other wood working machines used for sale (1,357)

Pneumatic nailer, strip magazine nailerPASLODEGN 161 ( GN161 )for nails up to 160 mmPmax 8 barsuitable nails W125 !used !Dimensions: 540 x 520 x 140 mm

Roofing feltPASLODE3.1 x 19 mm (3.0 x 19 mm)no. 00X701519,000 pcs (2 boxes)wire magazineNew !Dimensions: 510 x 450 x 320 mm

roofing felt nailsPASLODE3.1 x 25 mm (3.0 x 25 mm)no. 00X701718,000 pcs (2 boxes)wire magazineNew !Dimensions: 460 x 500 x 300 mm

Nail Strips, Strip NailsPASLODE3.8 x 1210113121approx. 2800 pcs. (2 boxes)New !matching nailer W117 !Dimensions: 290 x 250 x 270 mm

Circular Saw Blade Sharpening Machine Vollmer Type CNS Suitable for CV circular saw blades for straight and bevel grinding Grinding wheel diameter maximum 150 mm Saw blade diameter 90 – 600 mm Sharpening speed 3 speeds 30/60/80 teeth per minute Drive warping disc motor power 0.2 kW Drive Feed 0.4 kW Dimensions 800 mm x 900 mm x H 1800 mm Weight approx. 250 kg

HOLZKRAFT FBS-740-2 F32 Bandsaw Voltage: 400 V / 50 Hz Motor Power: 5.5 kW Max Cutting Width: 710 mm Max Cutting Height: 500 mm Max Cutting Speed: 1000 m/min Weight: 880 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Pallet Production Line / SAS bracket line Three people are needed to operate the line and two people to operate the saws for cutting the supports Saw cutting can be further automated. Find more here - .ucymachines/ Contact us at - sales@ucymachines

2022 Diebels RMH Con Sort III Wet cutting table Technical data: Drive power [kW]: 2.6/32 CEE plug Separating area LxW [mm]: 1270 x 710 Lightweight discharge area [mm]: 1270 x 710 Number of water pipes [pcs]: 5 Number of water nozzles [pcs.]: 18 Water tank volume [litres]: 400 Electrical connection [V/A]: 400 / 32 CEE plug Weight [kg]: 750 Dimensions (without tank) LxWxH [mm]: 2500x1010x1120 Speed control in 3 stages via potentiometer on the control cabinet VA water tank with waste water pump Automatic water level control via Quick stop Operational hours: 100 hours. The separate water tank with filter was adapted by us to this system and would also be included in the sale if desired. This also applies to the table frame. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Complete Lacquering line - Feeding - Primer application unit - Dryer - UV plant - UV dryer - Stacking System components are all from Bürkler and Kontra Formats: 1860, 2800, 5600x2070mm Number of application units: 10 units, 3 of which are UV UV dryer: 1x 4 UV-tubes, 1x 5 UV-tubes: 1x 6 UV-tubes Output: approx. 3300m²/h Find more here - .ucymachines/ Contact us at - sales@ucymachines

Höfer Press for sale. Model: HKP 260 + HKP 40 Year: 2005 Dimensions: Dimensions of the HKP260 (for transport): L x W x H 5100 x 2300 x 3000 mm Dimensions of the HKP40 (for transport): L x W x H 3900 x 2300 x 2400 mm Dimensions of each hydraulic unit: L x W x H 1400 x 1400 x 600 mm Loading table dimensions: L x W x H 4900 x 2100 x 1100 mm Outfeed table dimensions: L x W x H 2900 x 2100 x 1100 mm Heating unit dimensions: L x W x H 1400 x 500 x 1300 mm (2x) Main control cabinet dimensions: L x W x H 2000 x 1000 x 400 mm Dimensions of entire system ready for operation: L x W x H 14600 x 2600 x 3000 mm Weight of the HKP260 press (for transport): approx. 13000 kg, all attachments removed Weight of the HKP40 baler (for transport): approx. 6300 kg, all attachments removed Weight of the hydraulics: approx. 350 kg Weight of the switch cabinet: approx. 400 kg Weight of the heaters: ...

SCM Pratix-S 12 B CNC Machine Centres With Flat Table Find more here - .ucymachines/ Contact us at - sales@ucymachines

Technical Description - Model: MARK/C 20-32.5 - Manufacturer: ITALPRESSE - Year of Manufacture: 2003 - Line Function: Designed for laminating veneer on chipboard, MDF, and plywood panels. --------------------------------------------------------------- Components of the Line Vacuum Loading Unit: - For loading thin panels from the scissor lift into the brushing machine. - Passage Width: 2000 mm. - Translation Speed: Adjustable 7–35 m/min. - Cycle per Minute: 3–5 (depending on panel size). - Suction Cups: 6. Brushing Machine: - Working Width: 2000 mm. - Max Opening Height: 100 mm. - Rollers: 2 motorized brushing rollers (180 mm diameter), 2 forwarding rollers (125 mm diameter). Glue Spreader (Brand: Osama): - 2 spreading rollers, 2 dosing rollers. - 4 motors. Automatic Press: - Model: MARK/C 20-32.5. - Platens Dimensions: 2000 × 3250 mm. - Daylight Opening: 140 mm. - Thrust: ...

2009 Elumatec SLK 118 A template-free copy milling machine type SLK 118 from elumatec from 2009, Find more here - .ucymachines/ Contact us at - sales@ucymachines

Encolleuse Bürkle RCG 700 Bürkle RCG 700 2017 Find more here - .ucymachines/

was used for Plastic products Nerling systemraeume - manufacture Find more here - .ucymachines/

Year of Manufacture : 2021 Model : TEMPORA 45.03L Type of machine : Edge banding machine Manufacturer: Format-4 Voltage: 400 V Phase: 3 PH Frequency: 50 Hz Current: 22.8 A Power: 14.5 kW Minimum Air Pressure: 7 bar Find more here - .ucymachines/ Contact us at - sales@ucymachines

1999 WEBER LC 2000 DDP-600 Working width max. 600 mm Workpiece thickness max. 150 mm automatic measurement of the workpiece thickness Feed continuously adjustable 2 - 12 m/min. Aggregate equipment: 1) Contact roller unit with smooth steel roller Drive motor 15 KW, pole-changing for 2 grinding speeds 2) Rubber contact roller assembly with corrugated rubber roller Hardness 60 Shore drive motor 15 KW, pole-changing, this one The motor also drives the subsequent sanding shoe unit 3) Sanding shoe unit pneumatically controlled Machine complete with small parts return, designed as a transport curve, as a plate conveyor transport Machine weight approx. 1,800 kg Connection values: 400 V, 50 Hz, 3 Ph. Find more here - .ucymachines/ Contact us at - sales@ucymachines

2x Wood drying chamber dry chamber energy saving system 606 economy It is run until 2018. The heating system can be purchased in addition - wood chips with 400 KW heating capacity and boiler , etc. - Same year of construction. The solar system/panels on top can also be purchased. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Peddinghaus 960 cold saw and Peddinghaus TDK 1000/3 spindle beam drilling line 18M infeed and outfeed, 5M drag system infeed and outfeed, Hard stamper system, Fagor software operator system 1 Saw and drill and measuring system, nobody would buy these unless sold as one unit 2 Feed and transfer system 3 Hard stamper Find more here - .ucymachines/ Contact us at - sales@ucymachines

Fubo 2” flooring line Plant is ready for production Key data: Attachment Fubo 2 Construction year 1999 Format finished product 193mm x 1380mm Maximum speed 6-8mm 80 parts per minute / 10/12mm 60 parts per minute Feed longitudinal machine 130m/min Feed cross machine 30 m/min Stacking areas for semi-finished products 2 Buffer spaces for semi-finished products 2 Spare plate space 1 Longitudinal saw (dividing saw) 11 motors with gearbox (2 hoggers, 9 saw blades) Longitudinal machining (Homag) 10 Motors 6-8KW Cross processing (Homag) 12 Motors 5-8KW Baumer control system (service discontinued) 2014 S/N:35983 Cardboard packaging (folding boxes only) Buffer spaces for finished pallets 6 places + 1 on VW + 1 stacking place Find more here - .ucymachines/ Contact us at - sales@ucymachines

Body lifting and alignment device Strap belt table with lifting and alignment device Fezer Vacuum Lifter Control: Mitsubishi Melsec Dimensions: 3600 x 1200 x 930 mm More items - new and used - can be found in our shop! International shipping costs on request!

I am selling a disassembled Kovos SR 4 dryer without electronics. Without thermal insulation (glass wool) 2x fans, 2x heating coils. Dimensions of the dryer: Exterior height 3.2 m x width 4.1 m x length 4.55 m, interior height 2.1 m x width 3.8 m x length 4.1 m. The dryer is complete, it is possible to visit it partially built. Described parts for assembly. Material aluminum, very good condition. It was stored in the hall for 15 years.

Width rotor 1,300 mm Rotor diameter 370 mm Number of shafts 1 Main motor 22 kW Gate valve hydraulic Single blade interchangeable Loading from above Crushing tool Reversible knife

0: mm0: 2800 m³/h0: 5000 paFilter capacity: 14 m²Motor output: 5,5 kW0: 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1100x1000 mm: 900 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length: mmWorking width: mmWorking height: mmSchmalz VacuMaster Multi vacuum device 00 / 150-90 ° -1 Pos. 1 - Article 12.01.02.10520------------------------------------------with chain and Slewing CraneFor handling porous large-sized workpieces.VM-MULTI-400/150 H / 90-1EG1000x675Load 400/150 kgDesign: horizontal pivot 90 °Height: 540 mmControl Arm Length: 1025 mmEye diameter: 5 mmSauggreiferanzahl: 1Suction width: 675 mmSuction length: 1000 mmMotor power: 1.5 KWVoltage (50 Hz): 230 / 400V AC3Voltage (60 Hz): 230/460 V-DrehstomColour: RAL 7035 light grayVacuum Lifting Device VacuMaster Multi-------------------------------------------------- -Type VcuMaster Multi 400 / 150-90 ° -1for the transport of plates with a porousbut also with a dense surface such asraw and laminated chipboardraw and laminated MDF / OSB board,Plastic, plasterboard ..consisting of:Spur gear motor with b ...

5-fold combined joinery machine Connected load 380V 3 x 3kW, weight approx. 550 kg, external dimensions 2700 x 1500 x 850 mm, slewing ring, dressing thickness, planing width 300 mm with three-knife shaft, dimensions tables 310 x 1500 mm, passage height 230 mm, circular saw 0-45° swivel, max. cutting height 100 mm, saw table dimensions 350 x 950 mm travel 1200 mm, saw blade diameter. max. 300 mm, tiller with two speeds 3100 / 6200 rpm, milling mandrel 30 mm, height adjustment max. 110 mm, slotted hole drilling device speed 4500 rpm, table size 180 x 470 mm, two-jaw chuck 0-165 mm, suction nozzle 3x100 mm

Pallet line, pallet production, Euro pallets Complete production line for Euro pallets From round timber to finished pallets Debarking Band saw Multi-rip saw Cutting saw Length sorting system Stacking system Conveyors Nail Machines (Böhm & Kruse) and so on.

Mobile cultivator Starchl MK50 FEEDER 450/450 engine diesel 190hp Hours 300

Hacker Lindner T 650/220-2 with Virborinnen with scraper conveyor with metal detector 55kw...