: 95kg. An on-site inspection is possible.

Max bending width 1350 mm Equipped with foot control On a mobile chassis Auction-ID: A1-48784-45

saw-blade dia.: 250 mmturning speeds: 2800 U/minpressure: 6-7 barweight of the machine ca.: 273 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Maguire WSB-940T Gravimetric Blender (2014)2x Moretto R10 C52 Hopper loader2x Moretto R50 C52 Hopper loader Auction-ID: A1-48805-94

SACMI complete line for crown cork caps. Pry-off 913 type(PVC-free). Includes press PTC110, lining PM1200, two magnet elevators, silo, separator, automatic counter, chiller.

Roller conveyor diameter: 50x200mm, roller shutter box support stroke electrohydraulically adjustable: 180mm, length: 2600mm, width: 2800mm, height: 900-3100mm. Equipment: roller shutter box support electrohydraulically adjustable, 6 dimension memories, pneumatically swivelling horizontal-vertical with 2 cylinders, weather bar recess, adjustment of the roller shutter box support with memory function, 6 dimension memories, with digital display, working depth is motor-adjustable and fixed from 450-2600mm, manually foldable, support sliding profile. An on-site inspection is possible.