other wood working machines used for sale (1,358)

Working width 180 - 3200 mm, electronic setting Sieb & MeyerFixed side at the leftChain transport, 80 mm wideInfeed for panels of about 1 m.Top pressure by driven beltsMax. workpiece thickness: 80 mmFeedspeed 7 - 35 m/min, motor 2,2 kWPop-up dogs every 1m10Equipment left / right:1 st postFront: 1+1 Jump scorer, motor 1,5 kW, 100 Hz, joined to 1+1 Hogger, motor 3 / 4,4 kW, 50/100 HzRear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz2nd postFront: 1+1 Jump milling, tilting, motor 1,5 kW, 100 HzRear: 1+1 Fixed milling, tilting, motor 2,2/3,3 kW, 50/100 Hz3th postFront: 1+0 Jump milling, tilting, motor 2,2/3,3 kW, 50/100 HzRear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 HzAll units with horizontal/vertical adjustment and Siko read-outOutfeed chain approx. 80 cm lengthSound and safety enclosures

Right-hand versionCutting-off saw: 1.5 kW2 x horizontal shaft: 2 x 1.5 kW1 x vertical shaft, diameter 50 mm, length 160 mm, 2.2 kW

Right-hand versionWorkpiece dimensions: max. length 3000 mm, min. 250 mm, max. thickness 100 mm, min. 30 mm, width 200 mmOverhead cutting saw, 3 kW, 3000 rpm, manual horizontal movement over 120 mm, 400 mm blade, cutting height 100 mm1 vertical shaft, 340 mm long, 40 mm diameter, 7.5 kW, 3100 rpm, suction port with 150 mm diameter (x2), max. tool diameter: 320 mmCarriage with pneumatic clamping1100 x 500 mm tableStop, positioning from -45? to 45?Motorized carriage with electronic control 2-32 m/min

Semi-automatic

A Linck chipper canter line for continuous chipping, turning, profiling and sawing of round timber as well as for the production of main products and side boards is offered. 1) LINCK V30 chipper canter, feed speed: 50m/min/70m/min, drive power: 2 × 132kW, min. log diameter: 80mm, max. log diameter: 360mm, cutter heads: 18 chipping knives and 18 finishing knives, max. output: 1000fm/24h, 2) Linck DVN 55 turning device, function: turning and positioning of the preprocessed round timber between the chipper canter stages, 3) Linck V25 chipper canter, max. feed speed: 70m/min, drive power: 2 × 132kW, cutter heads: 18 chipping knives and 18 finishing knives, 4) Linck VPP 34 profiling unit, three-phase motors: 4, power: 32kW/50kW, speed: 1000rpm/1500rpm, feed: 4 geared motors, feed motor power: 1.3kW/2kW, max. feed motor speed: 66rpm, function: profiling of the side boards before the sawing p ...

AGICOM Recycling Machines The used single-shaft shredder MR2260 is a powerful and energy-efficient shredder for the pre-shredding of cables, electronic waste, waste plastics, wood and much more... It has two stator knives for better product quality and higher hourly output. The shredder is equipped with an electronic control system. This monitors the hydraulic feed and the cutting shaft. As a result, the single-shaft shredder rarely has to reverse and retains its high throughput. Machine pre-equipped for cooling Control: Siemens Weight: approx. 1,800 kg Dimensions: approx. 1750 x 1300 x 1800 mm Capacity: up to 400 kg/hour (depending on material and perforated screen) Safety: retraction of the feed in the event of overload, reverse rotation of the rotor in the event of blockage Year of Make: 2019 Machine in good condition and ready for immediate use!

Manufacturer: Wemhoener Model: DEK 06 Type of Machine: Single-Level Short-Cycle Press Year of Manufacture: 2001 Condition: Good condition, still produces occasionally Press Counter: currently 13.65 million pressings Technical Specifications: - Heating plate format: 5,700 x 2,300 mm - Plate format capacity: 5,600 x 2,220 mm - Total press pressure: 49,728 kN - Specific press pressure: 400 N per square centimetre - Working pressure: 320 bar - Maximum operating temperature: 220 degrees Celsius - Required drive power: 63 kW - Operating voltage: 400 V, 50 Hz - Tank filling: 2,000 / 4,000 litres - Pump type: 2xA2F032/61L-P6H4-2x/050R - Secondary heating medium: thermal oil - Electrical control: Siemens S7/400 PLC Output and Capacity: - Minimum cycle time: 20 seconds, equal to 180 cycles per hour in single-format setup - Minimum cycle time: 25 seconds, equal to 144 cycles per hour in do ...

Auction-ID: A1-49309-235

Auction-ID: A1-49309-248

Cultivator protection Auction-ID: A1-49309-114

Chopper Untha – Four-Wave Hacker Type: RS 30-4-S Year of manufacture: 8/2007 CE 4 waves of hackers 2 motors of 11 kW each Perforated mesh diameter 20 mm Cutterbar opening 450 x 560 mm Filling opening L1000 mm x W 1280 mm Hopper height 1040 mm Main shaft speed approx. 23 rpm. Speed secondary shaft approx. 34 rpm. Operating hours 2681 h Workplace-related sound pressure level approx. 84 dB (A) Sound power level approx. 97 dB (A) The material to be shredded is pulled in by the cutting unit and pre- and post-shredded in a single operation by the main and secondary cutting unit. Dimensions: L 1340 mm x W 1090 mm x H 1920 mm Weight: 1240 mm

Power: N/C; heating registers for supply air ceiling + 2 drying zones Operating parameters: O-structure; approx. 12 material frame supports; frame length 3,500 mm; frame width 600 mm; 2 opposite painting surfaces; 1 longitudinal roller conveyor; cross conveyors in drying zones; capacity approx. 2 frame elements per drying zone Workpiece capacity: Frame elements/components up to 3,500 mm length; continuous infeed/outfeed system Supported edges: Wood, metal or industrial components (typ. spray application) Edge types: Spray painting; airless + fine spray application; drying Included equipment: Type designations TR3750; GT180/3500/4100/CT; TR377; Serial No. 04019/250; 6x WALTER pump stations; 6x WAGNER fine spray guns; 3x WAGNER airless pumps w/ hand guns; 8x explosion-proof lamps (supply air ceiling); 2 painting stands w/ floor extension; integrated heating registers; conveyor system Compl ...

Auction-ID: A7-49492-3

gebr. Feeder 4 Rolls WEGOMA VS48 0.55 / 075 kW (380V / 16A plug) 8 Speeds: 2 / 3.3 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 m/min. Rubber rollers in good condition ex location Fixed Price

Edgebander manufactured in 2008. This HOMAG Optimat KAL210/6/A20/S2 is designed for jointing straight workpiece edges, gluing, and finishing various edging materials up to 20 mm thickness. It features a feed rate of 18 - 25 m/min and accommodates workpiece thickness from 8 to 60 mm. If you are looking to get high-quality edge banding capabilities, consider the HOMAG Optimat KAL210/6/A20/S2 machine we have for sale. Contact us for further details.

Edgebander manufactured in 2003. This IMA AVM/K/I/G80/822/S3R3L20 is designed for milling, edge banding, and postproduction for rebate doors. It features a heavy machine base, a drive for feed speed of approximately 5-25 m/min, and a glue application unit for various edge materials. If you are looking to get high-quality edge banding capabilities, consider the IMA AVM/K/I/G80/822/S3R3L20 machine we have for sale. Contact us for further details regarding this machine.

Edgebander manufactured in 2004. This BRANDT KDF 560 features automatic unit adjustment via PC control and is suitable for thin and thick edging, accommodating edge thicknesses from 0.4 to 8 mm and workpiece heights of 8 to 50 mm. It includes various installed units such as a pre-milling unit, glue application unit, and polishing units. If you are looking to get high-quality edging capabilities, consider the BRANDT KDF 560 machine we have for sale. Contact us for further details.

Tenoning machine manufactured in 2004. This SAC T4TL features a spindle length of 640 mm and a tilting table designed for tenoning and squaring. If you are looking to get high-quality tenoning capabilities, consider the SAC T4TL machine we have for sale. Contact us for further details.

Coating/varnishing machine manufactured in 2011. This CEFLA Smartparquet MRF-2VS/300 features a working width of 300 mm and a total installed power of 6 kW. If you are looking to get high-quality coating capabilities, consider the CEFLA Smartparquet MRF-2VS/300 machine we have for sale. Contact us for further details.

Edgebander manufactured in 2018. This BIESSE JADE 340 features a Biesse HD touchscreen control unit and operates at a feed rate of up to 12 m/min. It accommodates panel thicknesses from 10 to 60 mm and edge thicknesses from 0.4 to 8 mm. If you are looking to get high-quality edge banding capabilities, consider the BIESSE JADE 340 machine we have for sale. Contact us for further details.

: 160 mm: 1.500 m³/h: 2.800 pa: automatisch - mechanisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Version: T1-T1C-T5C-T6CN2, tool magazine: RACK T95, number of tool positions: 95, workpiece dimensions for parts longer than 3500mm: width: 50-140mm, thickness: 50-92mm, tool identification: chip, Balluff, extraction hoods: automatic movement for machining long parts, control: Siemens 840 D SL. Equipment: transport system, 1x motorized roller conveyor, 6000mm with pusher device. Loading system: motorized roller conveyor, length: 3880mm, with single pusher device, 2x motorized central structure, with driven belts, 3000x2000mm, speed: 15m/min, power: 0,37kW, 1x small motorized central structure, with driven belts, 1500x2000mm, speed: 15m/min, power: 0,37kW, 1x liftable roller conveyor, length: 3800mm, power: 0,37kW, 1x liftable roller conveyor, length: 2290mm, power: 0,37kW. Parking system: 1x motorized roller conveyor, length: 3070mm, with single pusher device, speed: 60m/min, power: 0,37 ...

radial fan, dust extraction blower, fan, extraction, dust blower -Manufacturer: TEKA, radial fan in soundproof container -Motor: 22 kW -Speed: 1460 rpm -Volume flow rate: 20,000 m³/h -Pressure: 3,000 Pa -Fan wheel: Ø 720 mm -Inlet connection: Ø 500 mm -Outlet connection: Ø 500 mm -Dimensions: 2150/1770/H2300 mm -Weight: 1051 kg

Ventilation duct, ventilation damper, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper, pressure relief damper, fire damper, shut-off device -Manufacturer: TROX, ventilation duct fire damper shut-off device -Type: FK -Dimensions: 390/390/500 mm -Weight: 16.9 kg

Ventilation duct, ventilation damper, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper, pressure relief damper, fire damper, shut-off device -Manufacturer: TROX, ventilation duct fire damper shut-off device -Type: FK-EU -Dimensions: 470/500/H420 mm -Weight: 18.4 kg

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, pipe silencer, silencer -Ventilation duct: Pipe silencer with spiral slit -Connection diameter: 100mm -Dimensions: Ø 210 x 675 mm -Weight: 3.3 kg