sheet metal working used for sale (3,349)

Manufacturer: Weinbrenner Type: TSV 6 / 3050 Year of constr.: End of 2015 demonstration machine Cutting length: 3050 mm Cutting capacity: 6 mm (steel) Hours of operation: 54 Control: Cybelec DNC 60 Dimensions L/W/H: 4100/2050/2100 mm Table height: 1000 mm Weight: 8500 kg Min. cutting angle: 1° Cutting angle max.: 2.5 ° Stroke rate minimum: 20 min. Max speed: 25 min. Cutting gap adjustment: motorized Cutting angle adjustment: hydraulic Number of holders: 14 Rear velocity range: 1000 mm Security: setting the photocell safety on the front and back Oil filling: 225 l Electrical power: 15 KW Power consumption: 3 x 400 V / 50 Hz Back-up fuse: 50 A Additional equipment: Extension of the side stop on 2050 mm Side stop side swing-away A total of 8 support arms freely movable along the entire length of the table The machine is a demonstration machine in mint cond ...

Alternative, new box bellows for Trumpf L3030 Siemens -from German production (it is not an original by Trump) -Y-axis (C) -Mapping: Trump ID: 1667805 / 939016 -New part

Trumpf cutting head 3.75 inch Trump ID: 911218 / 1261653 -used cutting head, technically and visually in very good condition suitable for Trumpf L3030/3050/3530/4030/4050/6030/6050

Hydraulic press brake, used Hydraulical press brake, used type / model: D 160-25 Make / make: GWF Year / year of make: 1993 Pressure / force: 160 t Bending length / working length: 3,050 mm Stand width approx. / distance b/n standards: 2.550 mm Table width: 220 mm Stand RADIUS / depth of Cap: 280 mm height / shut height: 440 mm working stroke ca / stroke. Max 250 mm Hubgeschw. / speed of stroke: down: down; 90 mm / s Press down 11 mm / s Expensed. / upward: 90 mm / s Machine weight / weight: approx. 13 t Power consumption / connected load: 22 kW Spec/specif.: 2-hand/foot control / 2 foot switch - manual

Roll forming system with 2 stations + prepare station for U-profile

Fiber laser machine HLF Power: 4kW Sheet size: 3000 x 1500 mm Changing table Siemens touch screen controller with LAN/USB Siemens drives Precitec auto focus Pro cutter cutting head IPG resonator with 4kW is included: Warranty CAD CAM software Commissioning DTL delivery Training offered

2 Coilhaken 1 x 9 t 1 x 1 t

Working width: 3000 mm sheet thickness: 15 mm sheet thickness in bending: 10 mm top rollers Ã?: 320 mm bottom rollers diameter: 310 mm speed: approx. 5.5 m / min. Connection: 380V kW weight: 17000 kg space requirement: 5450 x 2100 x 2450 mm

Control system: TRUMPF Power on: 35071 h Cutting time: 14638 h Laser power: 3 kW Table dimensions: 3000 x 1500 mm Travel distances: X: 3000 mm Y: 1500 mm Z: 115 mm Max. Thickness of material Mild steel: 20 mm Stainless steel: 12 mm Aluminum: 8 mm Machine dimensions: 9300 x 4600 x 2200 mm Machine weight: 12000 kg

MAZAK laser cutting system STX510 MKII 2, 5kW very well preserved, fully reconditioned MAZAK laser machines with 2500W Panel sizes: 3000 mm x 1500 mm minimal footprint by 2, 9 m x 7, 3 m Small part conveyor Ball roller table completely encapsulated engine cover casting bed, no foundation necessary FE: up to 20mm VA: up to 10mm ALMG: up to 8mm Plastic can including CAD / CAM software 2018 version including warranty incl. commissioning + training To test power ready to delivery ready to use = optional with automatic loading and unloading MAZAK CELL =.

Maximum cutting length: 4000 mm Maximum sheet thickness: 4 mm steel Driven back gauge to 1000 mm Page fence and table extensions Cutting length limit Cutting edge lighting Protection fence, roll with safety switches Weight: 8500 kg

MAZAK laser cutting system NTX510 1, 5kW Year of construction: 2000 very well preserved, fully reconditioned MAZAK laser machines with 1500W Panel sizes: 3000 mm x 1500 mm minimal footprint by 2, 9 m x 7 m Small part conveyor completely encapsulated engine cover FE: up to 12 mm VA: up to 6mm Plastic can incl. software including warranty incl. extraction system incl. commissioning + training = optional with automatic loading and unloading.

Laser cutting machine MAZAK Year of manufacture: 1999 Laser power 1,5 KW CNC MAZATROL Working range: 2500 x 1250 x 100 mm Max sheet dimensions: 2500 x 1250 x 12 mm Cooling system Extraction system Transformer Pneumatic sheet metal clamp Ball support for easier positioning of the plate Technical documentation available

Maximum punching force: 650 kN More performance data see nameplate or on request Inclusive range of punches and matrices

120 ton x 4100mm (3700mm between frames) MODEVA 10 CNC Complete with STARMATIC ROBOT AUTOMATION TOOLING PACKAGE SOFETWARE PACKAGE

Bandwidth of 50-500 mm Band thickness 0.8 3.6 mm Belt speed 5-40 m / min Feed rollers 2 PCs Richwalzen (80 mm) - 11 PCs Working direction optional

Band width - 280 mm Thickness 3 mm Setting rollers suit 5-reel 2, all diameter 60 mm Control actuator, band storage adjustable from 0, 5 s â 15 s video available Dimensions 80 x 60 x 140 cm more info on request

hydraulic concrete steel Benders Krupp Futura B 703 steel bending machine with accessories and complete instructions Tech. Data performance table - steel 50-55 kp/mm2 Diameter 22 mm - 6 bars per bending, 28 mm-4, 32 mm 3,. Mtfgtw 50 mm 2 speed 4-12 / min Operation - with control or manual, operating dial - HAND - machine with possibility of 3 bending angle set - every page - 3 links + 3 right complete documentation, operating instructions much accessories more info upon request You can edit, flat, round steel accessories - various bending rollers, bolts, reducing roll, Overarm and the machine has device for Pipes. Bulk 2.3 x 1 x 1 m, Btto 1500 kg

Federal load - 1500 kg Federal width - 500 mm Outer diameter - Max 1250 mm Spreader range without attachment segments 310-460 mm, 410-560 mm High of lateral ditches. Strip lines approx. 470 mm Bc9eg37hb2 Speed of the reel shaft - 16 U / min, power 0,55 kW Manual spreading, adjustable -Torque limiter, soft start, - band drain brake -with push segments -hydraulically actuated process equipment â completely. Hydraulic unit mass - L 3300 B 1500 H 1500 mm

Technical data: -Bending mot. Automatic or manual mode -Bending performance square steel ST 37 up to approx. 25 mm -Bending performance ST 37 steel up to approx. 30 x 8 mm -Bending length betw. the adjustable 1000 mm turning units -Faceplate with various recording profile perforations -Tailstock / recovery storage -Delay start bending / bending length twisting preselection - right - left rotation -Space requirement approx. B 1750 x H 1100 X 500 mm -Drive 400 V / 0,75 kW -Weight approx. 150 kg

Working width: 3050 mm sheet thickness: 6 mm throat depth: back gauge: 650 mm power: 380 V, 16 kW space: 3680 x 2060 x 1870 mm weight: 7580 kg

Technical data: -maximum working width 750 mm -maximum material thickness approx. 1.0 mm -Beam + upper cheek fold away -Bending rail with cut-outs - space requirement approx. B 1000 x H 1100 x D 750 mm -Weight approx. 70 kg

Technical data: -Working width 1030 mm -Material thickness 1.25 mm -Roll diameter 55 mm -Upper roller swing -Rear and front wave about eccentric adjustable -Rear and front wave each with a Groove to round -for sheet metal with wire inlay -Space requirement approx. B H 1350 x 1050 x D 750 mm -Weight approx. 150 kg

Technical data: -Length approx. 1400 mm -Width approx. 980 mm -Plate thickness approx. 180 mm -Height with base 980 mm - 4 height adjustable table bases -div. recessed threaded bushings to the tightening of measuring systems - weight approx. 400 kg

Technical data: -Pressure capacity 2000 kN -Max working width 3100 mm -Stand round 3200 mm -Stand RADIUS 300 mm -Max mounted height 965 mm -Hub, or insertion depth Steplessly adjustable 0-400 mm -Plunger speed forward + reverse per 100 mm / sec -Operating speed in 9 steps selectable 1-10 mm / sec -Drive 400 V / 26.5 kW - space requirement approx. B H 4400 x 3500 X 2200 mm -Weight approx. 18500 kg -with: - CNC - control CYBELEC ModEva 15s BJ. 2007 -Back gauge with 4 controlled pneum. on the side and height-adjustable stop fingers -controlled bending AIDS in the velocity range -Hydr. -Pneum.. Clamp of the upper tool + substation witness -mot. Crowning / hydro cushion in the table -laterally movable support arms -E - foot switch -split pointed tool R 1-100 t / m, split die

Technical data: -Material thickness 1.25 mm -maximum throat depth 180 mm -Roller Center distance 63 mm -maximum thickness at 40 kg / mm² strength 1.25 mm -Working speed approx. 6 + 12 m / min -Drive: 400 V / 0.7 / 0,85 kW - space requirement approx. B 550 x H 1250 X 1000 mm -Weight approx. 120 kg -with: - E - foot switch

Technical data: -maximum working length 1250 mm -Stand round 1050 mm -Max pressing force 80 t -Stroke 250 mm -Stand RADIUS 300 mm -Max height betw. Table - press bar 560 mm -Lifting speeds -Backward speed idle max 100 mm / sec. -Forward speed 100 mm / sec. -Backward press speed max. 12 mm / sec. -Total power 15 kW -Space requirement approx. B 1750 x H 3400 X 2000 mm -Weight approx. 8500 kg -with: - CNC - control CYBELEC DNC 7400 PSGY -controlled X - axis back gauge 5-1000 mm -Pneum. Z - axis in three stages. height-adjustable -manually movable and foldable stop fingers -controlled pneumatic die shift - hydr. Tool clamping -Manual crowning - 2 piece support arms -Pointed tool shared H 320 x L 1000 mm -Foot tool H 320 mm x L 1000 mm - universal matrix L 1000 mm

; ready for operation

Hydraulic press brake. Working length: 3.000mm. Pressing force: 200Tn. Back gauge.

Max cutting length: 2540 mm Max cutting rod: 4 mm steel Moto. Rear stop up to 750 mm side stop weight: 4000 kg