other wood working machines used for sale (1,357)

SCM C26 genius 4-fold combination machine Planing width 260 Planing shaft: 3-tersa knife shaft Dressing table length: 1040mm Passage height: 3-200mm Format sliding table: 1070mm trimming length Cutting height: 80mm Saw can be swivelled 90°-45° Rigid milling machine 90° Milling machine rpm: speeds of 4200-6300 rpm or 5000-7500 rpm Engine power: 400V 2 hp S1 260mm planing width! G&STÜ-5500027 Fits in any small workshop!

SCM lab 300p 5-speed station wagon Universal multiple combination Aluminium sliding carriage 3 Tesa planer blade shaft Trimming length 1600mm max. saw blade diameter 315mm with scorer swivelling saw blade Dressing width 300mm Dressing table length 1300mm Thickness table dimensions 300 x 450mm Min./Max. Thickness Height: 3/220mm Motor 50Hz 4kW 400V max. milling tool diameter 160mm Spindle speed: 3600/7500/10,000 rpm Spindle diameter: 30mm Weight 430kg G&STÜ-5500314

0: 300 mm0: max./nom: 6.000/5.085 m³/h0: v.V./nom: 2.950/2.400 Pa paFilter capacity: 36,2 m² m²weight: ca. 1.300 kgDimensions (L/W/H): 3.880 x 1.020 x 2.250 mmDust extractor NE-J 300 3 ton. m. Jet filter regeneration--------------------------------------------------Includin g a new type of extinguishing device with a drop flap and oxygen extraction,5 m cable for junction box, high-efficiency reluctance motor IE5, FU control,Wired 7 color touch panel, automatic start/stop start controland monitoring of up to 10 woodworking machines includedautomatic slide control, integrated emergency stop function and isof course H3 tested.The newly designed model fits into any standard shipping container. The suction nozzlewith injection box and non-return flap is located in the middle of the frontdust extractor. The highly efficient JET filter regeneration guarantees highFilter service life, low fil ...

Part Number: 7361 SPECIFICATIONS - inlet width 400mm - inlet height 180mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2pcs - sieve dimensions 60x60mm - 2 toothed pulling shafts from below - lower shaft motor 1.8kW - 2 toothed pull shafts from above - upper shaft motor 1.8kW - belt feeder - length of the feeding belt 2200mm - width of the feeding belt 330mm - main motor 22kW - autorewers - reverse gear - total dimensions length/width/height 4100x1350x1100mm - weight 1800kg ADVANTAGES – made in Germany – autorewers – reverse gear – used chipper, very good condition Net Price: 66900 PLN Net price: 15580 EUR calculated according to the price of 4,30 euros (With higher fluctuations the price may change)

Remote Mayrhofer SPW-F quick-release car

Wood chipping machine Low-noise low-speed machine with press drawer WL12/30 Hopper dimensions 1200x1200 Diameter of shaft 368mm 58 cutting blades in two rows 15/20mm Strainer Main motor 30kW Weight approx. 3200kg

Code: 0352 Brand: OMW VALENTINI Model: 700 Pit clamp for chairs, for assembling classic, modern, style chairs etc. Technical data: Assembled steel frame Useful pit mm 700 x 700 N° 4 cylinders with adjustable stroke that can be moved on the plane Counterweight Foot pedal for simultaneous operation of the 4 cylinders Compressed air 7-8 atm Overall dimensions mm 1300 x 920 x 750 h Weight kg 700

Wooden flooring line consisting of: Motorized loading roller conveyor Suction cup loader Sliding table saw/panel saw Multi-blade panel saw Tipper Dry or glue-fitted slats Stackers Packaging machines Parcel loader Packaging Automatic pallet unloading strapping machine Camera-guided movements The loading roller conveyor, the stack (max 50 sheets, thickness 8mm) is transported under the suction cup loader, where the panels are picked up and placed on the hopper of the panel saw. Model:TSA 360A The sectioned sheets go on a 90° sideshift and are conveyed by belts over a suction cup feeder. Here, by means of a camera, by means of the black line, they are centered and introduced into the Paul K34G multi-blade panel saw/multi-blade Paul The sectioned slats (n°10 size 130 size 1300x2x20202) go on a 90° sideshift that transports them to an octagonal tilte ...

Rudnick&Enners Drum Chipper Type: RE-TH 250/650/5 Main motor: 75 kW Inlet width: 700 mm Inlet height 300 mm Feed rollers: 3 bottom, 2 top with control cabinet and metal detector

0: 160 mm0: max./nom.: 1.780/1.447 m³/h0: v.V./nom.: 3.160/2.450 paFilter capacity: 12,3 m²weight: 430 kgDimensions (L/W/H): 1.970 x 910 x 2.070 mmDust extractor NE 160, J pneum. Filter regeneration------------------------------------------------For the extraction and filtering of wood dust and wood chips.GS and H3 testing according to GS-HO-07 (BGHM), vacuum filterwith 2 swivel and 2 fixed castors including suction nozzle, with pneumaticCleaning, 5 m cable with plug and reversing switch, fan includedIntegrated electric motor IE3 400V / 50Hz, with mobile bin and chipcollection bag.Standard is intake manifold on the right / fan on the left. Suitable forstandard Sea containers.Technical data / manufacturer description------------------------------------------------• Volume flow max./nom.: 1,780 / 1,447 m³/h• Operating volume flow: 2,300 m³/h• Negative pressure v.V./nom.: 3,160 /  ...

chuck for 25 mm shafts total height 170 mm

Harvester, wood harvester, forest harvester, crane harvester used Manufacturer: FMG Type: 1870 SUPER MASTER Year: 1998 Operating hours approx. 7500 Engine: Volvo Diesel 220 hp Boom: Logolift 200 V 9 m Head: TIMBERJACK 762B Machine drives but we can't test all functions. Repairs to the cutting head may be necessary. Control would have to be reviewed. Dimensions approx. 11 x 3 x 3.7 m

Driven heavy roller conveyor for a gang saw, band saw Machine dimensions: total length 8300 mm, width 1800 mm, roller width 1600 mm, height roller of floor 580 mm, Roller Number 11 pieces Gear motor Power 2 kW/1400 rpm Total weight 2000 kg. As good as new

Dimensions and weights Length approx. 2200 mm Width/depth approx. 1330 mm Height approx. 1300 mm Weight approx. 362 kg Dressing Dressing table width 260 mm Dressing table length 1120 mm Chip removal max. 4 mm Suction connection Extraction nozzle diameter milling machine 100 mm Suction nozzle diameter saw blade guard 30 mm Suction nozzle diameter thickness 100 mm Thickness Table length 545 mm Table width 258 mm Working height min. 5 mm Working height max. 225 mm Chip removal max. 4 mm Electrical Data Saw input power 2.2 kW Input power planer 2.2 kW Input power table milling machine 1.5 kW Connection voltage 230 V Mains frequency 50 Hz Milling spindle Mandrel diameter 30 mm Effective length 105 mm Height adjustment 110 mm Speed(s) 1400/4000/6000/9000 rpm(s) Milling tool diameter max. non-lowerable 160 mm Noise emission Sound pressure level no-load 80 dB(A)  ...

Filter separator for wood chips, wood dust, etc. on a chip hopper, chip silo. 104 filter bags with a total filter area of 222 m2. Explosion protection with Brilux explosion dampers Height 4400 mm, width 3050 mm, depth 2600 mm. Vibration cleaning of the filter bags.

Length Sorting Plant Sawn Timber Sorting Plant MAYRHOFER 5-Boxes Total length: approx. 22 meters Current: 1. Box: 1 meter 2nd box: 1.5 meters 3. Box: 2 meters 4. Box: 2.5 meters 5. Box: 3 meters good condition - fully functional - can still be viewed during operation Location: Austria, near Graz

Weibert W7-32 5-fold combi machine with new sliding table ! it should be a woman! Planer width : 320mm Motor power: 3 motors 400V 3 KW Dressing table length: 1500mm Planer shaft: 3-reversible knife shaft Passage from 4-230mm Format sliding table 2300mm new profile & length Cutting height: 103mm Saw blade 315mm Swivel 90°-45° Milling machine: rigid 90° Milling RPM: 1400/3500/6000 and 8000 rpm G&W-W7-32

0: 250 mm0: 3530 m³/h0: 2500 paDimensions (L/W/H): 3.350x1.020x2.290 mmengine output: 5,5 kWturning speeds: 2800 U/mincompressed air: Pmax 8,0 barweight: 1100 kgNestro dust extractor NE 250 WFor sale on behalf of the customer ex location--------------------------Manufacturer description:Dust extractor with pneumatic shakingand automatic water extinguishing systemIncluding suction nozzle d=300 mm, 5 m cablewith plug and reversing switch, electric motor 5.5 kW400V/50 Hz, on/off switch, potential-freeContact for machine monitoring, motor protection switch,Pressure difference display, 3 mobile dust binsClamp bracket, 3 chip collection bags (PE) 600x600 mm,i=1100mmHousing made of galvanized sheet steelTechnical data:Nominal volume flow 3,530 m3/hassociated negative pressure 2,500 PaSuction side connection d=250 mmContinuous operation modeType of current: three-phasePower consumption 5.5 kW/1 ...

Holtrop Jansma-AFS clean air extraction with compressed air cleaning, auger discharge, rotary lock, chip fan, return air with summer/winter gate valve and fire protection device Type: OSFS 185 Year of construction: 2005 (2015 new turnstile and new control system) Clean air extraction Suction supports: ø700 mm + ø700 mm Length: 3,500 mm Width: 2,300 mm Height: 6,200 mm (onderbak 2,700 mm + bovenbak 2,700 mm + 800 mm fans) Capacity: 21,000 m3 /hour Chip fans: 2 15 kW, 380V, 56 Amp, 10,500 m3/uur, 3,000 tpm, 3,850 Pa, Type: RL E 550130 Filter surface: 185 m2 Filter tubes: 150 stuks Length of filter tubes: 2,200 mm Diameter of filter tubes: 180 mm Cleaning: Compressed air cleaning Flame protection: Sprinkler installation with fire brigade connection Screw: HJ STH-380 12 tpm Turnlock: HJ ZRS-300, 31 tpm Hopper dimensions: 250350 mm Transport fan: Connection diamet ...

Holtrop Jansma Extraction with Kontainer Chip Disposal Type: MSK350S Year of construction: 1998 Type: overpressure filter system Intake manifolds: ø350 mm Capacity: 8,000 m3/hour Year of construction: 1998 Filter surface: 46 m2 Fan: ETD 350, 7.5 KW/1.500 tpm Star wheel chip disposal: 800 mm - Pressureless Chip disposal fan: EMD-200, 4 KW-300tpm, 45m3/uur Explosion Pressure Release: Doors serve as a pressure release in the event of an explosion Pressure Measurement: Pressure Dial Gauge Cleaning: 0.13 KW/1500 KW vibrating motor Air recovery: 500500 mm with built-in flame protection damper Dimensions: 3,3503,0001,200 mm Scope of delivery: filter system with intake fan Fan, transport fan, control cabinet, air recovery with built-in flame protection flap

Key data: 250 mm, 4 kW, 4060 m³/h

arke: Holtrop Jansma Clean Air Extraction Type: MSO 250 Year of construction: 2016 M-No.: W0056730S Clean air extraction: MSO 250 with flame protection device Intake support: ø250 mm Length: 2,250 mm Width: 1,230 mm Height: 2,840 mm Weight: 600 kg Capacity: 4,060 m3 /hour Pressure: 1,900 Pa Power supply: 4.0 kW, 380V, 9 Amp Filter surface: 27 m2 Filter bags: 30 pcs. Length of filter tubes: 1,450 mm Filter tube diameter: 200 mm Cleaning: included Noise: dB(A) Flame protection system: automatic fire extinguisher with powder extinguishing agent, automatic slider in the return air duct, automatic electrical shutdown of the extraction (New powder fire extinguisher witrd assembled before delivery) Scope of delivery: filter system, with built-in intake fan, control cabinet, automatic fire extinguishing installation with flame protection damper

Length stop with roller conveyor Length: 3 meters Handwheel adjustment Measuring tape with magnifying glass

I am selling a Combined Machine Sliding Table Saw with Scoring + Milling Machine Manufacturer: FELDER Austria Model: KF700S. Built in 2011. Cutting length 3200mm. Saw blade and milling swivel 0-45° manual Saw blade and milling digital height adjustment Digital display of rip fence and working heights Insertion of the main saw blade and scoring machine from the aluminium format table. Main motor sliding table saw 3.0 KW / (3200/4500/5800 rpm adjustable) Scoring motor sliding table saw 0.75 KW Main motor milling machine 5.5 kW Tools, options, and accessories on the pictures included in the price. Very good condition. Available soon. Incl. full documentation and CE certificate.

Brand-New, Still Packed, Pellet Mill, capacity 5 tons equipped with 6 heads

SECOND-HAND OLEO PNEUMATIC LATHE FOR TURNING AND SANDING OF SMALL WOODEN ELEMENTS LOCATELLI MOD. OMK 300 - control panel - automatic loader - Maximum working length 300 mm - min / max working diameter 8/80 mm - working stations: automatic loader turning with n. 2 gouges (roughing + finishing) 1° shaped knife 2° shaped knife unloading

HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour

SECOND-HAND VERTICAL HYDRAULIC CLAMP FOR WOOD PANELS STROMAB MOD. SL1 - CE RULES - volt. 400/50 - year 2009 - 3000x1300mm

SECOND-HAND 4+1 SPINDLES MOULDER STETON MOD. FAST 5S - CE RULES Spindle configuration: bottom 3kw right 3kw left 3kw top 4kw universal 3kw - working width mm 230 - planing height mm 120 - volt. 380/50 - s/n 25 906/00 - year 1998

SECOND-HAND ORBITAL SANDER COMEC LC/20/AV - CE RULES - min/max diam. 10/160mm - with feeding units - volt. 400/80 - sn 010118 - year 2001

SECOND-HAND VERTICAL SANDER