other wood working machines used for sale (1,437)

- Chip container: included

Numer katalogowy 7742 DANE TECHNICZNE - szerokość wlotu 350 mm - wysokość wlotu 140 mm - szerokość wału 345 mm - średnica wału 290 mm - ilość noży 2 szt - wymiar sita 55x55mm - wał ciągnący zębaty z góry i dołu - silnik wałów 2×1,5kW - elektryczne autorewers (z możliwością regulacji) - z wibrorynną - długość, szerokość wibrorynny 3750×355 mm - wymiar cała wibrorynny 3750x620x1210mm - odbiorczy z taśmociągiem 2970x340mm - wymiar całkowity taśmociągu 3000x630mmx750mm - silnik główny 22 kW - wymiary dł/szer/wys 3000x1100x1500mm - waga około 2500 kg ATUTY – produkcja niemiecka – wibrorynna – z odbiorczym podajnikiem taśmowym – autorewers – rębak używany, stan bardzo dobry Cena netto: 47900 PLN Cena netto: 11405 EUR w zależności od ceny 4,20 EUR (Ceny mogą się zmieniać wraz z wyższymi wahaniami)

Part Number: 7973 SPECIFICATIONS - inlet width 410mm - Inlet height 210mm - shaft width 430mm - shaft diameter 330mm - knife length 430mm - number of knives 2pcs - sieve dimensions 50x50mm - Pulling shaft geared from below - 1.1kW lower shaft motor - Pulling shaft geared from above - 1.1kW upper shaft motor - vibroryn - vibroline length 4160mm - vibroline width 370mm - main motor 45kW - autorever (adjustable) - reverse gear - overall dimensions of the machine l/w/h 2150x1450x1050mm - Overall dimensions of the vibroline l/w/h 4160x650x880mm - weight about 2500kg ADVANTAGES – German production – autorever (adjustable) – protects the machine from blockage and damage in case of overload – reverse gear – DTR documentation – used chipper, very good condition Net price: 73900 PLN Net price: 17595 EUR depending on the price 4.20 EUR (Prices may cha ...

Part number 7975 SPECIFICATIONS - Inlet width 450mm - Inlet height 250mm - shaft width 530mm - knife length 530mm - number of knives 2pcs - sieve dimensions 50x50mm - 2 gear pulling shafts from the bottom - lower shaft motor about 2.2kW - Pulling shaft geared from above - upper shaft motor about 2.2kW - conveyor belt - Conveyor belt length 6500mm - conveyor belt width 400mm - main motor 37kW - 0.37kW conveyor motor - autorever (adjustable) - overall dimensions of the machine l/w/h 2400x1300x1100mm - overall dimensions of the conveyor belt length/width/height 6600x610x550mm - weight about 2500kg – German production – autorever (adjustable) – protects the machine from blockage and damage in case of overload – with a 6500mm conveyor belt – used chipper, very good condition Net price: 115900 PLN Net price: 27595 EUR depending on the price 4.20 EUR  ...

Part number 7974 SPECIFICATIONS - inlet of the widened loading hopper 1500x1730mm - outlet for shredded wood fi 200mm - rotor working width 990mm - main motor 22kW - 0.75kW pump motor - number of knives 54pcs - knife size 40x40mm - 20mm sieve - pressure drawer - electric autoreverse - dimensions l/w/h 2500x2200x2350mm - weight about 2000kg ADVANTAGES – German production - pulse pusher - Pusher to half - Fast/forward pusher – automatic speed adjustment of the pressure drawer – original DTR + CE documentation year 2018 – pressure drawer – viper – screw conveyor, responsible for transporting wood chips – autorever – used chipper, very good condition Net price: 115900 PLN Net price: 27595 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Edge banding machine Type: KAM6ALL+ Manufacturer: Holzmann Year: 2023 Min. workpiece length: 100 mm Min. workpiece width: 100 mm Min. workpiece thickness: 8 mm Max. workpiece thickness: 42 mm Edge thickness: 0.4 - 3.0 mm Air pressure: 6-8 bar Machine weight: 1260 kg In very good condition, fully functional, under power Find more here - / Contact us at -

Panel saw Tyoe: FKS400V32PRO Manufacturer: Holzmann Year: 2023 Table height: 890 mm Formatting table: 3200x435 mm Boom: 1200x550 mm Suction: 1x Ø 100 / 1x Ø 80 mm Max. width of cut with longitudinal ruler 1300 mm Main saw blade (/hole): 250-400 (/30) RPM of saw blade: (I):3000 (I):4000 (III):5000 rpm Diameter of pre-cutting disc (/hole) Ø120 x 20 x 3.2-4.2/2.2 mm Power of the pre-cut motor: 750 W Pre-cut speed: 8000 rpm Turning the saw blade: 0-45° Dimensions:4760 x 5010 x 1700 mm Machine weight: 1044 kg In very good condition, fully functional, under power Find more here - / Contact us at -

complete in standard version with: - Fully automatic electronic control with Program selector switch RINSE-GLUE-GLUE/DRIVE - Dowel feeding via electronic vibratory conveyor with potentiometer for infinitely variable adjustment of the dowel conveying capacity - Automatic dowel diameter and dowel length control with Auto-DL-Selekt system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed glue system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 2,250 mPas - Stepless electronic glue quantity adjustment with potentiometer by means of time preselection by electronic control - Glue/water selector switch for rinsing/cleaning the glue system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and dirty water collection container) - Control lamp for glue r ...

Code: 0396 Brand: EINHELL Model: TC - WW 1000 Wood lathe Technical specifications: Power supply 220 Volt Centre distance 1000 mm Turning diameter 280 mm Motor power 350 W N° 4 speeds (890/1260/1760/2600 rpm) Backing pad Tailstock Overall dimensions mm 1500 x 200 x 350 h Weight kg 23

Edgebander manufactured in 2005. This IMA Advantage 600 features jointing cutters, a gluing unit for thin and thick edges, and a pressing zone. It includes two trimming units, flush trimming, and profile and surface scrapers for enhanced finishing. If you are looking to get high-quality edge banding capabilities, consider the IMA Advantage 600 machine we have for sale. Contact us for further details.

Concerns a combination of lots 6 and 7 gluing installation and glue press installation Auction-ID: A1-44305-8

Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible.

Edgebander manufactured in 2016. This BIESSE Akron 1440 A features a pre-milling unit, multifunction milling units, flat trimming, and a corner rounding unit. It also includes automatic glue application, motorized adjustment of units, and a touchscreen control for ease of use. If you are looking to get high-quality edgebanding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details.

Manufacturer: Mohringer Type of Machine : Automatic Edging Saw Upgrades and Refurbishment - 1993 -- New Mohringer centring and infeed table installed - 2019 -- Full factory overhaul carried out at Mohringer works - 2022 -- New optimisation and control system installed (SDE) Find more here - / Contact us at -

Panel saw Type: K 700 S Manufacturer: Felder Year: 2018 Machine in good condition, fully functional, under power Find more here - / Contact us at -

Auction-ID: A1-46915-299

tube diameter: 300 mmlength: 1.170 mmwidth: 380 mmheight: 820 mmAs good as new block separator or block trap for sorting out wooden blocks in extraction systems.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clean air extraction ALKO Power Unit 200P -used air filtration by means of filter bags, cleaning pneumatic, dust-tested, mobile collection container---------- Technical data ----------extraction nozzle: 200 mm, nominal volume flow: 2,261 m³/h, max. vacuum: 2,174 Pa, number of bags: 2 pieces, motor: 3 kW, compressed air connection: 6 bar, dimensions (LxWxH): 2,300 x 850 x 2,050 mm, weight: 470 kg

workpiece length: 55- 170 mmwork piece width: max. 28 mmworkpiece height: max. 27,5 mmmilling motor: 2 cut-off saw: 1 Special machine APK automatic sawing and milling machine for cutting wooden blocks to length and then milling them. Special design for the production of cutlery tray inserts (see pictures) or similar workpieces.Work sequence:1. feeding the material from the magazine2. cutting (sawing) to the desired length3. milling of the cut workpieces4. ejection of the finished part.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Radial fan, dust extraction fan, fan, extraction, dust blower -Manufacturer: Ferrari, Radial fan in soundproof container -Container manufacturer: Wagner Lufttechnik -Engine: Siemens, 11 kW -Speed: 1460 rpm -Pressure and volume performance: unfortunately not visible -Fan wheel: Ø 700 mm -Connection input: Ø 790 mm -Connection output: 700 x 500 mm -Quantity: 2 blowers available -Price per piece -Dimensions: 2130/2135/H2480 mm -Weight: 1325 kg

Edge banding machine Type: G 200 Manufacturer: Felder Year: 2007 Edge thickness: 0.4 – 2 mm Part thickness: 10 – 45 mm Min. part length: 250 mm Min. part width: 90 mm Feed: 5 – 5.5 m/min Moulding speed: 9000 rpm Moulding diameter: 70 mm Glue temperature: 20 – 210 °C Glue container capacity: 1.2 kg Weight: 310 kg Including suction Copy wheels from a newer model Currently after service Machine in good condition, fully functional, under power Find more here - / Contact us at -

Edge banding machine Type: G 360 Manufacturer: Felder Year: 2022 Edge thickness: 0.4 – 5 mm Part thickness: 10 – 45 mm Min. part length: 210 mm Min. part width: 70 mm Feed speed: 8 m/min Total power: 5,5 kW Weight: 450 kg Machine length: 2300 mm Equipment: pre-milling unit trimming unit lamp for preheating edged material glue melting tank removable glue tray radius cidliny flat cidliny Machine in very good condition, fully functional, under power Find more here - / Contact us at -

Hydraulic veneer cutter MONGUZZI mod. 3200 used theoretical useful cut mm. 3200 nr. 2 motors installed power HP 10 Motorized rear guide with mechanical display Cutting height REER safety barrier (new) for finger detection - security level type 4 - Machine length mm. 4400 Weight kg. 3800 overhauled machine, in excellent condition CE compliant

Double-end profiler winter Type RYD 6020 Year of construction 2010/6 Working width approx. 2000 mm Working height approx. 10 – 120 mm Feed speed approx. 6 – 36 m/min. 1 unit per side Motor power approx. 5.5 kW each Feed motor approx. 4 kW Motor width adjustment approx. 0.75 kW Connected load 15.1 kW Weight 4000 kg

Motor 18.5KW Rotor length 600mm Hydraulic Moving Floor Machine is immediately ready for use For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively tested before sale to ensure the highest quality and reliability. The satisfaction of our customers is our top priority. You are welcome to visit and test the machines in advance so that you can personally convince yourself of their flawless function and quality. In addition, delivery can be organized by us on request. For further information or questions, please do not hesitate to contact us at any time by phone or message.

Panel saw FORMAT 4 Kappa V60 -used-welded frame with extremely high rigidity, automatically evasive moving grate, stable detent of the saw carriage at the top and bottom, control panel at eye level, digital display at the longitudinal stop, digital display for horizontal cut, stiffening cutting device, lifting roller transport system, edible support, extraction device TRK, dust-tested---------- Technical data ----------cutting length: 4,300 mm, cutting height: 2,200 mm, cutting depth: 60 mm, Saw blade : 250 mm, Motor: 3 kW,