sheet metal working used for sale (3,310)

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch-Shearing tool for channel steel: 120 mm-Type: 441215124901-Type: 441215124902-1x dimensions: 215/205/H30 mm-1x dimensions: 210/220/H30 mm-Weight: 19 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch,-Long hole punching tool: 10.5 x 23.5 mm-Stamping dimension: see photo with dimensions-Socket: Ø 30 mm-Dimensions: 230/200/H230 mm-Weight: 18 kg

2 column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame-Punching tool: 2 columns-Punching dimensions: see photo-Dimensions: 180/75/H1100 mm-Weight: 2.0 kg

Bending tool, die, upper knife, upper tool, straight tool-Tool: for press brake, 2 parts-Upper tool: dimensions 835 x 60 x 130 mm each-Dimensions: see the drawing in the photos-Total weight: 47.5 kg

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool radius: 10 mm -Dimensions: 45 x 190 mm -Length: 3000 mm -Weight: 240 kg

Bending tool, die, upper knife, upper tool, straight tool-Transfer in current condition as seen-Tool for: press brake-Tool: 45°-Thickness: 25 mm-Total length: 600 mm-Total height: 195 mm-Weight: 20 kg

Cutting blades, replacement blades for guillotine shears, replacement cutting edges, cutting blades, shear blades, flat steel blades for profile steel shears, lever shears -Cutting blade: Replacement blade, flat steel blade for profile steel shears, lever shears -Cutting length: 229 mm -Hole spacing: 120 mm / M16 see photos -Dimensions: 229/15/H63 mm- Weight: 1.6 kg

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool-Tool: for press brake, die tool-Measures: see drawing in the photos-Dimension: 3060/20 / H79 mm-Weight.: 30.3 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IP 10 with swiveling support ring -Clamping range: 0 - 50 mm -Load capacity: 6 t -Number: 8 terminals available -Price: per piece -Dimensions: 300/100/H430 mm -Weight: 25 kg

Inv. Num. : 9040 Type: EasyCut 9001.30 PG Producer: MicroStep Created: 2015 Parameters: Work table length: 9000 mm Work table width: 3000 mm Plasma Source: Formica ForCUT 163WDM

sheet width: 2070 mmplate thickness: 25 mmpre-bending: 18 diameter of upper rolls: 320 mmside roll diameter: 260 mmdiameter of lower rolls: 320 mm: 26 kW: 8100 kg: 4700 x 2000 x 2200 mmFeatures:- Hydraulic side roller adjustment- Conical bending device- 2 driven rollers- Hardened rollers- Hydraulic folding bearing- Mobile control panel- Foot switch- Safety device- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working range pipe Ø 6 to 42 mm - Bending, deburring, pre-assembly, sawing - Pipe extension length approx. 1,500 mm - Electro-hydraulic drive 1.5 kW - Weight approx. 700 kg - Incl. extensive tools - See photos

Finn-Power C5-25 - Sheet metal processing center / nibbler Siemens Sinumerik 840 D CNC control Extensive accessory package with approx. 400 tools Various spare parts included in the scope of delivery incl. enclosure of the system the machine is still in operation approx. 12000 operating hours Year of manufacture 2005 Technical data Capacity: - Max. sheet size (X x Y): 2530 x 1270 mm - Min. sheet size (X x Y): 300 x 100 mm - Max. sheet thickness: 8 mm - Max. sheet weight: 200 kg - X-axis length: 2584 mm (X-42... X2542) - Max. travel speed X-axis: 90 m/min - Y-axis length: 1317 mm (Y-25... Y1292) - Max. travel speed Y-axis: 60 m/min Lifting speeds: - High Light: 3000 rpm - Max. stroke rate (1 mm inseam length): 1100 rpm - Hole to hole (25 mm inseam length): 420 rpm - Distance (250 mm stride length): 150 rpm Punching: - Punching force: 300 kN - Punching stroke ...

Sell a notching machine from FIM in good condition!

Schechtl MA 300\1 electronic bending bench with foot pedal and hand depth stop in top condition with two new bending rails with legal warranty. Performance 1.25 mm Steel/ Alu 2 mm Usable length 3 meters Weight 1.5 tons Foot pedal Delivery possible Net price 13900.plus VAT There is an invoice with VAT shown If you have any questions, please contact us at 0160/7838365

Scissors

Scissors

Scissors

Scissors

Inv. Num. : 9031 Type: DEF FA 85 Producer: Soco Generated: Parameters: Machining length: 25–320 mm. Diameter: 25–85 mm.

Guillotine shears Manufacturer: BBM Type: TS-H25-16 Year of Make: 2001 Tool length: 2,550 mm Tool height: 80 mm Max. cutting thickness: 16 mm Max. cutting length: 2,530 mm Max. stroke rate: 15 1/min. Voltage: 400 V Frequency: 50 Hz Control circuit: 230 V Current consumption: 58 A Line fuse: 63 A Hydr. Connection data: 300 bar Pneum. Connection data: 6 bar Weight approx. : 11 to.

Machine Type: Profile Bending Machine Make: COMAC Type: 308 Year of manufacture 2004

Key data: 2540 mm, 1 mm

Pull-out sheet metal support at the front, sheet metal slide placed at the front under the machine, hand back gauge, automatic hold-down device, dimensional grooves in the table Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2540 mm Sheet thickness steel: 1.0 mm Sheet thickness aluminium: 1.5 mm Colour: blue Machine weight: 500 kg Dimensions: 2800 x 1500 x 1400 mm Cutting gap adjustment fixed Automatic hold-down Fixed cutting angle Back gauge: 650 mm Machine Number: 6.1-5005

Type of press: 2-cylinder synchronized press, pressing force: 125t, rated pressing force: 110t, bending length: 3000mm, ram stroke: 360mm, installation height: 540mm, distance between frames: 2550mm, hydraulic pressure: 256bar, weight: approx. 12000kg, control system: Cybelec DNC 7000 Graphic. Including various tools. The control system and the screen were renewed in mid/late 2025. An on-site inspection is possible.

Key data: 3 mm, 10 mm, 1 mm

Guillotine shears from a company liquidation Worked as a cutting center with automatic stacking device make Theis Control cabinet , built in 2015 new Front support arms 1,000 mm Service regularly performed according to plan 3,000 x 10 mm

Pressing force: 100 t Table length: 3000 mm Table width: 180 mm Passage between racks: electric motor: 10 kW Dimensions lxwxh: 3200x1450x2950 mm Weight: 8,000 kg In good condition, connected with the possibility of testing.

Key data: 1550 mm, 3 mm, 120 1/min

Qty. 1 Second-hand rotary shear cut-to-length line – still in operation Mfc.: PACO E.N.G Built: 2010 Still in operation! Raw Material: CR, EGI, GI, STS, AL, COLOR COATING COILS Tensile Strength Max.: 60 kg/mm2 Strip Width: 300 ~ 1,550 mm Thickness: 0.2 ~ 3.0 mm Coil Weight: 20,000 kg Sheet Length No. 1 Piler: 300 - 2,500 mm No. 2 Piler: 300 ~ 2,500 mm Piling Weight No. 1 Piler: 5,000 kg No. 2 Piler: 5,000 kg Coil ID: ∅508 mm, ∅610 mm = RUBBER SLEEVE Coil OD: ∅800 mm ~ Max. ∅2,000 mm

PROFILE BENDING ROLL SHAFTS OUTPUT 90 MM - PIPE BENDING ROLL MARGI CA90H2 YEAR 2007 SHAFTS SIZE 90 MM SET OF UNIVERSAL ROLLERS SIZE 260 MM LATERAL CORRECTOR ROLLERS LEFT/RIGHT SIDE SCREW ADJUST 4 SET OF ROLLERS FOR TUBE BENDING MM 61 – 78 – 90 – 116 – CONSOLE ELECTRIC MOVABLE ON WHEELS ALL THE COMMANDS CENTRALIZED DIGITAL POSITION READOUT OF BENDING ROLLS UPPER ROLL DRIVEN MOTORIZED ELECTRIC POWERED WITH GEAR UNIT SIDE ROLLERS HYDRAULIC ADJUSTMENT POWERED INDEPENDENT WITH PISTONS CAPACITY CHART IN ENCLOSED FOR MACHINE PERFORMANCES MACHINE REVERSIBLE CAN WORK WITH SHAFTS VERTICAL AND HORIZONTAL SAFETY AND EMERGENCY STOP INSTALLED WITH THE MACHINE MANUALS AND SCHEMATICS DOCUMENTS IN ORIGINAL DIMENSION 1260 X 1000 X H1260 MM -WEIGHT 1000KG

Key data: 3200 mm, 2 mm

used RAS 62.30 folding machine TurboBendPlus, a proven and reliable machine for professional sheet metal processing on roofs, walls and façade. The machine is ideal for tinsmiths, roofers, plumbers, locksmiths and metalworkers who rely on precise work results, robust technology and economic work. The RAS 62.30 impresses with its robust design and the high quality of the manufacturer RAS. It is ideally suited for everyday use Use in the trade and in the workshop. Used machines of this class offer an economically attractive opportunity to combine high-performance technology at a good price. The machine is equipped with a motorized depth stop, that facilitates precise and comfortable work. In addition, it has a segmented upper beam with a height of 110 mm, which makes the machine particularly can be used flexibly for different bending and bending work. This used RAS 62.30 is th ...