sheet metal working used for sale (3,358)

Key data: 6000 mm, 6 mm

Zschokke HAP 063a - 4/6 - Hydraulic press brake - Year of construction 1967 Technical data - Max. bending force: 630 t - Max. oil pressure: 400 atü - Column passage: 4100 mm - Max. bending length: 6000 mm - Projection: 375 mm - Stroke (adjustable): 0 - 500 mm - Distance of the tool holding surface: 300 - 800 mm Hydraulic pumps: - Main pumps: 2x 22 kW - Idle flow rate: 2x 153 l/min - Full load flow rate: 2x 33 l/min - Control pump: 0.75 kW Installation: - Footprint WxD: 6960 x 3250 mm - Height above ground: 4100 mm - Underfloor front: 2200 mm - Underfloor rear: 600 mm - Operating voltage: 3x 400 V / 50 Hz - Machine weight: 51000 kg

Offer 26165 Technical data - Two driven rollers, each roller hydraulically adjustable - For bending and conical rolling - Operation of separate control panel, with digital actual value display - and manual operation - Max. working width 1300 mm - Max. sheet thickness at 400 N/mm² without bending - With a bending diameter of 370 mm, 30 mm inside - With bending at bending diameter 370 mm, inside 25 mm - without bending with a bending diameter of 380 mm inside and - Width of 370 mm 45 mm - Upper roller diameter each 300 mm - Side roller diameter each 310 mm - Working speed 4.5 m/min - Drive 400 V / 30 kW - Required space W 5800 x H 1900 x D 2200 mm - Weight 8500 kg

Press brake manufactured in 2021. This KNUTH AHK H 30270 features a pressing force of 270 t and a bending length of 3,100 mm. It includes a Cyberlec Touch 8 Controller and a motorized CNC anti-winding system for enhanced precision. The machine is equipped with front support arms sliding on linear guides and a pedal drive for ease of operation. If you are looking to get high-quality bending capabilities, consider the KNUTH AHK H 30270 press brake we have for sale. Contact us for further details.

Key data: 2040 mm, 1 mm

with manual depth stop 5 - 500mm, can be operated from the rear, with extendable sheet metal support, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 2040 mm Blechstärke Stahl/Sheet thickness steel 1,25 mm Sheet thickness Alu 1.75 mm Blechdicke VA/Sheet thickness stainless 0.80 mm Farbe/Colour grün Machine Weight: 650 kg Dimensions/Space requirment 2442 x 756 x 1056 mm Cutting gap adjustment without Automatic hold-down Backgauge min. 5 Back gauge max. 500 mm Machine Number: 3540

A CNC punching and laser machine from Trumpf requiring repair, including laser source and high-frequency generator, is available. Cutting force: 220kN, laser power: 1500W, clamping power: 11kW, weight: approx. 18000kg. Error message: NCK deleted and buffer battery empty. An on-site inspection is possible.

cutting capacity: 2,5 mm mmthroat: 750 mmround blank diameter max.: ca. 1500 mmweight of the machine ca.: ca. 800 kgincludes on set of new replacement toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 2 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis Baykal APHS 125040 press brake was manufactured in 2021. It features a bending length of 1250 mm and a pressing force of 40 tons, ensuring robust performance. The machine has a throat depth of 410 mm and a stroke of ram measuring 215 mm. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 125040 press brake we have for sale. Contact us for further details.

This full electric SAFAN E-Brake B 50-2050 was manufactured in 2017. It features a maximum pressing force of 500 kN and a bending length of 2050 mm. The machine includes a programmable backgauge with a maximum stroke of 550 mm and a robust weight of 4750 kg. If you are looking to get high-quality bending capabilities, consider the SAFAN E-Brake B 50-2050 press brake we have for sale. Contact us for further details.

This 7-axis Baykal APHS 21060 press brake was manufactured in 2021. It features a pressing force of 60 tons and a bending length of 2100 mm, providing robust performance for various applications. The machine includes a throat depth of 410 mm and a stroke of ram measuring 210 mm. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 21060 press brake we have for sale. Contact us for further details.

This full electric drive SAFAN E-Brake Premium 80-2550 was manufactured in 2019. It features a pressing force of 80 tons and a bending length of 2550 mm, ensuring robust performance for various applications. The machine is equipped with a maximum stroke of 300 mm and a backgauge with 4 fingers for enhanced precision. If you are looking to get high-quality bending capabilities, consider the SAFAN E-Brake Premium 80-2550 press brake we have for sale. Contact us for further details.

sheet width - max.: 0650 mmcoil weight: 2,00 tcoil internal dia.: 240-270 mmcoil outside - diam. ca.: 1500 mmexpansion: mechanisch brake: über Motor speed: 5 m/mintotal power requirement: 0,55 kWweight of the machine ca.: 0,590 tdimensions of the machine ca.: 1,40 x 0,80 x 1,10 mMax. 650 mm without hoop-feeding armsControl system missingTemporarily connectedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Laser welding machine manufactured in 2014. This RONDA IMPIANTO CHIUSURA E SALDATURA LASER is designed for tube processing, currently configured for TIG welding and tack welding operations. It features a tube diameter range of 219 – 1,500 mm and a tube thickness of 3 – 12 mm. The machine operates with 8 pushers and is controlled from an external workstation. If you are looking to get high-quality welding capabilities, consider the RONDA IMPIANTO CHIUSURA E SALDATURA LASER machine we have for sale. Contact us for further details.

This 4-axis VOORTMAN VCS Thermo was manufactured in 2013. It features a multi-axis automated chamfering/bevel head and is equipped with a Hypertherm HPR260XD plasma source with Truehole technology. The machine includes an integrated Beckhoff operator console and Beckhoff nesting software. If you are looking to get high-quality plasma cutting capabilities, consider the VOORTMAN VCS Thermo plasma cutting machine we have for sale. Contact us for further details.

Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heaters, Container Rotating Device Welding Rotating Device Type W05 -Drive motor: -Load capacity: 9500 kg -Roller spacing: 600 - 1670 mm -Rollers: Ø 395 mm -Rolling speed: 0.2 to 1.45 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 2770/1120/H560 mm / 2350/990/H560 mm -Weight: 2510 kg

Punching machine, hydraulic punching machine, hydraulic press, hydraulic press -Insert tool -Width: 290 -Length: 550 -Height: 260 -with hydraulic unit -Steering -Foot switch -Dimensions: 800/700/H1300 mm -Weight: 400 kg

chamfer lenght: 1530 mmplate thickness: mmdistance between columns: 1530 mmpressure: 40 tstroke length max.: 300 mmtravel -x axis: 500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 3020 mmplate thickness: mmdistance between columns: 2555 mmpressure: 220 tstroke length max.: 350 mmtravel -x axis: 750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A hydraulic Euromac notching machine is available. Notching capacity steel/stainless steel: 6mm/5mm, blade length: 220mm, working angle: 90°, angle adjustment: 30°-140°, stroke rate: approx. 50/min. Machine dimensions X/Y/Z: approx. 1100mm/950mm/1300mm, weight: approx. 800kg. An on-site inspection is possible.

: 3050 mm: 06,5 mm: -: 0,5-2,5 °: 1000 mmwork height max.: 770 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tube cutting machine manufactured in 2021. This HSG HS-TL220 features a powerful 3000 W fiber laser and a maximum no-load speed of 110 m/min. It is capable of processing round tubes with diameters ranging from Ø20 to 210 mm and square tubes from 20 × 20 mm to 150 × 150 mm. If you are looking to get high-quality tube cutting capabilities, consider the HSG HS-TL220 machine we have for sale. Contact us for further details.

This 3-axis SEI Laser INFINITY 5070 V300 was manufactured in 2022. It features a working area size of 500 x 700 mm and a Z-axis guide of 650 mm. The machine is designed to support materials with a maximum weight of 40 kg/m². If you are looking to get high-quality laser cutting capabilities, consider the SEI Laser INFINITY 5070 V300 CO2 laser cutting machine we have for sale. Contact us for further details.

Inv. Num. : 9234 Type: TruLaser 1030 Producer: Trumpf Created: 2024 Parameters: Control system: SINUMERIK 840D SL Maximum power: 10 kW Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting (stainless steel): 40 mm Maximum sheet thickness when cutting (aluminium): 30 mm Maximum sheet metal cutting thickness (steel): 35 mm Maximum sheet metal cutting thickness (copper/brass): 12 mm Feed length Z-axis: 115 mm Source: TruDisk 10 000 W Machine height: 2200 mm Machine length: 9300 mm Machine width: 4700 mm Machine weight: 5500 kg Equipment: Cross and longitudinal conveyors Pallet Changer

Key data: 4000

Dual station non-stop production Full enclosed safety protection Laser radiation & spark protection Intelligent safety system Long-term stability for heavy duty Suitable Industries Electrical enclosures, precision sheet metal, kitchenware, automotive accessories, clean workshops. Application Scenarios Medium-batch stable processing; dust-controlled environment; semi-enclosed safe operation; easy loading and unloading.

Key data: 3200 , 8 , 490

The dual servo pump controllde press brake adopts a dual servo drive pump control system. Compared with the electro-hydraulic synchronous press brake, it’s hydraulic synchronization work relies on high-power dual servo pumps and does not need to rely on a throttle valve to control the cylinder. The temperature of the hydraulic oil will not rise during operation, which extends the working life of the hydraulic system. Therefore, this model has the following advantages: electro-hydraulic synchronization, as well as high efficiency, energy saving, quietness, durability and other properties

Heavy-duty frame Adaptive follow-up support High precision pneumatic chuck Optional 3D bevel cutting Suitable Industries Tube furniture, fitness equipment, automotive exhaust, agricultural machinery, pipe distribution, guardrails & scaffolding. Gujdoza Rm Hspv Hcqcjc Application Scenarios Round/square tube cutting; holes, slots, arcs; short-run & mass pipe production.

This 3-axis Finn-Power LPE5 SWUH punch-laser combination was manufactured in 2002. It features a Siemens Sinumerik 840D CNC, a ROFIN-SINAR laser with 2.5 kW power, and a servo-electric punching force of 20 tons. The work surface is 2500×1250 mm, and it includes 20 tool stations with a max tool diameter of 89 mm. Consider the opportunity to buy this Finn-Power LPE5 SWUH punch-laser combination. Contact us for more information about this machine.

This Waterjet Italy WL510 was manufactured in 2022. Its a waterjet cutting machine designed for precision in cutting a wide range of materials. Ideal for industries requiring detailed and accurate cutting work. Contact us for more information.

Motor power: 5.4kW, max. sheet thickness: 3.5mm, max. clearance: 200mm, max. bending capacity stainless steel/aluminum: 2.6mm/4.2mm, machine dimensions X/Y/Z: approx. 3650mm/1100mm/1600mm, weight: approx. 4500kg. An on-site inspection is possible.

CO₂ laser cutting machine manufactured in 2022. This KERN KER60120-KT500 OPF features a working area of 1524 × 3048 mm and a maximum workpiece height of 50 mm. It includes a powerful 500 W CO₂ laser and offers various work tables for different materials. If you are looking to get high-quality cutting capabilities, consider the KERN KER60120-KT500 OPF machine we have for sale. Contact us for further details regarding this machine.