other wood working machines used for sale (1,357)

SECOND-HAND VERTICAL SANDER WITH 2 BELTS OMA MOD. UNICA - transversal sanding on two sides of straight or shaped / curved elements - n. 2 motors for abrasive belts 7.5 hp each - n. 2 abrasive belts 3700x90 mm - Automatic feeding 4-20 m / min - minimum working length 320 mm - Max. piece height 130 mm - CE year 2001

SECOND-HAND WIDE BELT SANDING MACHINE DMC MOD. TECHNOSAND TC 1100M3 DA MM. 1100 - CE RULES - rubber roller - 18.5 kw - 90 sh - diam. 250 mm - rubber roller - 15.0 kw - 70 sh - diam. 250 mm. - rubber roller - 11.1 kw - 40 sh - diam. 330 mm - n. 3 indipendent motors - working width 1100 mm - device for short pieces - year 2005

SECOND-HAND DRYING KILN COPCAL - traditional heating system - capacity 70/80 mc - dimensionst mt 9,5x6x5+1H

Tersa Knife Shaft Motor 3x 3HP, 400V, 50Hz Saw blade diameter 250mm Cutting height 85mm to 90° Cutting height 55mm to 45° Mandrel 3000/6000 rpm Sliding table 1450 x 320mm Cutting length 1200mm Mitre fence Eccentric clamps Weight 485kg G&RO-HX260-CE

Key data: 250 mm, 5 kW, 4700 m³/h

Spänex dust extractor SMU 4500.11 Suction nozzle 250 mm Cleaning vibrating motor Nominal flow rate 4700 m³/h Minimum flow rate 3530 m³/h Motor 5.5 kW Filter renewed

Hub25T Pallet truck Lifting capacity 2500kg Fork height 85- 200mm Fork dimensions 550 x 1150mm Weight 60kg G&HM-HUB25T

CATALOG NO. 7191 TECHNICAL DATA - loading hopper inlet 870x735mm - rotor working width 720mm - main engine 18.5kW - pump motor approximately 0.75kW - number of knives 17 pcs - knife dimensions 80x40mm - 20mm sieve - pressure drawer - electric autoreverse - outlet for chipped wood, diameter 250 mm - dimensions length/width/height 2000x1350x1370mm - weight 1586kg ADVANTAGES – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 38900 PLN Net price: 8644 EUR depending on the price 4.50 EUR Net price: 10237 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Planers and Moulder ...

CATALOG NO. 7069 TECHNICAL DATA - inlet width 400mm - inlet height 150mm - shaft width 450mm - shaft diameter 550mm - number of knives 2 pcs - 3 toothed shafts pulling from the top and bottom, 2×2.2kW - electric autoreverse - reverse gear - belt feeder - feeder length 5100mm - feed belt width 400mm - main engine 30kW - chipper dimensions length/width/height 2600x1500x1530mm - total dimensions of the feeder length/width/height 5200x560x910mm - weight approximately 3000 kg – with belt feeder – electric autoreverse - reverse gear – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 84900 PLN Net price: 18867 EUR depending on the price 4.50 EUR Net price: 22342 USD depending on the price o ...

CATALOG NO. 7240 TECHNICAL DATA - inlet width 400mm - inlet height 210mm - shaft width 530mm - shaft diameter 500mm - knife length 530mm - number of knives 2 pcs - sieve dimensions 55x50mm - 2 geared rollers pulling from the bottom - lower shaft motor approximately 3kW - toothed shaft pulling from above - upper shaft motor 1.5kW - length of the feed belt 4600mm - feed belt width 400mm - main engine 55kW - autoreverse - feeder dimensions length/width/height 4630x620x760mm - machine dimensions length/width/height 2510x1700x1200mm - weight approximately 3500 kg – German production – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 85,900 PLN Net price: 19089 EUR depending on the price 4. ...

CATALOG NO. 7166 TECHNICAL DATA - loading hopper inlet 810x630mm - rotor working width 620mm - main engine 18.5kW - pump motor 0.75kW - number of knives 30 pcs - knife dimensions 30x30mm - 41mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1800x1170x2000mm - weight approximately 1500 kg ADVANTAGES – German production – like WEIMA WL4 – pressure drawer – autoreverse – unpainted – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 47900 PLN Net price: 10644 EUR depending on the price 4.50 EUR Net price: 12605 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer ...

CATALOG NO. 7176 TECHNICAL DATA - loading hopper inlet 1050x600mm - outlet for chipped wood, diameter 160 mm - rotor working width 590mm - main engine 18.5kW - pump motor 0.75kW - number of knives 14 pcs - knife dimensions 30x30mm - 10x12mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1900x1200x1530mm - weight 990 kg ADVANTAGES – autoreverse – German production – unpainted – like WEIMA WL4 – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 48900 PLN Net price: 10867 EUR depending on the price 4.50 EUR Net price: 12868 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulde ...

Auxiliary vehicle, type KW1VEK Bearing No.: akw885 Make: Möhringer Year of construction: 1997 Part number: 126 422 00 Specifications: Gauge: 980 (mm) Support height: 420 (mm) - Reinforced design - Circumferential chain - Driven by worm gear motor with built-in slipper clutch - Tilting stool - Adjustable trunk holder - Cables and cable balancing

Steering cabin for gate, suspended movable Stock No.: aso879 Make: Möhringer Year of construction: 1994 Machine number: M9401 Dimensions: Width: 2.80 (m) Depth: 1.70 (m) Height 1.90 (m)

Clamping carriage SWVH1K - Used, factory refurbished Bearing No.: asw875 Make: Möhringer Year of construction: 1994 Machine number: 9401 Part Number: 96900008 Specifications: Gauge: 980 (mm) Support height: 430 (mm) Clamp opening: 800 (mm) Plier rotation: 360° hydraulic Travel drive: hydraulic Travel speed: forward and backward 100 (m/min.) Drive power: 4 (kW) Overall length: 3,200 (mm) Weight approx.: 1,350 (mm) Type of control: remote controlled

Specifications: Width: 500 mm Length approx.: 5300 mm Make: Unknown Year of construction: 1977

Pos.1 Buffer conveyor belts for layer formation for 4 frieze lengths Pos.2 Gantry stacking system Pos.3 Parcel roller conveyors in the area of gantry systems Pos.4 Security technology Pos.5 Machine control Pos.6 Intermediate strip automatic The mechanization is designed for the following workpiece dimensions: Length: 320 - 1000 mm Width: 56 - 120 mm Thickness: 20 - 40 mm Stack Dimensions: Length: 400 - 1000 mm (double lengths up to 2 x 520mm) Width up to: 1200 mm Height up to: 1200 mm Stacking is carried out on Euro pallets Max. output: max 40 parts/min or max 4 layers/min (board or batten layer!) Pos.1 Buffer conveyor belts for layer formation for 4 frieze lengths Quantity: 4 pieces Length: 2600 mm each Usable width: 800 mm each Propulsion: Spur gear motor Conveying speed: 15 m/min Incl. side guide rulers and layer alignment (One layer is formed,  ...

Specifications: Wheelbase: 1.3 m Number of strands: 4 strands Propulsion: 2.0 KW

Gebr. roller conveyor with built-in QFA Bearing No.: ame893 Make: Möhringer Year of construction: 2021 Machine number: ROGA M2103 QFA M2105 Drawing number: ROGA 24200623 QFA 14800267 Specifications Roll width: 800 (mm) Length: 3.5 m Roll diameter: 168 (mm) Roller spacing: 800 (mm) Cut-outs: 4 (pcs.) with built-in pull-off cross conveyor Wheelbase: 1.16 (m) Number of strands: 4 strands Propulsion: 2.2 (kW)

Gebr. Roller conveyor Bearing No.: ame894 Make: Möhringer Year of construction: 2021 Machine number: M2102 Drawing number: 24200622 Specifications Roll width: 800 (mm) Length: 4.07 m Roll diameter: 168 (mm) Roller spacing: 800 (mm) Propulsion: 2.2 (kW)

Specifications: Wheelbase: 1.0 m Number of strands: 5 strands Propulsion: 2.2 KW

Gebr. roller conveyor with built-in QFA Bearing No.: ame896 Make: Möhringer Year of construction: 2021 Machine number: ROGA M2101 QFA M2103 Drawing number: ROGA 24200621 QFA 14800266 Specifications Roll width: 1200 (mm) Length: 4,705 m Roll diameter: 168 (mm) Roller spacing: 800 (mm) Propulsion: 4.0 (kW) Cut-outs: 4 (pcs.) with built-in pull-off cross conveyor heavy Wheelbase: 1.56 (m) Number of strands: 4 strands Propulsion: 2.2 (kW)

Cross conveyor (QFM) for logs and models Distance between axles : 5.0 m Number of strands: 3 pieces Drive power : 7.5kW - Transport by means of heavy link chains and steel sprockets - Steel bearing housing - Driven by a special geared motor - Swivel wheels can be clamped separately - Wear rails on chain carriers - Substructure: Sectional steel construction -uphill - with hipped roof drivers Year of construction 1979 Revision year 2014

Lifting cross conveyor ame900 is installed in this roller table ame899 Length: 8m, 1600mm width, 4 kw motor drive - with ball-bearing rollers, mounted on Shape - Driven by a special geared motor - Position roller chain - Spring-actuated length compensation Furnishings - With 2 liftable support rollers to hold the cant - Fixed baffle wall

Installed in roller table ame899 Distance between axles : 1.96 m Number of strands : 4 pieces Drive power : 2.2 kW - Can be integrated into driven roller conveyor - Transport of the cut material by link chain chain and screwed-on drivers - Driven by geared motor - Chain carrier made of profiled steel Year of construction 1979 Revision year 2014

Weibert DB 460XL Vario Lathe Diameter max. 305mm Center Size x Height: 460 x 155mm Spindle head thread M33 x 3.5 MK2 3 speeds: 650-1430, 1240-2790, 1600-3800 rpm Electronically variable Rotating grain tip Four-pronged driver Swivel steel support 150mm, 300mm Clamping washer 145mm Quill adjustment: 55mm Motor 550W 230V 50Hz Dimensions (LxWxH): 900 x 340 x 410mm Net weight approx. 38kg G&STÜ-5920462

Weibert FR3 Sliding table saw milling machine NEW MACHINE Motor: 400V 4kW 2 motors Format sliding table: 2300mm Cutting height: 103mm Swivel saw blade, max. 315mm Milling machine rigid 90° Milling machine 1500/3500/6000/8000 rpm complete with boom WJ-400100

Reducer for root inflows bajler zembrod

Trolley bajler zembrod OBX 3 Crane width 3m

Vollmer electric line saw sharpener

Gebr. Slotted cutter for tenon cutters Carpentry joinery machine such as KRÜSI ZA-66 or REX ZA 800 SATURN 5.109 Tool diameter: 450 Tool height: 31-60 mm Aluminum From location. No shipping!